• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1210-1217
• /
• 2021

The analysis of ⁴¹Ca in concrete generated from the nuclear facilities decommissioning is critical for ensuring the safe management of radioactive waste. An analytical method for the determination of ⁴¹Ca in concrete is described. ⁴¹Ca is a neutron-activated long radionuclide, and hence, for accurate analysis, it is necessary to completely extract Ca from the concrete sample where it exists as the predominant element. The decomposition methods employed were the acid leaching, microwave digestion, and alkali fusion. A comparison of the results indicated that the alkali fusion is the most suitable way for the separation of Ca from the concrete sample. Several processes of hydroxide and carbonate precipitation were employed to separate ⁴¹Ca from interferences. The method relies on the differences in the solubility of the generated products. The behavior of Ca and the interfering elements such as Fe, Ni, Co, Eu, Ba, and Sr is examined at each separation step. The purified ⁴¹Ca was measured by a liquid scintillation counter, and the quench curve and counting efficiency were determined by using a certified reference material of known ⁴¹Ca activity. The recoveries in this study ranged from 56 to 68%, and the minimum detectable activity was 50 mBq g^-1 with 0.5 g of concrete sample.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.484-484
• /
• 2009

반도체 소자가 차세대 초미세 공정 기술 도입의 가속화를 통해 고속화 및 고집적화 되어 감에 따라 나노 (nano) 크기의 회로 선폭 미세화를 극복하고자 최적의 CMP (chemical mechanical polishing) 공정이 요구되어지고 있다. 최근, 금속배선공정에서 높은 전도율과 재료의 값이 싸다는 이유로 Cu를 사용하였으나, 디바이스의 구조적 특성을 유지하기 위해 높은 압력으로 인한 새로운 다공성 막(low-k)의 파괴와, 디싱과 에로젼 현상으로 인한 문제점이 발생하게 되었다. 이러한 문제점을 해결 하고자 본 논문에서는 Cu의 ECMP 적용을 위해 LSV (Linear sweep voltammetry)법을 통하여 알칼리 성문인 $NaNO_3$ 전해액과 산성성분인 $HNO_3$ 전해액의 전압 활성화에 의한 active, passive, transient, trans-passive 영역을 I-V 특성 곡선을 통해 알아보았고, 알칼리와 산성 성분의 전해액이 Cu 표면에 미치는 영향을 SEM (Scanning electron microscopy), EDS (Energy Dispersive Spectroscopy), XRD(X-ray Diffraction)를 통하여 전기화학적 특성을 비교 분석하였다.

• 한국환경과학회지
• /
• 제28권6호
• /
• pp.561-570
• /
• 2019

A zeolitic material (Z-Y2) was synthesized from Coal Fly Ash (CFA) using a fusion/hydrothermal method under low-alkali condition (NaOH/CFA = 0.6). The adsorption performance of the prepared zeolite was evaluated by monitoring its removal efficiencies for Sr and Cs ions, which are well-known as significant radionuclides in liquid radioactive waste. The XRD (X-ray diffraction) patterns of the synthesized Z-Y2 indicated that a Na-A type zeolite was formed from raw coal fly ash. The SEM (scanning electron microscope) images also showed that a cubic crystal structure of size $1{\sim}3{\mu}m$ was formed on its surface. In the adsorption kinetic analysis, the adsorption of Sr and Cs ions on Z-Y2 fitted the pseudo-second-order kinetic model well, instead of the pseudo-first-order kinetic model. The second-order kinetic rate constant ($k_2$) was determined to be $0.0614g/mmol{\cdot}min$ for Sr and $1.8172g/mmol{\cdot}min$ for Cs. The adsorption equilibria of Sr and Cs ions on Z-Y2 were fitted successfully by Langmuir model. The maximum adsorption capacity ($q_m$) of Sr and Cs was calculated as 1.6846 mmol/g and 1.2055 mmol/g, respectively. The maximum desorption capacity ($q_{dm}$) of the Na ions estimated via the Langmuir desorption model was 2.4196 mmol/g for Sr and 2.1870 mmol/g for Cs. The molar ratio of the desorption/adsorption capacity ($q_{dm}/q_m$) was determined to be 1.44 for Na/Sr and 1.81 for Na/Cs, indicating that the amounts of desorbed Na ions and adsorbed Sr and Cs ions did not yield an equimolar ratio when using Z-Y2.

• 플랜트 저널
• /
• 제18권1호
• /
• pp.55-61
• /
• 2022

본 연구에서는 역청탄으로 설계된 870MW급 유연탄 화력발전소를 대상으로 발전기 출력, 연소조건, 통풍조건을 일정하게 유지하면서 역청탄과 아역청탄을 혼합하여 연소함에 따른 슬래깅 발생 영향을 분석하였으며, 이에 따른 보일러 성능에 영향을 주지 않는 허용 가능한 혼탄 방안을 제시하였다. 아역청탄의 혼합 비율을 10%, 20%, 40%, 60%, 80% 등으로 조정하여 원소분석, 공업분석, 회융점 변화, 슬래깅 지수 등을 확인하였고, 적정 혼탄 조건은 아역청탄은 40% 이하로 혼탄하고, 회의 산성분 대비 염기성분 비율은 0.4이하 또는 1이상, 총 알칼리는 3.5이하, 융점 슬래깅 지수는 1,345℃ 이상, 원소분석 시 회함량은 13% 이하, 공업분석 시 회함량은 15% 이하, 초기용융점은 최소 1,200℃ 이상이어야 바람직하다고 판단된다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권1호
• /
• pp.112-122
• /
• 2013

Current status of soil contamination with fluorine and its source were investigated. The basic principles and procedures of various techniques for the analysis of fluorine contents in soil and solid phase samples were summarized in this review. Analysis of fluorine in solid matrices can be achieved by two types of techniques: (i) UV/Vis spectrophotometer or ion selective electrode (ISE) analysis after performing appropriate extraction steps and (ii) direct solid analysis. As the former cases, the standard method of Korean ministry of environment, alkali fusion-ISE method, pyrohydrolysis, oxygen bomb combustion, aqua regia digestion-automatic analysis, and sequential extraction-ISE method were introduced. In addition, direct analysis methods (i.e., X-ray fluorescence spectrometry and proton induced gamma-ray emission spectrometry) and atomic spectrometry combining with the equipment for introducing solid phase sample were also reviewed. Fluorine analysis techniques can be reasonably selected through site-specific information such as matrix condition, contamination level, the amount of samples and the principles of various methods for the analysis of fluorine presented in this review.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.486-486
• /
• 2009

In this paper, the current-voltage (I-V) curves, such as linear sweep voltammetry (LSV) and cyclic voltammetry (CV), were employed to evaluate the effect of electrolyte concentration on the electrochemical reaction trend. From the I-V curve, the electrochemical states of active, passive, transient and trans-passive could be characterized. And then, we investigated that how this chemical affect the process of voltage-induced material removal in electrochemical mechanical polishing (ECMP) of Copper. The scanning electron microscopy (SEM) and energy dispersive spectroscopy EDS) analyses were used to observe the surface profile. Finally, we monitored the oxidation and reduction process of the Cu surface by the repetition of anodic and cathodic potential from cyclic voltammetry (CV) method in acid- and alkali-based electrolyte. From these analyses, it was important to understand the electrochemical mechanisms of the ECMP technology.

• 한국미생물·생명공학회지
• /
• 제20권2호
• /
• pp.203-206
• /
• 1992

Demeclocycline 생산균주를 세포 융합하여 얻은 변이주를 이용하여 demethyltetracycline을 생산하기 위한 발효조건에 대해 연구한 결과, 발효 최적온도는 $25^{\circ}C$였고, 초기pH는 6.7였으며 발효기간 중 pH를 일정하게 조절하면 생산성이 저하되었다. 또한 식균량이 많을 수록 초기 당 소모와 점도가 높았는데, 이는 식균량이 증가함에 따라 발효가 급격히 진행됨을 나타냈다. 식균량은 5(v/v)일 때 생산성이 가장 높았으며 전배양 시간과 전배양 pH가 중요한 요인임을 밝혔다.

• 한국재료학회지
• /
• 제14권6호
• /
• pp.443-450
• /
• 2004

Parylene polymer thin film shows excellent homogeneous coverage chracteristics when it was deposited onto very complex three dimensional solid matters, such as deep hole and micro crack. The parylene deposition process can be conducted at room temperature although most of chemical vapor deposition processes request relatively high processing temperature. Therefore, the parylene coating process does not induce any thermal problems. Parylene thin film is transparent and has extremly high chemical stability. For example, it shows high chemical stability with high reactive chemical solutions such as strong acid, strong alkali and acetone. The bio-stability of this material gives good chances to use for a packaging of biomedical devices and electronic devices such as display. In this review article, principle of deposition process, properties and application fields of parylene polymer thin film are introduced.

• 분석과학
• /
• 제30권5호
• /
• pp.252-261
• /
• 2017

천연방사성핵종을 함유한 물질들은 인간 활동에 의해 인위적인 조작과정을 거치면서 농축되는 경우 방사선 노출에 따른 위해를 증가시킬 수 있다. 본 연구는 다양한 전처리 방법 및 분석 방법 간 비교를 통해 분석정확도를 평가하고 실내 건축자재 중 $^{232}Th$, $^{235}U$, $^{238}U$의 천연방사성핵종을 분석하기 위한 최적의 분석 방법을 확립하고자 하였다. ICP-MS를 이용한 실내 건축자재 중 천연방사성핵종 분석방법을 확립하기 위하여, 인증표준물질 5종을 왕수, 불산, 과염소산의 습식산화법과 용융법의 전처리법에 따른 U, Th의 분석 정확도 및 정밀도를 평가하였고, 최적의 전처리법으로써 용융법과 $Fe(OH)_3$ 공침법을 선정하였다. 확립된 분석방법을 석고보드, 벽돌, 시멘트, 페인트, 타일과 벽지 총 51 종의 실내 건축자재 시료에 적용하여 천연방사성핵종의 농도를 정량 분석하였다. 또한 동일한 시료에 대해 감마분광분석법 중 간접측정법을 사용하여 $^{238}U$, $^{232}Th$의 농도를 정량하고 ICP-MS 분석 결과와 비교하였다.

• Carbon letters
• /
• 제18권
• /
• pp.49-55
• /
• 2016

Refuse-derived fuel (RDF) produced using municipal solid waste was pyrolyzed to produce RDF char. For the first time, the RDF char was used to remove aqueous copper, a representative heavy metal water pollutant. Activation of the RDF char using steam and KOH treatments was performed to change the specific surface area, pore volume, and the metal cation quantity of the char. N₂ sorption, Inductively Coupled Plasma-Atomic Emission Spectrometer (ICP-AES), and Fourier transform infrared spectroscopy were used to characterize the char. The optimum pH for copper removal was shown to be 5.5, and the steam-treated char displayed the best copper removal capability. Ion exchange between copper ions and alkali/alkaline metal cations was the most important mechanism of copper removal by RDF char, followed by adsorption on functional groups existing on the char surface. The copper adsorption behavior was represented well by a pseudo-second-order kinetics model and the Langmuir isotherm. The maximum copper removal capacity was determined to be 38.17 mg/g, which is larger than those of other low-cost char adsorbents reported previously.