• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.21-36
• /
• 2005

Although the main geology of Korea consists of granite and gneiss, it Is not uncommon to encounter anisotropy Phenomena in crosshole radar tomography even when the basement is crystalline rock. To solve the anisotropy Problem, we have developed and continuously upgraded an anisotropic inversion algorithm assuming a heterogeneous elliptic anisotropy to reconstruct three kinds of tomograms: tomograms of maximum and minimum velocities, and of the direction of the symmetry axis. In this paper, we discuss the developed algorithm and introduce some case histories on the application of anisotropic radar tomography in Korea. The first two case histories were conducted for the construction of infrastructure, and their main objective was to locate cavities in limestone. The last two were performed In a granite and gneiss area. The anisotropy in the granite area was caused by fine fissures aligned in the same direction, while that in the gneiss and limestone area by the alignment of the constituent minerals. Through these case histories we showed that the anisotropic characteristic itself gives us additional important information for understanding the internal status of basement rock. In particular, the anisotropy ratio defined by the normalized difference between maximum and minimum velocities as well as the direction of maximum velocity are helpful to interpret the borehole radar tomogram.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.159-163
• /
• 2005

The propriety between suppliers and demanders in geometric design is very important. Although the final purpose of constructing roads is to concern about the driver s comfort, unfortunately, it has not been considered so far. We've considered the regularity and quickness in considering driver's comfort but there should be considered the safety for the accident as well. If drivers are appeared to be more speeding than designer's intention, there will be needed some supplements to increase the safety rate for the roads. Even if both an upward and downward section are supposed to exist at the same time for solid geometry of the roads like this, it is true that the recent design for the 3-D solid geometry section has been done as flat 2-D and the minimum plane curve radius and the maximum cant have been decided just by calculating without considering operating speed between an upward and downward section at the same point. In this investigation, thus, I'd like to calculate the safety of the cant by considering the speed features of the solid geometry for the first lane of four lane rural roads. To begin with, we investigated the driving speed of the car, which is not been influenced by a preceding car to analyze the influence of the geometrical structure by using Nc-97. Secondly, we statistically analyzed the driving features of the solid geometry after comparing the 6 sections, that is, measuring the driving speed feature at 12 points and combining the influence of the vertical geometry and plane geometry to the driving speed of the plane curve which was researched before. Finally, we estimated the value of cant which considers the driving speed not by using it which has applied uniformly without considering it properly, though there were some differences between a designed speed and driving speed through the result of the basic statistical analysis but by introducing the new safety rate rule, a notion of ${\alpha}$. As a result of the research, we could see the driving features of the car and suggest the safety rate which considers these. For considering the maximum cant, if we apply the safety rate, the result of this experiment, which considers 3-D solid geometry, there'll be the improvement of the driver's safety for designing roads. In addition, after collecting and analyzing the data for the road sections which have various geometrical structures by expanding this experiment it is considered that there should be developed the models which considers 3-D solid geometry.

• Journal of Chest Surgery
• /
• v.39 no.5 s.262
• /
• pp.347-353
• /
• 2006

Background: Despite recent advances in surgical technique and perioperative care of total anomalous pulmonary venous return (TAPVR), post-repair pulmonary vein stenosis (PVS) remains as a serious complication. We thought that the most important factors of TAPVR repair to prevent PVS were good exposure, proper alignment, and sufficient stoma size. We analyzed our experience retrospectively. Material and Method: Between Jan. 1995 and Feb. 2005, we studied 74 patients diagnosed with TAPVR suitable for biventricular repair. Supra-cardiac type (n=41, 55.4%) was the most common. Mean CPB time, ACC time, and TCA (40.5%, 30/74) time were $92.1{\pm}25.9\;min,\;39.1{\pm}10.6\;min$, and $30.2{\pm}10.7\;min$, respectively. Mean follow-up duration was $41.4{\pm}29.1$ months and follow-up was possible in all patients. Result: The median age and body weight at operation were 28.5 days ($0{\sim}478$ days) and 3.4 kg $(1.4{\sim}9\;kg)$. Early mortality was 4.1% (3/74). Causes of death were pulmonary hypertensive crisis, sepsis, and sudden death. There was PR-PVS in 2 patients (early: 1, late: 1). Both patients were cardiac type TAPVR drained to coronary sinus. Re-operations were done but only one patient survived. Cumulative survival rate in 5 year and percent freedom from PVS were $94.5{\pm}2.7%\;and\;97.2{\pm}2.0%$, respectively. Conclusion: There was no PVS in patients who underwent extra-cardiac anatomosis between LA and CPVC. Therefore it could be said that our principle might be effective in preventing PR-PVS in patients suitable two-ventricle.

• The Journal of Korean Society for Radiation Therapy
• /
• v.21 no.2
• /
• pp.89-95
• /
• 2009

Purpose: The purpose is to evaluate efficiency of the CT simulator QA phantom manufactured for daily QA. Materials and Methods: We made holes ($1{\times}100{\times}1\;mm$) to verify accuracy between image and real measurement in polystyrene phantom and made 1 mm holes to verify table movement accuracy at superior and inferior 100 mm to the center of the phantom and inserted radiopacity material. To evaluate laser alignment, we made cross mark on the right and left side at phantom and to evaluate CT number accuracy we made 3 cylindrical holes and inserted equivalence material of bone, water, air in them. After CT scanning the phantom, We evaluated accuracy between image and real measurement, accuracy of table movement, laser, and CT number using exposed image. Results: It was measured that the accuracy between image and real measurement was ${\pm}0.3\;mm$, table movement accuracy was ${\pm}0.3\;mm$, laser accuracy was ${\pm}0.5\;mm$ from 7th January to 7th March in 2008 as within the reference point ${\pm}1\;mm$. In the CT number accuracy of bone was ${\pm}10\;HU$, air was ${\pm}5\;HU$, water was ${\pm}5\;HU$ as within the reference point is ${\pm}10\;HU$. Conclusion: We was able to perform CT simulator QA and laser equipment QA more conveniently and fast using manufactured phantom at the same time. We will be able to make more accurate treatment plan that added to QA procedures using images at previous daily QA.

• The Korean Journal of Malacology
• /
• v.24 no.1
• /
• pp.73-80
• /
• 2008

Numerous morphological studies on N. samarangae have been well conducted over the last ten years. In this context, we have attemtped to do molecular phylogenetic analysis by using metallothionein (MT) gene from N. samarangae. To this end, we cloned the full length cDNA of MT from cDNA library of N. samarangae. The complete cDNA sequences were obtained from the expressed sequence tag (EST) sequencing project of N. samarangae, The coding region of 195 bp gives an amino acid sequence of 65 residues including methionine. There are 5' (61 bp) and 3' (48 bp) untranslated region at both ends of the Ns-MT cDNA sequence. The combined results from BLAST analyses, multiple sequence alignment and molecular phylogenetic study of Ns-MT cDNA indicate that N. samarangae has similarity to land snails such as Helix pomatia, Helix aspersa and Arianta arbustorum.

• Journal of Korean Physical Therapy Science
• /
• v.7 no.2
• /
• pp.615-628
• /
• 2000

This report is to study on the progress on which foot arch and planta has been changed according to body type based on 4 tilting of scapular & ilium. This study has been carried out to help contribute to some basic information like these. One was to find out how to assess and analysize the deformity of feet and ankle joint which may have the most impact on ideal alignment of anatomical posture. The other was to figure out how to diagnose and treat the deformity to get to the restoration. The results of this study is as followings; 1. The findings which had been made from 22 persons(50%) having left scapular and ilium forward tilt are as follows. 1) On the longitudinal length of the planta left parts of 18 persons(82%) are longer than the right one. On the transversel length of the planta right parts of 17 persons(77%) are longer than the left one. 2) On the size of medial longitudinal arch the left parts of 20 persons(91%) are more wider than the right one. 3) On the sign of supinated foot, the left parts of 18 persons(82%) are more common than the right one. 4) On the thickness of big toe, the left parts of 14 persons(64%) are thicker than the right one. 2. The findings which had been made from 15 persons(34%) having right scapular and ilium forward tilt are as follows. 1) On the longitudinal length of the planta right parts of 11 persons(73%) are longer than the left one. On the transversel length of the planta left parts of 13 persons(87%) are longer than the right one. 2) On the size of medial longitudinal arch the right parts of 13 persons(87%) are more wider than the left one. 3) On the sign of supinated foot, the right parts of 12 persons(80%) are more common than the left one. 4) On the thickness of big toe, the right parts of 7 persons(47%) are thicker than the left one. 3. The findings which had been made from 3 persons(7%) having left scapular and right ilium forward tilt are as follows. 1) On the longitudinal length of the planta right parts of 2 persons(67%) are longer than the left one. On the transversel length of the planta left parts of 2 persons(67%) are longer than the right one. 2) On the size of medial longitudinal arch the right parts of 3 persons(100%) are more wider than the left one. 3) On the sign of supinated foot, the right parts of 2 persons(67%) are more common than the left one. 4) On the thickness of big toe, the left parts of 2 persons(67%) are thicker than the right one. 4. The findings which had been made from 4 persons(9%) having right scapular and left ilium forward tilt are as follows. 1) On the longitudinal length of the planta left parts of 3 persons(75%) are longer than the right one. On the transversel length of the planta right parts of 2 persons(50%) are longer than the left one. 2) On the size of medial longitudinal arch the left parts of 3 persons(75%) are more wider than the right one. 3) On the sign of supinated foot, the left parts of 3 persons(75%) are more common than the right one. 4) On the thickness of big toe, the left parts of 3 persons(75%) are thicker than the right one.

• Journal of Korean Ophthalmic Optics Society
• /
• v.21 no.2
• /
• pp.99-108
• /
• 2016

Purpose: The present study was aimed to compare the tear volume and distribution by corneal eccentricity when fitted with spherical and aspherical RGP lenses. Methods: Spherical and aspherical RGP lenses were fitted in best alignment on a total of 77 subjects (136 eyes) in their twenties and thirties without any ocular disease or ocular surgery experience. The tear volume was analyzed by estimating the concentration of tear stained with fluorescein in the center of RGP lens as well as at the mid-peripheral and peripheral areas, and the difference of tear distributions was analyzed according to corneal eccentricity. Results: Tear distribution from the center to the peripheral area was not significantly different when spherical RGP lenses were fitted on the corneal eccentricities of e < 0.38 and $0.68{\leq}e$, indicating the relatively even tear distribution compared with other corneal eccentricity. In the case of aspherical RGP lenses, the difference of tear distribution between the central and peripheral areas was smaller than spherical RGP lenses. The significant difference of tear distribution according to RGP lens design was observed in the corneal eccentricity of 0.48 < e < 0.68. In other words, more even tear distribution was shown when aspherical RGP lenses were fitted on the cornea with eccentricity of $0.48{\leq}e<0.68$ and spherical RGP lenses were fitted on the cornea with eccentricity $0.68{\leq}e$. Furthermore, tear volume in the mid-peripheral area increased with higher corneal eccentricity. Conclusions: The results suggest that the appropriate selection of RGP lens design according to corneal eccentricity is necessary since tear volume and distribution by the regions of spherical and aspherical lenses are affected by corneal eccentricity.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.593-604
• /
• 1995

Mandibular incisor crowding is one of the most common features of malocclusion and is interesting characteristic in view of relapse and stability after orthodontic treatment. There are many potential factors in the etiology of lower anterior crowding. The tooth size variation is one of them, but biologic significance for the faciolingual width of the teeth has been overlooked. Peck and Peck reported that persons with ideal mandibular incisor alignment were shown to have incisor with smaller mesiodistal and larger faciolingual dimensions than persons with incisor crowding. On the basis of these findings they suggested MD/FL index as a clinical guideline for the assessment for lower incisor crowding. The present study was undertaken to examine the relationship between mandibular incisor crowding and mandibular incisor dimension, and determine their correlation with arch length discrepancy. 154 dental casts of people from 11 to 17 years of age were made, and were divided into normal group with irregularity index less than of 1, and crowding group with irregularity index greater than 1.The casts were measured and analyzed statistically. The results were as follows. 1. The mean mesiodistal width for mandibular incisor was larger in crowding group, and has significant difference in central inciosr measurement. There are no significant differences in the faciolingul width and MD/FL index. 2. Irregularity index has significant correlation coefficients with mesiodistal width and MD/FL index for mandibular incisor in crowding group, but no correlation with faciolingual width. It also has correlation with maxillary and mandibular arch length discrepancy, total tooth material, mandibular intercanine width, and mandibular inter first premolar width. 3. Upper and lower arch length discrepancy have significant correlation with mesiodistal width of mandibular incisor and overbite, but have no correlation with faciolingual width. Lower arch lenth discrepancy has significant correlation with MD/FL index for mandibular incisor and upper arch length discrepancy has correlation with MD/FL index for mandibular lateral incisor. 4. Significant differences were observed between normal and crowding group for the mandibular arch length discrepancy and overbite.

• Journal of dental hygiene science
• /
• v.10 no.2
• /
• pp.85-94
• /
• 2010

The purpose of this study was to research into the satisfaction with orthodontic treatment and the psychologically satisfactory condition to be expected, and to offer information in order to enhance medical-treatment service, by surveying the influential factors upon satisfaction with treatment targeting patients who receive orthodontic treatment. Targeting 382 patients who are under treatment at S dental clinic in Gyeonggi Province, B dental clinic in Daegu Metropolitan City, and Y dental clinic in Busan Metropolitan City, which specialize in orthodontic treatment, it carried out the direct interview survey of using the structured questionnaire from January 20, 2009 to February 28. The collected data was analyzed by using SPSSWIN 17.0 K. The following conclusions were obtained. 1. In the satisfaction with orthodontic treatment according to aesthetic factor, the group with bad aesthetic health condition was higher than the group with good health condition(p<0.05). As for the factor of tooth alignment, a case of good health condition was indicated to have higher(p<0.05) satisfaction than a case of being bad. 2. As for satisfaction according to necessity for orthodontic treatment, the satisfaction was high in a case of recognizing necessity much and of understanding medical-treatment contents much, and in a case of being well adjusted to the progression of orthodontic treatment. As for a psychological change after orthodontic treatment, the satisfaction was high in a case with a positive change(p<0.001). 3. The factors of influencing satisfaction with orthodontic treatment had significant influence in order of necessity for orthodontic treatment(p<0.001), adjustment to progression of orthodontic treatment(p<0.001), psychological change after orthodontic treatment(p<0.01), expectation level of dental health after orthodontic treatment(p<0.01), and understanding about treatment contents(p<0.01). As a result of research, the satisfaction with orthodontic treatment in patients with orthodontics is indicated to be relatively high. Thus, the careful consideration is considered to be probably necessary on qualitative part in medical treatment and on patients' expectation by grasping patents' mentally psychological condition.

• Journal of The Korean Association For Science Education
• /
• v.24 no.3
• /
• pp.442-458
• /
• 2004

This study was conducted to develop a plan for a large-scale implementation of the Girl Friendly Science Program based on the results of analysis and investigation of its current pilot implementation, Girl Friendly Science Program materials, which was first developed in 1999 with the support from Ministry of Gender Equality, consist of 1) five theme-based units that are specifically targeted individual students' unique ability, aptitude, and career choice, and 2) differentiated learning materials for 7th through 10th grade female students. All the materials are available at the homepage (http://tes.or.kr/gfsp.cgi) of 'Teachers for Exciting Science(the organization of science teachers in Seoul area)'. Since the materials are well organized by topic and grade level and presented in both Korean word process document and html format, anyone can easily access to the materials for their own instructional use. Ever since its launch the number of visitors to the homepage has been constantly increasing. The evaluation results of the current pilot implementation of the materials that targeted individual students' ability and aptitude showed that it scored high in terms of its alignment to the original purpose, content, level, and effectiveness to implement in classrooms. However, its evaluation scores were low in terms of the convenience for teachers to guide the materials, and its organization and operation. The results also showed a significant change in students' perception of science, and students' positive experiences of science through various interdisciplinary activities. On the other hand, the evaluation of students' experiences with the materials showed that students' assessment about an activity was largely depending on a success or failure of their experiences. Overall, students' evaluation of activities scores were low for simple activities such as cutting off or pasting papers. According to students' achievement test results, differences between pre and post test scores in the Affective Domain was statistically significant (p<0.05), but not in Inquiry Domain. Based on teachers observations, numerous schools where have run this program reported that students' abilities to cooperate, discuss, observe and reason with evidences were improved. In order to implement this program in a larger scale, it is critical to have a strong support of teachers and induce them to change their teaching strategy through building a community of teachers and developing ongoing teacher professional development programs. Finally, there still remain strong needs to develop more programs, and actively discover and train more domestic woman scientists and engineers and collaborate with them to develop more educational materials for girls in all ages.