• 센서학회지
• /
• 제6권1호
• /
• pp.35-42
• /
• 1997

전기적 제한 방출 시스템을 이용한 페록사이드 측정용 광바이오센서가 개발되었다. HPA를 포함한 PEOx와 PMAA의 고분자 복합체는 전류를 가하게 되면 붕괴되면서, HPA를 방출한다. 고분자 복합체의 붕괴 속도 및 방출되는 HPA의 양은 가해지는 전류의 세기에 비례했다. 페록사이드는 HPA와 페록시다아제효소에 의해 반응되어 형광 물질인 DBDA가 생성되었다. Xenon램프를 이용하여 DBDA를 여기시키고 발생되는 형광을 광섬유와 광다이오드어레이로 측정하였다. 측정된 DBDA의 형광의 변화는 페록사이드의 농도에 비례하였다. 페록시다아제 효소는 Ca-alginate를 이용하여 반응기내벽에 고정화시켰다. 개발된 광바이오센서는 페록사이드 0.025mM - 1.0mM 농도의 측정 범위를 가지며, 페록사이드의 단계 변화에 대한 반복성 있는 센서신호가 조사되었다. 효소 반응과 물질전달현상을 통하여 센서의 수학적 모델을 구성하였으며, 제안된 모델은 실험 결과와 잘 일치함을 알 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제31권5호
• /
• pp.390-397
• /
• 2006

이번 연구는 서로 다른 4개의 전자근관장측정기의 정확성을 측정하고 각각 0.5지점과 Apex지점에서의 일관성을 비교하고자 하였다. 40개의 발치된 상하악 소구치를 대상으로 치수강 개방 후 alginate model에 고정시키고 근관장을 측정하였다. 사용된 전자근관장측정기는 Root ZX (Merits, Tokyo, Japan), SmarPex (META, Seoul, Korea). Elements Diagnostic Unit (SybronEndo, CA, USA), E-Magic Finder Deluxe (S-Denti, Seoul, Korea)이다. 먼저 모든 치아에서 4개의 전자근관장측정기를 사용하여 0.5지점과 Apex지점에서 근관장을 측정하여 한 치아당 8개의 측정값을 얻었다. 다음으로 치아를 각 전자근관장측정기당 10개씩 4개의 그룹으로 나누어, 각각 제조사의 지시대로 Root ZX, Elements Diagnostic Unit 및 E-Magic Finder Deluxe는 "0.5"지점에서, SmarPex는 "Apex"지점에서 file을 치아에 cement로 고정시켰다. 이후 치근단부 4 mm를 삭제하여 100배율의 Image Proplus로 관찰하여 file 끝에서 주근단공의 외연까지의 실제거리를 측정한 후, 4개의 전자근관장측정기의 0.5지점 및 Apex지점에서 file끝과 주근단공 사이의 거리를 계산하여 비교하였다. 그 결과 Root ZX와 E-Magic Finder는 실험군 100%, SmarPex는 90%, Elements Diagnostic Unit는 70%에서 주근단공과의 거리가 임상적 허용범위인 ${\pm}0.5 mm$이내에 있었다. 또한 각 전자근관장측정기 마다 0.5지점과 Apex지점에서의 근관장의 표준편차와 사분위 범위를 구하여 두 지점간의 일관성을 비교한 결과, Root ZX, E-Magic Finder는 0.5지점과 Apex지점에서 비슷한 일관성을 보였으며 SmarPex와 Elements Diagnostic unit는 Apex지점에서 0.5지점보다 더 높은 일관성을 보였다. 전자근관장측정기는 근관 내의 조건에 관계없이 근첨협착부에서 항상 일정한 거리를 재현해 낼 수 있는 일관성이 중요하므로, 이렇게 0.5지점 또는 Apex지점에서의 일관성이 증명된다면 실제 임상에서 사용할 때 전자근관장에서 일정한 거 리를 가감하여 사용할 수 있다.

• 한국축산식품학회:학술대회논문집
• /
• 한국축산식품학회 2004년도 정기총회 및 제33차 춘계 학술대회
• /
• pp.384-387
• /
• 2004

The purpose of the present investigation was to develop a novel method for cell immobilization. Aureobasidium pullulans cells were mixed with an alginate solution, and the mixture was extruded to form small gel beads as hydrated- immobilized cells. The beads were then placed at $-15^{\circ}C$ for 6-24 h to induce freeze-dehydration. The freeze-dehydration resulted in shrinkage of beads due to water removal reducing bead volume by 82% and bead weight by 85%. The dehydrated beads were successfully used for the production of fructo-oligosaccharides in a model reactor system. This study showed that bioreactor performance can be improved up to 2 times by the use of the dehydrated beads.

• 한국식품과학회지
• /
• 제30권2호
• /
• pp.425-433
• /
• 1998

Bifidobacteria의 고농도 배양을 위한 배양액내 완충제로써 $CaCO_3$ 비드를 효율적으로 이용하기 위하여 유기산에 대한 비드의 반응특성과 유기산과 반응한 비드의 재사용 방안을 수학적 모델을 적용하여 검토하였다. 각각 다른 크기의 $CaCO_3$ 비드를 0.1 M의 혼합 유기산 용액과 Bifidobacterium longum ATCC 15707이 접종된 배양액에 각각 첨가하여 반응시킨 후, 비드 표면으로부터 감소한 $CaCO_3$ 양을 수학적 모델에 의하여 산출한 비드의 직경값과 micrometer를 이용하여 반응한 비드의 직경을 직접 측정한 값을 비교한 결과 서로 일치하였다. 그러므로, 수학적 모델이 유기산과 반응하는 $CaCO_3$ 비드의 반응특성을 설명하는데 유용하게 이용되어 질 수 있음을 확인하였다. 각각 다른 크기의 $CaCO_3$ 비드를 완충제로 사용한 배양액에 Bifidobacterium longum을 접종하여 $37^{\circ}C$로 20시간 배양한 후, $CaCO_3$ 비드의 완충효과와 직경의 변화 및 Bifidobacterium longum에 대한 증식도를 측정한 결과 비드의 직경이 작을수록 더높은 완충효과와 균증식도를 나타내었으며, 또한 비드의 직경이 크게 감소하였다. 균배양액으로부터 회수한 비드의 직경을 조사하여 반응된 비드의 전체표면적을 산출한 후 초기 사용한 비드의 전체표면적과 같도록 새로운 비드를 첨가하여 bifidobacteria를 배양한 결과 초기 사용한 비드의 완충효과와 유사한 결과를 나타내었으며, 또한 배양액내 균증식도도 같은 수준으로 증식되었음을 알 수 있었다. 따라서 bifidobacteria 배양에 완충제로 이용된 비드를 균배양에 완충제로 재차 이용할 경우 비드가 일정한 크기를 갖고, 감소한 표면적과 같은 양의 새로운 비드를 첨가한다면 사용된 비드의 재활용 가능성도 있다고 사료되었다.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제2권2호
• /
• pp.149-158
• /
• 1998

Biomass of non-living brown seaweed Sargassun fluitans pretreated with NaOH is capable of taking up more than $10\%$ $(q_{max}$ : 3.85 mmol/g for Al and 1.48 mmol/g for Cu) of its dry weight in the Al and Cu at pH of 4.5. However, the maximum Al and Cu uptakes calculated from Langmuir isotherm were 1.58 mmol/g for Al and 1.35 mmol/g for Cu at pH 3.5. Equilibrium batch sorption study was performed using two-metal system containing Al and Cu. The mathematical model of the two-metal sorption system enabled quantitative estimation of one-metal biosorption inhibition due to the influence of a second metal. NaOH-treated S. fluitans contained 2.19 mmol $(43\;wt.\%)$ carboxyl groups per gram of biomass. A modified form of Langmuir, which assumes binding of Cu as $Cu^{2+}$ and Al as $Al(OH)_2^+,$ was used to model the experimental data. This result agrees with the one of mono-valent sorption for Al in single-metal system. The modified Langmuir model gives the following affinity correlated coefficients: 0.196 for Cu and 6.820 for Ah at pH 4.5, and 2.904 for Cu and 3.131 for Al at pH 3.5. The interference of Al in Cu biosorptive uptake was assessed by `cutting' the three dimensional uptake isotherm surfaces at constant second-metal final concentrations. Equimolar final equilibrium concentrations of Cu and Al of 1 mM at pH 4.5 give Cu and hi uptakes reduced by $82.5\%\;and\;5.4\%,$ respectively. However, these values at pH 3.5 were $55\%\;(Cu)\;and\;31\%$ (Al).

• Archives of Plastic Surgery
• /
• 제34권1호
• /
• pp.18-23
• /
• 2007

Purpose: Anthropometry can be divided into two methods, direct anthropometry and indirect anthropometry. The most ideal and accurate method is a direct anthropometry. However, it is difficult to measure in the case of children because of poor cooperation, and it lacks re-productivity. Cast model has advantages of three dimensional featuring, inexpensive and easy fabrication. This study is conducted to find out an accuracy of indirect anthropometry on cast model by comparing it with direct anthropometry. Methods: Total 48 cleft lip nasal deformity patients (unilateral, 40; bilateral, 8) were included in this study. Cast models were made before surgery under general anesthesia with alginate impression material and model plaster. Eleven linear measurements among 7 landmarks were taken as direct anthropometry before surgery with Castroviejo spreading caliper. At the same time, indirect anthropometry on cast model was done at the same linear distances as well. Results: Of the total 11 linear measurements, both ala lengths, both columella lengths, nose width, projective distance between facial insertion points of the ala, projective distance between the alar base points, right nostril floor width, and columella width were statistically correlated between indirect anthropometry on cast model and direct anthropometry. However, the nasal tip protrusion and the left nostril floor width were not statistically correlated. Conclusion: Accuracy of indirect anthropometry on cast model can be influenced by cast model fabrication techniques and correct identification of landmarks. Nasal tip protrusion could be reduced by compression of the nasal tip in the process of cast model fabrication and nostril floor width can be varied by muscle relaxation of anesthetics and incorrect identification of subalare in cleft lip nasal deformity. If sufficient care is taken to make cast model and to define landmarks exactly, indirect anthropometry on cast model can be a reliable method as direct anthropometry.

• 대한치과보철학회지
• /
• 제8권1호
• /
• pp.37-41
• /
• 1968

The purpose of this paper is to evaluate the number of occlusal contacts in centric occlusion. The 50 strictly selected subjects, who have good natural dentition and occlusion, were impressioned with Alginate Impression material, and dental stone models were madel. After transfering the models from mouth to Hanau Articulator Model H2 by means of SM type Face-Bow, condylar guidances were registered, red articulating papers($13{\mu}$ in thickness) were inserted between upper and lower posterior teeth, and the red marked points and lines were counted as occlusal contact points. 1. The number of occlusal contact points in centric occlusion were 1st Molars 2nd Molars, 2nd Premolars and 1st Premolars in order. 2. The number of occlusal contact points of right side showed comparatively much more than those of left side. 3. The number of occlusal contact points of upper in Premolar area were much more than those of lower, and in Molar area were the reverse. 4. The total number of occlusal contact points in centric occlusion were approximately 105 points.

• 한국해양바이오학회지
• /
• 제12권1호
• /
• pp.50-58
• /
• 2020

Sphacelaria is a filamentous brown algal genus that can be epibiotic on macroalgae, marine plants, and sea turtles. Its important role in benthic ecosystems, exposure to different stressors (e.g., grazing), and use as a model organism make Sphacelaria ideal for assessing physiological responses of organisms to environmental inputs. Single-cell RNA sequencing is a powerful new probe for understanding environmental responses of organisms at the molecular (transcriptome) level, capable of delineating gene regulation in different cell types. In the case of plants, this technique requires protoplasts ("naked" plant cells). The existing protoplast isolation protocols for Sphacelaria use non-commercial enzymes and are low-yielding. This study is the first to report the production of protoplasts from Sphacelaria fusca (Hudson) S.F. Gray, using a combination of commercial enzymes, chelation, and osmolarity treatment. A simple combination of commercial enzymes (cellulase Onozuka RS, alginate lyase, and driselase) with chelation pretreatment and an increased osmolarity (2512 mOsm/L H₂O) gave a protoplast yield of 15.08 ± 5.31 × 10⁴ protoplasts/g fresh weight, with all the Sphacelaria cell types represented. Driselase had no crucial effect on the protoplast isolation. However, the increased osmolarity had a highly significant and positive effect on the protoplast isolation, and chelation pretreatment was essential for optimal protoplast yield. The protocol represents a significant step forward for studies on Sphacelaria by efficiently generating protoplasts suitable for cellular studies, including single-cell RNA sequencing and expression profiling.

• Membrane and Water Treatment
• /
• 제6권2호
• /
• pp.161-172
• /
• 2015

Forward osmosis (FO) is an emerging membrane technology with potential applications in desalination and wastewater reclamation. The osmotic pressure gradient across the FO membrane is used to generate water flux. In this study, flux performance and foulant deposition on the FO membrane were systematically investigated with a co-current cross-flow membrane system. Sodium alginate (SA), bovine serum albumin (BSA) and tannic acid (TA) were used as model foulants. Organics adsorbed on the membrane were peeled off via oscillation and characterized by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). When an initial flux of $8.42L/m^2h$ was applied, both flux reduction and foulant deposition were slight for the feed solution containing BSA and TA. In comparison, flux reduction and foulant deposition were much more severe for the feed solution containing SA, as a distinct SA cake-layer was formed on the membrane surface and played a crucial role in membrane fouling. In addition, as the initial SA concentration increased in FS, the thickness of the cake-layer increased remarkably, and the membrane fouling became more severe.

• Journal of Microbiology and Biotechnology
• /
• 제12권5호
• /
• pp.735-739
• /
• 2002

Large quantities of porcine hepatocyte aggregates with various degrees of aggregation (DA) could be obtained by controlling the suspension periods (0,9,24, and 48 h), and by entrapping the hepatocyte aggregates in model materials of encapsulation such as Ca-alginate and type-I collagen gels. The effects of DA on liver-specific functions of hepatocytes were evaluated in order to obtain optimum DA for the cell source of bioartificial liver (BAL) systems. Irregular rugged aggregates (size $75 \pm 28$ $\mu\textrm{m}$) farmed by 24 h of suspension culturing showed peak viability and hepatic functions such as ammonia removal and albumin secretion in the two types of entrapment systems, thus offering themselves as a stable cell source of a BAL system for hepatic functions and scale-up.