• 한국동물학회:학술대회논문집
• /
• 한국동물학회 1999년도 한국생물과학협회 학술발표대회
• /
• pp.150.2-150
• /
• 1999

To investigate the weathering soil buffering capacities of the artificial acidic precipitation, the weathering soils and their leachate solutions were sampled from the host rocks(granite;GR, rhyolite;RH, gabbro;GA, basalt;BA, two serpentinite;SE1, SE2 and limestone;LI) and analyzed for pH and chemical properties. 1n the soil pH of the GR and RH ,the acidic rocks, were 5.02 and 5.95, respectively. And the GA and BA, basic rocks, were 6.52 and 7.57. The SE1 and SE2 were 8.90 and 8.89. While the LI was 7.84. These results means the typical soil pH properties by host rocks. After the artificial acidic precipitation input 5OOml, the average changes of soil leachate solutions treated by pH levels(pH 5.0, 4.0 and 3.0), were pH 5.73, 5.00 and 4.40. in GR soil, and pH 6.19, 5.99 and 5.57 in RH. GA were pH 6.31, 6.04 and 5.86, BA were pH 7.05, 6.85 and 6.56 and SE1 were pH 8.31, 8.26 and 7.71. SE2 were pH 8.29, 8.24 and 7.96. LI were pH 7.55, 7.46 and 6.79. The soil leachate pHs from volcanic rocks were higher than those from the plutonic rocks and GR soils showed greater response than other soils. With increasing 100ml input-solution, the soil leachate pHs were mainly decreased. Cation concentrations, CEC, EC and total nitrogen concentrations of RH and BA soils, the volcanic rocks, were higher than those of GR and GA soil, the plutonic rocks. On the contrary, Al concentrations of the GR and GA soils were higher than those of RH and BA soils, partly because of high quartz content in GR and Al content in the biotite and plagioclase in GA.

• 한국세라믹학회지
• /
• 제30권12호
• /
• pp.1045-1053
• /
• 1993

Alumina hydrates were prepared by the neutralization of AlCl3.6H2O solution with NH3 gas diluted with N2 gas. The values of pH in reaction solution influenced the formation of alumina hydrates minerals. Amorphous alumina hydrates, for example, were formed at ${\gamma}$-Al2O3longrightarrow$\delta$-Al2O3longrightarrow$\theta$-Al2O3longrightarrow$\alpha$-Al2O3. (2) Bayeritelongrightarrowamorphouslongrightarrow${\gamma}$-Al2O3longrightarrow$\delta$-Al2O3longrightarrowη-Al2O3longrightarrow$\theta$-Al2O3longrightarrow$\alpha$-Al2O3. On the other hand, the shape of alumina hydrates whichw ere prepared by the reacton of Al2(SO4)3.16H2O solution and NH3 gas was spherical, the progress of its phase transformation with increasing temperature was amorphouslongrightarrow${\gamma}$-Al2O3longrightarrow$\alpha$Al2O3 in sequence.

• 한국재료학회지
• /
• 제14권4호
• /
• pp.293-299
• /
• 2004

Transition metal ions doped $TiO_2$ nanostructured powders were prepared with simply heating aqueous $TiOCl_2$ solutions, contained various metal ions (Ni, Al, Fe, Zr, and Nb) of 1.47 mol% added as metal-chlorides, at $100^{\circ}C$ for 4 hrs by homogeneous precipitation process under suppressing conditions of water vaporization. The characterizations for prepared $TiO_2$ powders were carried out to observe doping of metal ions, their concentrations and microstructures using XRD, UV-VIS (DRS), XPS, SEM, TEM and ICP. Also, photo-oxidative abilities were evaluated by decomposition of 4-chlorophenol (4CP) under ultraviolet light irradiations. No secondary oxide phases were formed in all the $VTiO_2$ powders, showing doping with various transition metal ions. When adding ions ($Ni^{2+}$ or$ Al^{3+ }$ and $Zr^{4+}$ ) having valance states or ionic radii greatly different from those of $Ti^{4+}$ , the $TiO_2$ powders of mixed anatase and rutile phases were formed, whereas in the case of additions of $^Fe{3+ }$ and $Nb^{ 5+}$ as well as no addition of metal ion the powders with pure rutile phase alone were formed. Among the prepared $TiO_2$ powders, Ni$^{2+}$ doped $TiO_2$ powders, containing a small amount of anatase phase, showed excellent photo-oxidative ability in 4CP decomposition because of relative decreases in electron-hole recombination and poisoning of $TiO_2$ surface during the photoreaction.n.

• 청정기술
• /
• 제22권1호
• /
• pp.9-15
• /
• 2016

Al/(Al+Zr)의 몰 비를 달리하여 xAl-yZr 산화물 촉매를 공침법으로 제조하였고, 모델반응으로 이소프로판올 탈수반응을 수행하였다. 제조된 촉매는 X-선 회절분석, 시차 열분석법, 질소 흡착법, 암모니아 승온탈착법, 이소프로판올 승온탈착법 등의 특성분석을 수행하였다. 지르코니아에 알루미늄 종을 첨가하면 상대적으로 넓은 비표면적을 갖는 작은 입자를 얻을 수 있으며 지르코니아의 결정상변화를 억제시켰다. 암모니아 승온탈착으로 알루미늄의 몰 비가 증가함에 따라 상대적인 산양이 증가함을 확인하였고, 이소프로판올탈수반응에서 촉매 활성 또한 증가하였다. 이러한 촉매활성은 촉매의 비표면적, 산점, 상대적으로 용이한 이소프로판올의 탈착과 연관시킬 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2650-2656
• /
• 2013

Mesoporous alumina was synthesized using bayberry tannin (BT) as template. This novel synthesis strategy was based on a precipitation method associated with aluminum nitrate as the source of aluminum in an aqueous system. $N_2$ adsorption/desorption, XRD, SEM and TEM were used to characterize the as-prepared mesoporous alumina. The results showed that the mesoporous alumina possessed crystalline pore wall, high specific surface area, narrow pore distribution and excellent thermal stability. Moreover, the surface area and pore size of the mesoporous alumina can be tuned by changing the experimental parameters. Further, the mesoporous alumina was investigated as the support of palladium catalyst ($Pd-Al_2O_3{^*}$) for the hydrogenation of propenyl, styrene and linoleic acid. For comparison, the reference catalyst ($Pd-Al_2O_3$) prepared without barberry tannin was also employed for the catalytic hydrogenation. The experimental results showed that $Pd-Al_2O_3{^*}$ exhibited the superior catalytic performance than $Pd-Al_2O_3$ for all the investigated substrates, especially for the hydrogenation of linoleic acid with larger molecular.

• 한국표면공학회지
• /
• 제48권1호
• /
• pp.27-32
• /
• 2015

Advanced high strength steels undergo recrystallization annealing in reducing gas atmosphere before galvanizing to improve mechanical properties. The selective oxidations of elements such as Mn, Si, Cr and Al during annealing decrease wettability of liquid zinc, resulting in bare spots and other defects. In this work, Fe-3wt%Mn steel sheet was annealed at $780^{\circ}C$ for 1200 sec. in 5% $H_2-N_2$ atmosphere and then dipped into zinc bath held at $460^{\circ}C$, which contained 0.2wt% dissolved Al. MnO crystallines in the average size of 200 nm were formed on the surface after annealing. It is estimated that MnO has been detached into bath with the formation and growth of inhibition layer with longer immersion time during galvanizing. No evidence of aluminothermic reduction of MnO has been found in this study.

• 소성∙가공
• /
• 제33권1호
• /
• pp.12-17
• /
• 2024

Aluminum-zinc-magnesium alloy is a well-known alloy that is both strong and lightweight. Precipitation strengthening plays a significant role in the strength mechanism of this alloy, with nano-sized η-based precipitates being the representative precipitates. However, the growth of η precipitates can lead to a decrease in strength, necessitating research into ways to control their growth. In this study, we observed the atomic-level behavior of η₂ precipitates and discovered that the precipitates grew through a combination with magnesium after a zinc segregation layer was formed around them.

• 대한치과교정학회지
• /
• 제52권6호
• /
• pp.412-419
• /
• 2022

Objective: This study evaluated the effect of cyclic pre-calcification treatment on the improvement of bioactivity and osseointegration of Ti-6Al-4V mini-screws. Methods: The experimental groups were: an untreated group (UT), an anodized and heat-treated group (AH), and an anodized treatment followed by cyclic pre-calcification treatment group (ASPH). A bioactive material with calcium phosphate was coated on the mini-screws, and its effects on bioactivity and osseointegration were evaluated in in vitro and in vivo tests of following implantation in the rat tibia. Results: As a result of immersing the ASPH group in simulated body fluid for 2 days, protrusions appearing in the initial stage of hydroxyapatite precipitation were observed. On the 3rd day, the protrusions became denser, other protrusions overlapped and grew on it, and the calcium and phosphorus concentrations increased. The removal torque values increased significantly in the following order: UT group (2.08 ± 0.67 N·cm), AH group (4.10 ± 0.72 N·cm), and ASPH group (6.58 ± 0.66 N·cm) with the ASPH group showing the highest value (p < 0.05). In the ASPH group, new bone was observed that was connected to the threads, and it was confirmed that a bony bridge connected to the adjacent bone was formed. Conclusions: In conclusion, it was found that the surface treatment method used in the ASPH group improved the bioactivity and osseointegration of Ti-6Al-4V orthodontic mini-screws.

• 대한금속재료학회지
• /
• 제47권2호
• /
• pp.71-78
• /
• 2009

The precipitation behavior of solute carbon and nitrogen strongly affects the mechanical properties of low-carbon automotive panel. In the present study, the effects of aluminum and solute nitrogen on the bake hardenability and strain aging of extremely low-carbon steel with carbon content below 15 ppm has been investigated. The ferrite grain size and distribution of precipitates were varied with the amount of aluminum content of 0.003 to ~ 0.100 wt% in a constant solute carbon and nitrogen. With increasing the aluminum content, the ferrite grain size is increased and strain aging is delayed. The strain aging is also delayed by increasing the annealing temperature, although the ferrite grain size is not much changed.

• 열처리공학회지
• /
• 제11권4호
• /
• pp.268-273
• /
• 1998

Effect of aging treatment on the microstructures and mechanical properties of 6N01 Aluminium alloy was investigated by differential scanning calorimetry, transmission electron microscopy, microhardness measurement and tensile test. It was found that the precipitation sequence of 6N01 Aluminium alloy was GP zone ${\rightarrow}$ metastable hexagonal $Mg_2S_i({\beta}^{\prime})$,${\rightarrow}$ equilibrium fcc $Mg_2S_i({\beta})$, and the precipitates at peak aged condition were GP zones and ${\beta}^{\prime}$ phase. Microhardness changes during over aged condition showed very small decrease upon increased aging time. This result was attributed to the very slow transformation rate of ${\beta}^{\prime}$ to ${\beta}$. Maximum hardness(116 Hv) and tensile strength(312.6MPa) with 22.3% elongation were obtained from the specimen aged at $180^{\circ}C$ for 15hrs.