• 대한전자공학회논문지SD
• /
• 제47권7호
• /
• pp.8-16
• /
• 2010

본 연구에서는 산소분압조건이 radio 주파수(RF) 마그네트론 스퍼터링으로 증착된 Al이 도핑된 ZnO (AZO) 박막의 성질에 미치는 영향을 조사하였다. Hall, photoluminescence (PL), X-ray photoelectron spectroscopy (XPS) 측정들은 0.9의 산소분압으로 증착된 AZO 박막의 경우 p형 전도도를 나타내었지만 반면에 0 - 0.6 범위의 산소분압으로 증착된 AZO 박막의 경우는 n형 전도도가 관찰 되었다는 것을 보여주고 있다. 또한 PL 및 XPS 결과는 zinc vacancies 와 oxygen interstitials등과 같은 억셉터 같은 결함들이 0.9의 산소분압으로 증착된 AZO 박막 내에서 증가해서 그 결과 p형 전도도의 AZO 박막을 형성하였다는 것을 알려주고 있다. Hall 결과는 0 - 0.6 범위의 산소분압으로 증착된 AZO 박막을 투명 박막 트랜지스터 응용에서 전극층으로 사용할 수 있음을 가리키고 있다. X-ray diffraction 해석으로부터 더 큰 산소분압으로 증착 된 AZO 박막 들이 더 큰 tensile 스트레스 뿐 만 아니라 더 작은 grain 크기를 가지면서 더 악화 된 결정질 특성을 가진다는 사실을 확인 하였는데 이는 증착 도중에 더 많은 산소원자들이 주입되는 것과 관련이 있음을 알 수 있었다. atomic force 마이크로스코프의 연구에서 산소분압을 사용하여 증착된 박막에서 더 완만한 표면 거칠기를 관찰하였는데 산소원자들의 주입이 더 큰 비저항을 초래하였다는 것을 Hall 측정으로도 확인할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.329.1-329.1
• /
• 2014

In this paper, we report electrical, optical and structural properties of Al-doped zinc oxide (AZO) thin films deposited at different substrate temperatures and pressures. The films were prepared by radio frequency (RF) magnetron sputtering on glass substrates in argon (Ar) ambient. The X-ray diffraction analysis showed that the AZO films deposited at room temperature (RT) and 20 Pa were mostly oriented along a-axis with preferred orientation along (100) direction. There was an improvement in resistivity ($3.7{\times}10^{-3}{\Omega}-cm$) transmittance (95%) at constant substrate temperature (RT) and working pressure (20 Pa) using the Hall-effect measurement system and UV-vis spectroscopy, respectively. Our results have promising applications in low-cost transparent electronics, such as the thin-film solar cells and thin-film transistors due to favourable deposition conditions. Furthermore our film deposition method offers a procedure for preparing highly oriented (100) AZO films.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1260-1261
• /
• 2008

Aluminium doped zinc oxide (ZnO:Al) thin film has emerged as one of the most promising transparent conducting electrode in flat panel displays(FPD) and in photovoltaic devices since it is inexpensive, mechanically stable, and highly resistant to deoxidation. In this paper ZnO:Al thin film was deposited on the polyethylene terephthalate(PET) substrate by the capacitively coupled r.f. magnetron sputtering method. Wide ranges of bias voltage, -30V${\sim}$45V, was applied to the growing films as an additional energy instead of substrate heating, and the effect of positive and negative bias on the film structure and electrical properties of ZnO:Al films was studied and discussed. The results showed that a bias applied to the substrate during sputtering contributed to the improvement of electrical properties of the film by attracting ions and electrons in the plasma to bombard the growing films. These bombardments provided additional energy to the growing ZnO film on the substrate, resulting in significant variations in film structure and electrical properties. The film deposited on the PET substrate at r. f. discharge power of 200 W showed the minimum resistivity of about $2.4{\times}10^{-3}{\Omega}-cm$ and a transmittance of about 87%.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.123-123
• /
• 2015

Al doped ZnO(AZO) films as a transparent conductive oxide (TCO) electrode were deposited on glass, polyethylene naphthalate (PEN) and polyethylene terephthalate (PET) at room temperature by a conventional rf-magneton sputtering (CMS) and a facing target sputtering (FTS) using Al2O3 and ZnO targets. In order to investigation of AZO properties, the structural, surface morphology, electrical, and optical characteristics of AZO films were respectively analyzed. The resistivities of AZO films using FTS system were $6.50{\times}10-4{\Omega}{\cdot}cm$ on glass, $7.0{\times}10-4{\Omega}{\cdot}cm$ on PEN, and $7.4{\times}10-4{\Omega}{\cdot}cm$ on PET substrates, while the values of AZO films using CMS system were $7.6{\times}10-4{\Omega}{\cdot}cm$ on glass, $1.20{\times}10-3{\Omega}{\cdot}cm$ on PEN, and $1.58{\times}10-3{\Omega}{\cdot}cm$ on PET substrates. The AZO-films deposited by FTS system showed uniform surface compared to those of the films by CMS system. We thought that the films deposited by FTS system had low stress due to bombardment of high energetic particles during CMS process, resulted in enhanced electrical conductivity and crystalline quality by highly c-axis preferred orientation and closely packed nano-crystalline of AZO films using FTS system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.138-138
• /
• 2009

Al, Ga and In doped ZnO thin film were prepared by faing targets sputtering as a function of oxygen gas contents at R.T. Base pressure was $2{\times}10^{-6}torr$, and working pressure was 1mTorr. The properties of thin films on the electrical and optical properties of the deposited films were investigated by using a four-point probe (Chang-min), a Hall Effect measurement (Ecopia) and an UV/VIS spectrometer (HP). The minimum resistivities of AZO, GZO and IZO thin film were $6.5{times}10^{-4}[{\Omega}-cm],5.5{\times}10^{-4}[{\Omega}-cm]$ and $4.29{\times}10^{-4}[{\Omega}-cm]$. The average transmittance of over 80% was seen in the visible range.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.101-102
• /
• 2009

We described the growth of undoped ZnO thin films and their optical properties changing with a various growth temperature. The un doped ZnO thin films were grown on c-$Al_2O_3$ substrates using pulsed laser deposition (PLD) at room temperature, 200, 400, and $600^{\circ}C$, respectively. Field emission microscopy (FE-SEM) measurements showed that the grain size of undoped ZnO thin films are increasing as a increase of growth temperature. In addition, we were investigated that the structural and optical properties of undoped ZnO thin films by x-ray diffraction (XRD) and photoluminescence (PL) studied. Also, we could confirmed that the exciton luminescence was strongly related to charge trap by grain boundary of the samples using micro-PL measurement.

• Transactions on Electrical and Electronic Materials
• /
• 제14권6호
• /
• pp.321-323
• /
• 2013

100 nm thick Ga doped ZnO (GZO) thin films were deposited with DC and RF magnetron sputtering at room temperature on glass substrate and Al coated glass substrate, respectively. and the effect of the Al underlayer on the optical and electrical properties of the GZO films was investigated. As-deposited GZO single layer films had an optical transmittance of 80% in the visible wavelength region, and sheet resistance of 1,516 ${\Omega}/{\Box}$, while the optical and electrical properties of GZO/Al bi-layered films were influenced by the thickness of the Al buffer layer. GZO films with 2 nm thick Al film show a lower sheet resistance of 990 ${\Omega}/{\Box}$, and an optical transmittance of 78%. Based on the figure of merit (FOM), it can be concluded that the thin Al buffer layer effectively increases the performance of GZO films as a transparent and conducting electrode without intentional substrate heating or a post deposition annealing process.

• 한국정보통신학회논문지
• /
• 제14권3호
• /
• pp.691-698
• /
• 2010

본 연구에서는 RF magnetron sputtering 법으로 AZO 세라믹 타켓 ($Al_2O_3$ : 3 wt%)을 이용하여 Eagle 2000 유리 기판위에 기판온도 ($100{\sim}500^{\circ}C$)와 공정압력 (10 ~ 40 mTorr)에 따른 AZO 박막을 제작하여, 결정화 특성과 전기적 및 광학적 특성을 조사하였다. 모든 AZO 박막은 육방정계구조를 가지는 다결정 이었고, (002)우선 배향성이 관찰되었다. 기판온도 $300^{\circ}C$, 10 mTorr에서 제작한 AZO 막에서 가장 우수한 (002) 배향성을 나타냈으며, 이때의 반가폭 값은 $0.42^{\circ}$였다. 전기적 특성은 기판온도 $300^{\circ}C$, 10 mTorr에서 가장 낮은 비저항 $2.64{\times}10^{-3}\;{\Omega}cm$과 우수한 캐리어 농도 및 이동도를 $5.29{\times}10^{20}\;cm^{-3}$, $6.23\;cm^2/Vs$를 나타내었다. 모든 AZO 박막은 가시광 영역에서 80%의 투과율을 나타내었으며, 기판온도 증가와 공정압력 감소에 따른 Al 도핑효과의 증가로 밴드 갭이 넓어지는 Burstein-Moss 효과가 관찰 되었다.

• 한국결정성장학회지
• /
• 제6권4호
• /
• pp.493-500
• /
• 1996

Al이 2 wt% 포함되어 있는 Zn 금속타겟을 사용하여 반응성 직류 magnetron sputtering법으로 AZO(Aluminum doped zinc oxide) 투명전도막을 제조한 후 열처리함에 따라 변하는 박막의 전기적 광학적 특성을 조사하였다. 전이영역에서 증착된 막들은 비저항이 50 % 정도 감소하여 $1{\times}10^{-3}~3.5{\times}10^{-4}\;{\Omega}cm$로 전기적 특성이 향상되었으며, 높은 산소분압에서 산화물로 증착된 막의 비저항이 증착직후에는 $10^{3}\;{\Omega}cm$였으나 열처리 후에는 $2{\times}10^{-3}\;{\Omega}cm$로 감소하였다. 또 전이영역에서 증착된 막은 증착직후 59.4 %이던 평균투과율이 $400^{\circ}C$, 30분 열처리 후에는 77.4 %까지 향상되었다.

• 한국전기전자재료학회논문지
• /
• 제20권12호
• /
• pp.1072-1076
• /
• 2007

We prepared the Al doped ZnO (AZO) thin film on polyethersulfon (PES) without any substrate heating by Facing Targets Sputtering (FTS) system. FTS system has two different facing targets. One is ZnO doped the content of Al 2 wt% and the other is Zn in order to decrease resistivity. The electrical, structural and optical properties of AZO thin films were investigated. To evaluate the as-deposited thin film properties, we employed four-point probe (CMT-R100nw, Changmin), Surface profiler (Alpha-step, Tencor), UV/VIS spectrometer (HP), X-ray diffractometer (XRD, Rigaku) and Field Emission Scanning Electron Microscopy (FESEM, Hitachi S-4700). As a result, We obtained that AZO thin film deposited on PES substrate at a DC Power of 150 W, working pressure of 1 mTorr and $O_2$ gas flow ratio of 0.2 exhibited the resistivity of $4.2{\times}10^{-4}\;[{\Omega}cm]$ and the optical transmittance of about 85 % in the visible range.