• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.12 s.255
• /
• pp.1218-1227
• /
• 2006

In this paper a parametric study using an immersed boundary method has been carried out to investigate the effects of stable density stratification on the wakes past two identical three-dimensional hills aligned in tandem. The Reynolds number based on the uniform inlet velocity and twice the hill height was fixed at Re=300 while the Froude number based on the inlet velocity and the hill height was retained at Fr=0.2. Neutral flow without density stratification was also computed for comparison. Under a strong stratification, vertical motion of fluid particles over the three-dimensional hills is suppressed and the wake structures behind the hills become planar. Depending on the distance between the two hills, the flow pattern of each wake is significantly affected by the stratification. There is a critical hill distance at which flow characteristics drastically change. Qualitative and quantitative features of the wake interaction are reported.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.1
• /
• pp.35-42
• /
• 2005

Aligned multi-wall carbon nanotubes (MWNTs) were synthesized through the catalytic decomposition of hydrocarbons in a quartz tube reactor. In this study, we investigated the influence of gas flow rate of feedstock on the structure and growth rate of vertically aligned carbon nanotubes produced by the floating catalyst method. As the flow rate of feedstock increased, the nanotube diameter became smaller and the length became longer. Although the growth rate also increased with the raise of flow rate, the optimum flow rate of feedstock existed for the crystallinity of carbon nanotubes.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.11
• /
• pp.1041-1046
• /
• 2003

In order to improve the surface uniformity and the conduction properties of the fabricated YBCO thick films, a system that applies alternating field vertically to the EPD field has been developed for the first time and applied to the electrophoretic deposition process. The applied alternating electric field, so called Shaky Alternating Assisted Field, caused a force to be exerted on each YBCO particle and resulted in a shaking of the particle in the direction of applied electric field, accomplishing a uniform particle orientation. The usual commercial electrical power was used for the vertically applied alternating voltage and the induced electric field was 25-120 V/cm at 60Hz. The thick film fabricated by the method developed in this paper showed better surface uniformity without crack and porosity and improved film characteristics such as critical temperature (Tc,zero = 90 K) and critical current density (2354 A/$\textrm{cm}^2$), Therefore, it is expected that the shaky-aligned electrophoretic deposition method can be used to fabricate superconductor films through a simpler process and at less expense.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.3
• /
• pp.93-100
• /
• 2004

This paper presents a method to integrate the multiple impressions of a finger for improving fingerprint verification performance. Small-sized sensor has advantage that it can be used in many application fields. However, sufficiently large impression of fingerprint is not available due to the small sensing area, and this degrades the verification performance of the system. The proposed method overcomes this problem by combining the information of fingerprints for enrollment. To combine the fingerprints, the alignment process is important first of all. In the proposed algorithm multiple impressions of a finger are coarsely aligned using the corresponding minutiae pairs and then are finely aligned using the Distance Map. We construct an integrated template for enrollment in aligned coordinate system Since this integrated template represents the enlarged finger region, the problem that is occurred by using small sensor can be overcome. Experimental results show that the use of the integrated template of multiple impressions improves the performance of the fingerprint verification system.

• Carbon letters
• /
• v.14 no.2
• /
• pp.99-104
• /
• 2013

We investigated the effects of parametric synthesis conditions of catalysts such as sintering temperature, sorts of supports and compositions of catalysts on alignment and length-control of carbon nanotubes (CNTs) using catalyst powders. To obtain aligned CNTs, several parameters were changed such as amount of citric acid, calcination temperature of catalysts, and the sorts of supports using the combustion method as well as to prepare catalyst. CNTs with different lengths were synthesized as portions of molybdenum and iron using a chemical vapor deposition reactor. In this work, the mechanisms of alignment of CNTs and of the length-control of CNTs are discussed.

• 한국경영정보학회:학술대회논문집
• /
• 2008.06a
• /
• pp.270-275
• /
• 2008

The various research on Communities of practices (CoP) for propagation of softer type knowledge in new Knowledge Management (KM) strategy having been performed for past couple of years. CoP is one of effective process innovation tool for diffusion of knowledge. Based on CoP's voluntary and spontaneous characteristic, it performs a function of delivering softer type knowledge of workers to the other colleagues of organization. But one step further to CoP's function of propagation of internal knowledge, research on function of CoP's contribution in enterprise strategy are insufficient yet. This paper presents enterprise CoP should be managed and aligned to strategic objectives of enterprise, and also, suggests the methodology for CoPs to maintain a lifecycle as a tool to contribute in strategic goal attainment. Although CoPs are voluntary and spontaneous informal organization, it can display a contribution as tool for KM strategy when it is aligned to strategy properly and form efficient lifecycle.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.65-68
• /
• 1998

The mechanism of response time and viewing angle in in-plane switching ( IPS ) liquid crystal display ( LCD ) were investigated. The response time of photo-aligned IPS-LCD is fast compared with rubbing-aligned IPS-LCD on polyimide ( PI ) surface. The decay time $\tau$$\_$d/ is decreased with increasing the azimuthal anchoring energy A $\psi$ due to the steric interaction between the LC molecules and side chain of polymer. The viewing angle of IPS-LCD is increased by using photo-depolymerizatin method ; about ${\pm}$70$^{\circ}$at all direction.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1539-1543
• /
• 2006

We have developed self-aligned imprint lithography (SAIL) technology, an innovative method for roll-to-roll (R2R) fabrication of electronic devices on flexible plastic substrates. In this paper, we present the first R2R-produced ${\alpha}$-Si TFTs built on a polyimide substrate using the SAIL process, and prove the feasibility of this technology to enable R2R fabrication of flexible display active matrix (AM) backplanes with high precision and throughput.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.10a
• /
• pp.3-6
• /
• 2004

In order to reduce the excessive numerical dissipation which is induced when a grid system is not aligned with a discontinuity, a new spatial treatment of cell-interface fluxes is introduced. The M-AUSMPW+ in this paper has the formula that has an additional procedure of re-defining transferred properties at a cell-interface, based on AUSMPW+. The newly defined transferred property could eliminate numerical dissipation effectively in non-flow aligned grid system of multi-dimensional flows.

• Journal of the Optical Society of Korea
• /
• v.18 no.4
• /
• pp.395-400
• /
• 2014

We proposed a method for fast turn-off switching of a vertically-aligned liquid crystal cell by low-temperature curing of the polymer structure. We confirmed that the turn-off times of the fabricated cells were reduced significantly as the curing temperature was lowered to $-20^{\circ}C$. We accounted for the effect of low-temperature curing on the turn-off time by using a mathematical model and by observing images obtained via scanning electron microscopy. We also confirmed that low-temperature curing is more effective in reducing the response time when the device is operated at a low temperature.