• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.12
• /
• pp.1073-1079
• /
• 2014

Aircraft parts are considered as a significant element for the continued airworthiness of the certified aircraft well as a partial component consisting of the new aircraft design. US FAA established the certification system of Parts Manufacturer Approval in 1965, which is contributing to the continued airworthiness of the aircraft in operation and to the expansion of worldwide market of aircraft parts. In this paper, we compared the differences of the certification systems between FAA Parts Manufacturer Approval and EASA European Part Approval, and proposed the rulemaking items to improve Korean Parts Manufacturer Certification System and to contribute to growth of aircraft parts industry.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.230-240
• /
• 2013

Human powered aircraft: the aim is to fly only by human power, features many challenging issues. Contrary to the general aircraft operated by an engine, human powered aircraft, that manoeuvres by lower power, requires additional consideration about weight, material, aerodynamical and structural analysis. Since this aircraft flies at a low speed, low Reynolds number flight will need to be taken into account. In this paper, SNU (Seoul National University) Human Powered Aircraft was designed by comparing it with the existing human power aircrafts, as well as by using theoretical analysis that obtains the design parameters. Also, this paper discuss about the manufacturing process using composite material for real human powered aircraft.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.180-185
• /
• 2013

In this study, preliminary design of human powered aircraft was performed by considering the aerodynamic performance. For this, overall weight including the aircraft and pilot was determined. Then, the main wing and horizontal/vertical tail were designed with appropriate selection of the airfoils and planform shapes. Based on these, three dimensional flow was calculated to obtain lift and drag coefficients and the position of center of gravity (CG). Consequently, it was shown that the lift and power of the aircraft satisfied the constraints of the minimum required lift and the pilot's available power. Also, the CG of the aircraft was located at aerodynamic center (AC) of the main wing, which guaranteed 26% of the static margin.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.1
• /
• pp.162-168
• /
• 2008

A design objective for variable stability flight control system is to develop a controller of in-flight simulation capability that forces the aircraft being flown to follow the dynamics of other aircraft. This paper presents a model-following variable stability control system (VSS) for in-flight simulation which consists of feedforward and feedback control laws, the aircraft dynamic model to be simulated, and switching and fader logics to reduce the transient effect between two aircraft dynamics. The separate design techniques for feedforward and feedback control law proposals are based on model matching and augmented linear quadratic (LQ) techniques. The system allows pilots to select and engage VSS mode, and when deselected, the aircraft reverts to the baseline flight control system. Both the baseline flight control laws and VSS control laws are computed continuously during flight. Initialization of the state values are necessary to prevent instability, since VSS control laws have integrators and filters in longitudinal, and lateral/directional axes. This paper demonstrates and validates the effectiveness and quality of VSS with F-16 models embedded in T-50 in-flight simulation aircraft.

• Journal of Korean Society for Quality Management
• /
• v.47 no.3
• /
• pp.467-478
• /
• 2019

Purpose: The purpose of this paper is to improve quality for water infiltration to FCISA during military aircraft operation. Methods: A series of troubleshooting studies were conducted to identify the root cause of the water infiltration and reproduce the defects through various simulation tests. And design improvement measures were derived, and countermeasures were taken to prevent recurrence of moisture inflow defects. Conclusion: FCISA operates a very important role in the operation of military aircraft, and defects due to water infiltration are very fatal to flight safety. In this study, the root cause was identified and the design improvement to prevent recurrence was carried out through the failure investigation performed in this study, and the FCISA was improved so that the flight safety was not affected. The results of this study will be valuable back data that can be reflected in the design process through Lessons-Learned in the design phase of the aircraft that will be developed in the future.

• Journal of Aerospace System Engineering
• /
• v.18 no.4
• /
• pp.61-69
• /
• 2024

With increasing interest in aviation leisure sports, the demand for ultralight aircraft has increased, highlighting the necessity for robust structural design of the aircraft. In response, this study conducted static structural analysis and free-fall analysis of fuselage frame of ultralight aircraft. Robust design and crashworthiness under operational load conditions and vertical impact scenarios were evaluated by assessing maximum stress and safety factors. Analyses were performed using finite element method-based software ANSYS Workbench. Results including stress distribution and strain were analyzed to verify the safety of the designed fuselage frame. Additionally, this study predicted excessive deformation and failure locations of the fuselage frame during vertical drop impacts.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.7
• /
• pp.566-573
• /
• 2017

A type certificate is required to ensure the safety of aircraft design. If a person is to pursue major design change to the certified aircraft, an applicant has to apply for a new type certificate, an amended type certificate, or a supplemental type certificate appropriately. Design changes to be applied for a supplemental type certificate are abstractly defined in ICAO, FAA, and EASA regulations. In this paper, authors reviewed certification procedures regarding design changes, analysed certification examples of leading countries, and presented the criteria to determine "major design changes not extensive" for a supplemental type certificate.

• International Journal of Aeronautical and Space Sciences
• /
• v.15 no.3
• /
• pp.309-319
• /
• 2014

This paper mainly focuses on the conceptual design and stealth performance of the three-surface military aircraft. A three-dimensional (3-D) digital mock-up of the three-surface strike fighter with stealth feature was designed and the schemes of carrying missiles were analyzed in CATIA. Based on physical optics principle and the Method of Equivalent Currents (MEC), a numerical simulation of the RCS feature of the aircraft was carried out with RCSPlus which is a software designed by Beihang University. The paper contributes to the RCS feature analysis of the whole plane and different parts on X-band, S-band and UHF-band and a comparison of RCS feature to Su-37 and T-50 military aircraft is drawn. On X-band, the pitch angle of the incident wave was $0^{\circ}$, and the result shows: (1) Compared with Su-37 aircraft, the forward scattering RCS of the three-surface strike aircraft was reduced to 14.9%, the side scattering RCS to 9.6% and the back scattering RCS to 40.2%. (2) Compared with T-50 aircraft, the forward scattering RCS was reduced to 38.61%, and the side scattering RCS to 67.26%. This paper should be useful for researchers in conceptual design and stealth technology of the military aircraft.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2013

To have the competitiveness in the future worldwide small aircraft market, we should be able to develop the aircraft which is highly safe, easy to fly, and having excellent flight characteristics. FBW(Fly-By Wire) system is essential for the enhancement of flight safety and control easiness. FBW system that has been applied only to the modern fighter and transport aircraft is recently applied to smaller aircraft such as regional aircraft, business aircraft and even small aircraft. The purpose of this research includes the development of flight control computer, the definition of FBW system component, the design concept of each component for redundant management, OFP(Operational Flight Program) development, FBW system integration and HILS(Hardware In-the Loop Simulation) verification environment to test this FBW system.

• Journal of Aerospace System Engineering
• /
• v.4 no.3
• /
• pp.34-38
• /
• 2010

ACN(Aircraft Classification Number) is allocated by marketing group during early stage of aircraft design phase and is a critical parameter to decide whether the designed aircraft can be landed or not in a certain airport. The loading on the main landing gear wheels, selection of main landing gear tire and estimation of ACNs for flexible and rigid pavements were done for the proposed medium-class aircraft. The estimated ACN values are compared with the similar class aircraft. And PCN(Pavement Classification Number) values of airport in Korea are surmmarized. Results showed that the currently proposed medium-class aircraft can land any airport in Korea.