• 수산해양교육연구
• /
• 제5권2호
• /
• pp.128-137
• /
• 1993

This paper presents a new concept to reduce turbulent frictional drag by injecting micro-bubble into buffer layer of turbulent boundary layer on flat plate. The buffer layer of boundary was specified by minus velocity gradient of law of the wall. When the buffer layer region of turbulent boundary layer is filled with micro-bubble of air and viscous of the region is kept low, the velocity profile in the region should be changed substantially. Then the Reynolds stress in the buffer layer region becomes less, which guide to higher velocity gradient there. It results in reduction of velocity gradient at the viscous sublayer, which gives the reduction of shear stress at the wall.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권1호
• /
• pp.83-88
• /
• 2016

This paper describes the test results of plant minimum stable load (Pmin) for Ilijan Power Plant. The test was conducted on May 13 through 14, 2015 to investigate the plant operating and equipment condition in accordance with "Ilijan Plant Performance Test Procedure on Plant Minimum Stable Load" [1]. This paper also contains the assessment of the impact of Pmin to plant operating parameters and possible technical operating issues when operating at lower loads and to recommend the safe minimum load operation of Ilijan per block. In addition, this paper describes the performance calculation results of efficiency and heat rate depending on the load level.

• 센서학회지
• /
• 제18권3호
• /
• pp.197-201
• /
• 2009

This paper studies on the noncontact displacement sensor system to detect the displacement of the cylinder rod. For an inexpensive and a simple process, magnetic scales are printed on the cylinder rod, and magnetized by the specially designed magnetizer that has an yoke through the alternation of N and S pole. Noncontact displacement sensor system consists of cylinder with magnetic scales, Hall sensor, linear guide, controller and display. The system can detect the displacement of moving cylinder with 5 cm/sec in the case of 1 mm magnetic scale. It shows a possibility of position detection of hydraulic cylinder and air cylinder.

• 한국농공학회지
• /
• 제7권1호
• /
• pp.843-849
• /
• 1965

Some simple devices to demonstrate important hydraulic principles to students are necessitated in fluid mechanics or hydraulics classes. These devices should\ulcorner be easy to make and operate with inexpensive cost. The writer has studied some simple demonstrhation apparatus of hydraulic principles which were made with cheap materials. The purpose of this paper is to present the results of the study. In this paper, hydraulic principles that can be demonstrated by using these apparatus are described, the plans of them are presented, and how to make them and what materiaIs to be used are briefly explained. An axial-flow fan is a device with which the flow of air is supplied for several purposes. It consists of a duct, a fan and a guide vane. It may be possible to demonstrate the principles of propeIler,drag force, lift, etc.

• 한국군사과학기술학회지
• /
• 제10권3호
• /
• pp.120-128
• /
• 2007

In order to reduce the lead-time and cost, the technology of rapid prototyping(RP) has been widely used. This paper describes the methodology to fabricate a large object by using the principle of rapid prototyping. By laminating thick and sloping polystyrene foam plates, we can make the large model which has three dimensional, continuous surfaces faster and easier than conventional processes. Estimated error was much smaller than other RP products which have stepped effect. For accuracy improvement and post processing, machined metal plates are added between the thick plates. To keep the continuity of surface and strengthen the model, pilot holes and guide rods are applied. By the methodology described in this paper, a missile body with flush air intake was fabricated.

• Journal of Korean Dental Science
• /
• 제15권1호
• /
• pp.75-83
• /
• 2022

Crown-type implant-assisted removable partial dentures (CIRPDs) can be a feasible treatment option for partially edentulous patients. Here we report a case with remaining unilateral mandibular teeth. Two implants were placed in the posterior portion of the mandible using a surgical guide, and a distal-extension removable partial denture with implant-supported surveyed crowns was fabricated. After 12 months, both the abutment teeth and implants were in good condition. The treatment outcomes were satisfactory in terms of masticatory function and esthetics. The advantages of CIRPDs and considerations for obtaining successful clinical outcomes with these dentures are also discussed.

• 대한기계학회논문집B
• /
• 제41권3호
• /
• pp.211-219
• /
• 2017

본 연구에서는 전산유체역학 프로그램을 이용하여 순환형공기분급기 내부유동 및 입자거동을 해석하였다. 주날개 및 분급날개의 회전속도 조건을 변화시키며 이에 따른 등급분급효율, 절단입경 및 분급첨예도 변화를 예측하였다. 주날개의 회전속도를 제어함으로써, 절단입경을 증가시킬 수 있었으나, 오염토양 분급에 적용할 수 있을 정도의 정확도를 확보할 수 없었다. 반면, 분급날개의 회전속도를 증가시킴으로써, 절단입경을 감소시킬 수 있었으며, 보다 정확하게 입자를 선별할 수 있었다. 결과적으로 주날개와 분급날개를 동시에 사용할 경우, 높은 분급첨예도 결과를 보이며, 우수한 분급특성을 유지할 수 있었다.

• 전기화학회지
• /
• 제18권4호
• /
• pp.172-181
• /
• 2015

고체산화물 연료전지는 다양한 응용분야에서 대체에너지로서 각광받고 있다. 본 논문은 평판형 anode 전극으로 들어가는 공기유량에 따른 SOFC의 I-V 그래프 특성에 대해 연구하였다. 본 연구를 위해, Butler-Volmer 반응속도 식이 상용 CFD코드인 FLUENT에 적용되었다. CFD로부터 얻어진 결과값은 문헌으로부터 참고한 실험데이터와 0.4 V ~ 1 V 범위에서 I-V 분극곡선이 잘 맞는 것을 보여줌으로써 그 유효성을 확인하였다. 연료전지의 수치적 계산은 각각 다른 유량조건 하에서 3D 구조를 이용하여 수행하였다. 결과는 수소, 산소 그리고 물의 농도 분포의 항목으로 제시하였다. 전산모사와 그 결과들은 Butler-Volmer 방정식을 사용자 정의 함수로 적용한 CFD기법이 공기 유량과 비표면적에 대한 조건을 확인하는데 사용될 수 있고, 작동조건 연구를 위한 지침이 됨으로써 연료전지 시스템의 성능을 향상시킬 수 있음을 보여준다.

• 산업경영시스템학회지
• /
• 제38권4호
• /
• pp.212-225
• /
• 2015

UAV (Unmanned Aerial Vehicle), the pilotless plane or drone, draws researchers' attention at these days for its extended use to various area. The research was initiated for military use of the UAV, but the area of applicable field is extended to surveillance, communication, and even delivery for commercial use. As increasing the interest in UAV, the needs of research for operating the flying object which is not directly visible when it conducts a certain mission to remote place is obviously grown as much as developing high performance pilotless plane is required. One of the project supported by government is related to the use of UAV for logistics fields and controlling UAV to deliver the certain items to isolated or not-easy-to-access place is one of the important issues. At the initial stage of the project, the previous researches for controlling UAV need to be organized to understand current state of art in local researches. Thus, this study is one of the steps to develop the unmanned system for using in military or commercial. Specifically, we focused on reviewing the approaches of controlling UAV from origination to destination in previous in-country researches because the delivery involves the routing planning and the efficient and effective routing plan is critical to success to delivery mission using UAV. This routing plan includes the method to avoid the obstacles and reach the final destination without a crash. This research also present the classification and categorization of the papers and it could guide the researchers, who conduct researches and explore in comparable fields, to catch the current address of the research.

• 한국항행학회논문지
• /
• 제24권3호
• /
• pp.205-211
• /
• 2020

배선 결함은 안전한 항공기 운항에 커다란 영향을 미친다. 그러나 배선 결함의 고장탐구 과정은 광범위하고 복잡한 배선 시스템과 설치 위치 때문에 매우 어렵다. 최근 국내 항공사에 배선 결함 고장탐구를 효과적으로 할 수 있게 해주는 시간영역 반사계(TDR; time domain refelectometer) 장비가 소개되었다. 하지만 TDR의 효과와 유용성이 검증되지 않아 대부분의 항공사 정비 부서에서 TDR은 실질적으로 거의 사용되고 있지 않다. 본 연구는 TDR이 항공기 배선에서 결함의 위치 및 유형을 식별하여 문제 해결에 적용될 수 있는지 여부를 결정하기 위해 수행되었다. 실제 항공기에 적용되는 다양한 전선 및 연결부품을 이용한 여러 실험 계획을 수립하여 관찰된 실험 결과를 장비 운용 가이드에서 제공된 데이터와 비교하였다. 실험 결과, 양쪽의 데이터가 유사함을 볼 수 있었으며 TDR은 실제 항공기 배선 결함 고장탐구시 활용 적합성이 있음을 확인하였다.