• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.17 no.4
• /
• pp.55-62
• /
• 2009

The Prime objectives of this study are to identify and analyze possible solutions and select a solution for the specification and operation plan of the meteorological purpose aircraft in Korea. Infrastructure like meteorological purpose aircraft and aircraft operating systems should be set up and their efficient plan must be established to improve meteorological technic in Korea. As a result of the study, we have found that the turboprop engine powered aircraft is the most suitable to initial model for the meteorological purpose aircraft. It was found that the indirect operation method might be the best solution, also. The results of this study may be useful to make decision for selecting specification and operation of the meteorological purpose aircraft.

• Journal of the military operations research society of Korea
• /
• v.33 no.2
• /
• pp.1-15
• /
• 2007

Aircraft operation doesn't consider the fact which can became obstacles. Forecasting, Preparing and Planning can make effective aircraft operation. This study is the find out the method of the effective Aircraft military power management. The force try to analysis the obstancles, aircraft operation ability and prepared military power. This study was analysis by ARENA 10.0. The obstacles consider to four category; weather, CBR warfare. aircraft accident and battle damage. And This study conduct the sensibility which can influence the aircraft operation.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.4
• /
• pp.116-125
• /
• 2023

Gimpo International Airport is a strategically utilized airport based on government policy, but there are many residents living around the airport, so it is very sensitive to changes in airport operation. In the past, similar noise results were obtained for aircraft noise at Gimpo International Airport despite changes in aircraft types and an increase in the number of aircraft operating, and recently ICAO proposed a low-noise aircraft noise standard (Ch.14). Since the new standard has a noise reduction effect of up to 15dB compared to existing aircraft noise, ICAO and Europe EASA predict that future aircraft noise will be reduced if the latest technologies such as low-noise aircraft are applied. Therefore, this study establishes the aircraft operation performance and measured noise of Gimpo International Airport in 2022 as a baseline scenario, noise changes using various scenarios of introduction of low-noise aircraft, operation of mid-to-long-distance routes, and changes in future air traffic demand were analyzed using simulation.

• International Journal of Advanced Culture Technology
• /
• v.6 no.4
• /
• pp.87-96
• /
• 2018

Meteorological information is essential for the safe operation of aircraft. Many organizations both at home and abroad provide meteorological services for small aircraft flying at a low altitude as a part of open public service and have performed relevant studies. Recently, such a service has been expanded to an online platform in order to deliver information more efficiently. The ultimate goal of this study is to improve the meteorological service for small low-altitude aircraft that mostly travel a short distance for a short time. To achieve this goal, this study considered requirements for developing an effective information delivery system and conducted a survey of user requirements to derive the necessary information that could be used to develop a real service.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.1
• /
• pp.77-83
• /
• 2010

In this paper, we proposed new outworn aircraft management procedure. ROKAF has both good management skill and information system, AMMIS, regarding aircraft maintenance based on all kinds of aircraft's defects. To optimize and secure aircraft's operation, management of the outworn aircraft is very important for ROKAF. With respect to these outworn aircraft's defects and maintenance, we analyzed defects occurrence pattern of outworn aircraft by using AMMIS data and Market Basket Analysis, and found the specified association rules for each defect. By using these association rules, we developed new management procedure for outworn aircraft based on the results of affinity analysis. The management procedure in this paper will also be used to optimal operation and maintenance of other aircraft and weapon systems.

• Journal of Advanced Navigation Technology
• /
• v.27 no.2
• /
• pp.173-181
• /
• 2023

Aircraft carriers need to maintain an orderly flow of aircraft in order for military ships to conduct combat through aircraft. Maintaining aircraft flow is an important factor in strengthening ship and aviation safety. In order to maintain aircraft flow, it is essential to develop a state-of-the-art air control system that provides higher quality control information by simultaneously accommodating radar-based monitoring information and monitoring information based on CNS integrated technology. Based on this point, this study describes the function and operation method of specific control equipment for the operation of the Aviation Support System and Air Traffic Control System required to operate light aircraft carriers in Korea based on overseas cases.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.272-280
• /
• 2022

An aircraft carrier is a combat ship that acts as an aircraft base at sea and performs combat through aircraft mounted as a military ship operating the aircraft. The Navy proposed a 40,000-ton light aircraft carrier operation plan that could be equipped with vertical takeoff and landing fighter jets and helicopters around 2033, and based on this, this study examined the operation of aircraft control equipment among the aviation support systems required for operating light aircraft carriers in Korea. PriFly, TWR's ILARTS, ILM for airspace control, ASR, PAR, LAAS or RNAV, PALS (JPALS) for access control are required as essential equipment, and communication network and SCATT-16 are required along with URN-25 TACAN, ICLS (El/Az), ACLS OLS, MOVAS, IFLOLS, etc. This study consists of two parts, and part 2 will describe a specific control method on an aircraft carrier.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.1
• /
• pp.1-10
• /
• 2023

This study investigated the accident cases of the U.S. Air Force and the R.O.K. Army. It analyzed the accident factors of the unmanned aircraft system using case analysis on unmanned aircraft system operators of the R.O.K. Air Force. Following the analysis this paper suggested safety operation plans for the R.O.K. Air Force. The risk factors of unmanned aircraft system were summarized by collecting and analyzing accident cases of unmanned aircraft system by the U.S. Air Force, collecting and analyzing accident risk factors of RQ-4 operators of the R.O.K. Air Force. Through the analyzed risk factors, a safety operation plan for the semi-automatic unmanned aircraft system and the fully automatic unmanned aircraft system was presented.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.1
• /
• pp.115-121
• /
• 2020

Recently avionics equipment and its integration are most important part for implementing high performance aircraft system. This trends are emphasized in the military or special purpose aircraft development program. Flight Test Bed Aircraft (hereafter FTB A/C) - by modified commercial aircraft - was key solution to verify function and performance of avionics system for complex aircraft development program for a while, but there are no experience to use it in domestic airspace of ROK. This paper would like to address what act and regulation is necessary to perform flight operation of FTB A/C with keeping a airworthiness and airspace control policy. and then willing to propose what do we do for improving aviation industry.

• Journal of the military operations research society of Korea
• /
• v.30 no.2
• /
• pp.108-121
• /
• 2004

This paper deals with a procedure of changing the current inspection & replacement periods for ROKAF aircraft parts. ROKAF is mostly operating aircraft of foreign makes, and takes maintenance actions according to Technical Orders(TO.) published by foreign aircraft manufacturers. Therefore ROKAF inspects and replaces specific parts at the time noticed from T.O.. These inspection and replacement periods are determined by manufacturers according to the standard operating environment and parts' durability. But the standard operating environment Is different from operator's environment. Because of this difference, the inspection and replacement periods have to be changed according to operators' operation environment. It is resonable that the manufacturer, having design materials and life test data of parts, changes those periods together with materials of operators' operation environment. But we have many difficulties in obtaining the design materials and life test data. Then this paper proposes a procedure of changing the periods of aircraft's parts with life data obtained during operating aircraft. For the reliability analysis, a software of RELEST (Reliability Estimation Version 1.0) is used.