• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.13-18
• /
• 2003

The concrete structure can be easily damaged due to alkali-aggregate reaction. The alkali-aggregate reaction is a reaction between the alkalies(K or Na) in cement and an unstable mineral of the aggregates. There are several test methods to identify alkali reactivity of aggregates. In general, crushed stones are tested by petrographic examination, chemical method and 모르타르 바 method. This study tested alkali-aggregate reactivity of crushed stones that has different rock types such as granitic, volcanic, metamorphic and sedimentary rocks. Samples are collected from 12 local aggregate production companies. Alkali-reactivity of various rock types was evaluated by using ASTM C 227 and C 1260, and compared the test results of two test methods.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.91-92
• /
• 2016

Red mud is an inorganic by-product produced from the mineral processing of alumina from Bauxite ores. the development of alkali-activated slag-red mud cement can be a representative study aimed at recycling the strong alkali of the red mud as a construction material. This study is to investigate the pore characteristics of alkali-activated slag-red mud soil pavement according to the red mud content. The results showed that the porosity of alkali-activated slag-red mud soil pavement increased but the compressive strength of that decreased as the red mud content increased.

• Elastomers and Composites
• /
• v.51 no.2
• /
• pp.99-105
• /
• 2016

Alkoxy modified silicone (PAMS) was synthesized from hydroxyl-terminated polydimethylsiloxane (OH-PDMS) and vinyltrimethoxysilane (VTMO) under alkali catalyst (NaOH and KOH) at room temperature ($25^{\circ}C$) via condensation polymerization. Then, the structural verification of the synthesized PAMS was confirmed using $^1H$-NMR and FT-IR spectroscopy. The reaction rate of PAMSs was studied in terms of the concentration variation of alkali catalyst. The reaction rate increased with the concentration of alkali catalyst, but no correlation between conversion and concentration of alkali catalyst was observed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.433-436
• /
• 2005

The Fly-ash makes an Alumino-silicate gel when it mixes an alkali or a silicate solution. This Alumino-silicate gel is produced to the activation of an alkali silicate. And this act to the binder and makes a combine of particles. This study involved mechanical strengths of an Alumino-silicate Gel based the Fly-ash with an alkali solution. NaOH, KOH were utilized to an alkali solution. The alkali solution concentration was varied from 6 to 12M and the some added also the Meta-kaolin, Waterglass so that it made high the mechanical performance. Based on the experimental result, the compressive strengths increased as the quantity of the Meta-kaolin increased. And a mechanical strengths appeared according to the concentration of an alkali solution so that it was different. XRD, FT-IR have been used to characterize mechanical performance.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.1925-1928
• /
• 2012

Adsorption of alkali metals (Li, Na, and K) on the surface of magnesium oxide nanotubes (MgONTs) with different diameters was investigated using density functional theory. According to the obtained results, the most stable adsorption site was found to be atop the oxygen atom of the tube surface with adsorption energies in the range of -0.25 to -0.74 eV. HOMO-LUMO gap ($E_g$) of the tubes dramatically decreases upon the adsorption of the alkali metals, resulting in enhancement of their electrical conductivity enhancement. The order of $E_g$ decrement caused by the metal adsorption is as follows: K > Na > Li. The results suggest that the MgONTs were transformed from semi-insulator to semiconductor upon the alkali metal adsorption. Increasing the tube diameter, the HOMO/LUMO gap of the pristine tube is enhanced and adsorption energies of the alkali metals are decreased.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.155-156
• /
• 2017

Borosilicate glass was incorporated to improve the neutron shielding capability of concrete. Boron is a typical neutron shielding material, and it is contained in borosilicate glass. However, borosilicate glass causes alkali-silica reaction, which damages the concrete. Therefore, studied to reduce the expansion due to alkali-silica reaction and to improve the neuton shielding capability. The measurement of the expansion due to the alkali-silica reaction was based on ASTM C 1260. Experimental results show that the expansion due to alkali-silica reaction is reduced when borosilicate glass powder incorporated. In addition, the neutron shielding capability was significantly improved when the fine aggregate replaced with borosilicate glass.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.2
• /
• pp.49-56
• /
• 1993

This study was performed to investigate the pollution-free Korean traditional papermaking characteristics from paper mulberry by sulfomethylation pulping. Bast fibers were pulped by sulfomethylated cooking liquor, and by alkali and alkali-peroxide processes for the comparison. Sulfomethylated pulping resulted in the superior pulp with high yield and better quality compared to those of alkali and alkali-peroxide pulps. Since the pulp was so bright, there was almost no need additional bleaching. Pollutant loads of sulfomethylated pulping effluent were very low in terms of pH, turbidity and color compared to those of alkali. Pollution-free effluents was accomplished by simple filtering treatment with pine bark, charred rice hull and sawdust compost. Pine bark was the most effective in reduction rate of pollutants.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.7
• /
• pp.749-754
• /
• 1997

Rate constants have been measured spectrophotometrically for the reactions of alkali metal ethoxides (EtOM) with S-p-nitrophenyl 2-thiofuroate (1b) and 2-thiophenethiocarboxylate (2b) in absolute ethanol at 25.0±0.1 ℃. 1b is observed to be more reactive than 2b toward all the EtOM studied. The reactivity of EtOM is in the order EtOK > EtONa > EtO- > EtOLi for both substrates, indicating that K+ and Na+ behave as a catalyst while Li+ acts as an inhibitor in the present system. Equilibrium association constants of alkali metal ions with the transition state (KaTS) have been calculated from the known equilibrium association constants of alkali metal ion with ethoxide ion (Ka) and the rate constants for the reactions of EtOM with 1b and 2b. The catalytic effect (KaTS/Ka) is larger for the reaction of 1b than 2b, and decreases with decreasing the size of the alkali metal ions. Formation of 5-membered chelation at the transition state appears to be responsible for the catalytic effect.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.303-304
• /
• 2023

In this study, the effects of NaOH and KOH alkali activators of various concentrations on the performance of alkali activated waste concrete powder (WCP) was discussed. The samples activated by alkaline solutions were cured for up to 28 days and then compressive strength test was performed. These samples were also characterized using various techniques to explore the phase evolution, and microstructural changes. Results showed superior performance of NaOH-activated WCP. Additionally, activation of WCP by 8M concentrated alkali solutions improved the strength, reactivity and microstructure of alkali activated WCP binder sample.

• Journal of the Korean Society of Safety
• /
• v.30 no.4
• /
• pp.120-127
• /
• 2015

The aim of the present study is to investigate some characteristics of concrete according to addition of blast furnace slag and alkali-activator dosages. Blast furnace slag was used at 30%, 50% replacement by weight of cement, and liquid sulfur having NaOH additives was chosen as the alkaline activator. In order to evaluate characteristics of blast furnace slag concrete with sulfur alkali activators, compressive strength test, total porosity, chloride ions diffusion coefficient test were performed. The early-compressive strength characteristics of blast furnace slag concrete using a sulufr-alkali activators was compared with those of reference concrete and added 30, 50% blast furnace slag concrete. Also, Blast furnace slag concrete using sulfur-alkali activators enhanced the total porosity, chloride ions diffusion coefficient than two standard concrete. Alkali-activated blast furnace slag concrete was related to total porosity, compressive strength and chloride ions diffusion coefficient each others. As a result, it should be noted that the sulfur-alkali activators can not only solve the demerit of blast furnace slag concrete but also offer the chloride resistance of blast furnace slag concrete using sulfur alkali activators to normal concrete.