• 한국표면공학회지
• /
• 제29권2호
• /
• pp.132-139
• /
• 1996

Experiments on the automatic control of NaOH concentration and on the spraying condition of NaOH solution in the alkaline degreasing process of a continuous hot-dip galvanizing line have been carried out in order to improve degreasing performance of a galvanizing sheet steel using laboratory degreasing and galvanizing simulators. The concentration of NaOH for the good degreasing has been determined to be 6.0% and more and this concentration has been able to be automatically well controlled within $\pm$0.1% by employing a solution electrical conductivity meter under a flow injection analysis condition rather than by employing a sodium ion selective electrode in the degreasing simulator. Frequent blocking of the spraying nozzles of the solution has been reduced considerably by the set-up and periodical operation of an automatic valve system in the nozzle system. By applying this automatic valve system and by automatic controlling the NaOH concentration and other ordinary variables in the degreasing process, the degreasing performance has been increased from the conventional 76% to the new 85%.

• 한국응용과학기술학회지
• /
• 제27권3호
• /
• pp.273-281
• /
• 2010

Nickel recovery method was studied by the wet process from the catalyst used in hydrogenation process. Nickel content in waste catalyst was about 16%. At the waste catalyst leaching system by the alkaline solution, selective leaching of nickel was possible by amine complex formation reaction from ammonia water and ammonium chloride mixed leachate. The best leaching condition of nickel from mixed leachate was acquired at the condition of pH 8. LIX65N as chelating solvent extractant was used to recover nickel from alkaline leachate. The purity of recovered nickel was higher than 99.5%, and the whole quantity of nickel was recovered from amine complex.

• Journal of Electrochemical Science and Technology
• /
• 제13권2호
• /
• pp.213-226
• /
• 2022

In the present study, the corrosion behavior of aluminum Al-7075 tempered (T-6 condition) alloy was evaluated by immersion testing and electrochemical testing in 1.75% and 3.5% NaCl environment at acidic, neutral and basic pH. The data obtained by both immersion tests and electrochemical corrosion tests (potentiodynamic polarization and electrochemical impedance spectroscopy tests) present that the corrosion rate of the alloy specimens is minimum for the pH=7 condition of the solution due to the formation of dense and well adherent thin protective oxide layer. Whereas the solutions with acidic and alkaline pH cause shift in the corrosion behavior of aluminum alloy to more active domains aggravated by the constant flux of acidic and alkaline ions (Cl^- and OH^-) in the media which anodically dissolve the Al matrix in comparison to precipitated intermetallic phases (cathodic in nature) formed due to T6 treatment. Consequently, the pitting behavior of the alloy, as observed by cyclic polarization tests, shifts to more active regions when pH of the solutions changes from neutral to alkaline environment due to localized dissolution of the matrix in alkaline environment that ingress by diffusion through the pores in the oxide film. Microscopic analysis also strengthens the results obtained by immersion corrosion testing and electrochemical corrosion testing as the study examines the corrosion behavior of this alloy under a systematic evaluation in marine environment.

• 펄프종이기술
• /
• 제34권1호
• /
• pp.1-6
• /
• 2002

Alkaline sizing characteristics of TMP (thermomechanical pulp) handsheets with AKD (alkylketene dimer) were studied under various conditions. The sizing degree of TMP handsheet was much lower than that of chemical pulp. Especially, the sized TMP handsheet dried at $20^{\circ}C$ showed no sizing features, but sizing degree of TMP handsheet was clearly Increased by heat treatment at $105^{\circ}C$. The sizing effect of TMP was also improved by addition of $CaCO_3$, but it was not affected by pH. Therefore, sizing effect of TMP with AKD can be improved to some extent by controlling stock condition and heat treatment of handsheet.

• 전기화학회지
• /
• 제10권3호
• /
• pp.175-178
• /
• 2007

Pure iron, Fe-0.4, and 1.2 wt.%Cu alloys were examined by conducting the electrochemical techniques in the weakly alkaline solution, pH9, controlled by $Ca(OH)_2$, solution added with 0.02M NaCl. The $R_P$ measured from ac impedance, selected 10 kHz and 10mHz, in weakly alkaline solutions containing chloride ions indicated that the addition of copper up to 1.2wt.% into the pure iron significantly improved the pitting resistance of iron. In contrast to alloy, the pure iron showed the rapid pitting occurrences in drying period. During the drying period, the corrosion potential of pure iron was shifted to less noble value, pitting initiation.

• Nuclear Engineering and Technology
• /
• 제32권6호
• /
• pp.595-604
• /
• 2000

Flow-Accelerated Corrosion Behavior of SA106 Gr.C steel in room temperature alkaline solution simulating the CANDU primary water condition was studied using Rotating Cylinder Electrode. Systems of RCE were set up and electrochemical parameters were applied at various rotating speeds. Corrosion current density decreased up to pH 10.4 then it increased rapidly at higher pH. This is due to the increasing tendency of cathodic and anodic exchange half-cell current. Corrosion potential shifted slightly upward with rotating velocity. Passive film was formed from pH 9.8 by the mechanism of step oxidation and the subsequent precipitation of ferrous species into hydroxyl compound. Above pH 10.4, the film formation process was active and the film became stable. Corrosion current density showed increment in pH 6.98 with the rotating velocity, while it soon saturated from 1000 rpm above pH 9.8. This seems that activation process which represents formation of passive film on the bare metal surface controls the entire corrosion process

• 자원리싸이클링
• /
• 제18권2호
• /
• pp.39-50
• /
• 2009

포틀랜드 시멘트 제조 시 다량의 $CO_2$ 가스 배출로 많은 문제가 발생하고 있다. 그리고 화력발전소에서 발생하는 산업부산물인 플라이애시를 시멘트와 일부 대체하여 콘크리트에 재활용하고 있으나, 50% 이상을 해안 및 육상에 매립함으로써 환경적인 문제를 유발하고 있다. 최근 결합재로 시멘트를 사용하지 않은 알칼리 활성 콘크리트에 대한 연구가 활발히 진행되고 있다. 이 알칼리 활성 콘크리트는 시멘트 대신에 Si와 Al이 풍부한 플라이애시를 사용하여 알칼리 용액으로 활성화시킨 시멘트 ZERO 콘크리트로서 $CO_2$ 가스를 저감하는데 효과적이다. 본 논문에서는 시멘트를 전혀 사용하지 않고 결합재로서 플라이애시를 100% 사용한 알칼리 활성 콘크리트를 개발할 목적으로 알칼리 활성화제와 양생조건 등이 모르타르의 압축강도에 미치는 영향에 대해 검토하였다. 그 결과, 9M NaOH과 쇼듐실리케이트(Sodium Silicate)를 1:1의 비율로 제조한 알칼리 활성화제를 사용하고, $60^{\circ}C$에서 48시간 동안 앙생을 한 다음 기건양생을 실시할 경우 재령 28일에서 압축강도 70MPa의 알칼리 활성 모르타르를 제조할 수 있는 것으로 나타났다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제33권2호
• /
• pp.78-84
• /
• 2016

The antioxidant activity of silkworm powder treated by proteolytic enzyme was investigated. Total protein content of silkworm power was assayed using BCA, Bradford assays and SDS-polyacrylamide gel electrophoresis (PAGE) with alkaline protease treatment conditions including temperature and pH. The optimum condition of alkaline protease treatment for silkworm powder was found to be $60^{\circ}C$ and pH 7. The alkaline protease treatment resulted in increased contents of free amino acids, total polyphenol and total flavonoid compared to control group. The silkworm hydrolysates showed excellent antioxidant activities in various in vitro models such as 2,2 diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity, 2,2 - azino-bis(3-ethylbenzthiazoline-6)-sulfonic acid (ABTS) radical scavenging activity. These results provide useful information for using silkworm powder as an ingredient in functional foods and for exploiting alkaline protease treatment to improve the extractability and bioactivity of a raw material.

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.325-331
• /
• 2010

The alkaline dissolution behavior of sea-island type ultrafine nylon fiber were dependent on the concentration of NaOH and treatment time, and the most appropriate condition for alkaline dissolution was to treat with 20g/l NaOH for 30 min at $80^{\circ}C$. The dyeing properties of sea-island type ultrafine nylon fiber and regular nylon fiber were examined with 3 different types of acid dyes in this study. The dye uptakes of ultrafine nylon fiber were higher than regular nylon fiber because of large surface area per unit mass, which increased as the dye bath pH decreased. The dyeing rates on ultrafine nylon fiber were faster and dye exhaustions were higher than regular nylon fiber, however color strength and rating of wash fastness were lower. It was also found that levelling type acid dye showed fast dyeing rate on both nylon fibers than metal-complex and milling type acid dyes.

• 한국수산과학회지
• /
• 제16권2호
• /
• pp.147-153
• /
• 1983

To check the differences of the digestive enzymes by the bait habits and the proteolytic activities of the fissile extracts from the fish, omnivorous filefish (Navodon modestus), carnivorous cat shark (Scilliorhinus tarazame) and bloodsucking hag fish (Eptatretus burgeri) were sampled for this experiment. The activity of crude alkaline protease extracted from the muscle and the internal organs of the samples was determined with casein as substrate. The activity of the proteolytic enzymes showed remarkable differences by the organs of the fish. The optimum condition of the pretenses from the muscle revealed in range of pH 7.8-8.3, at $60-65^{\circ}C$, while those of the enzymes from the internal organs were at about pH 8.2, $45-55^{\circ}C$, but those of hag fish were at about pH 6.7, $45-55^{\circ}C$. The proteolytic activity of the enzyme of alimentary canal in filefish and in hag fish was 57 and 11 times stronger than that of muscle, respectively. The crude enzyme from the alimentary canal of file fish showed the strongest proteolytic activity in samples submitted and that of cat shark was the lowest. The activity of pancreatic alkaline protease in cat shark was 50 fold higher than that of muscle alkaline protease in the fish.