Journal of the Korea Institute of Military Science and Technology (한국군사과학기술학회지)

The Korea Institute of Military Science and Technology (한국군사과학기술학회)
권호 표지

Fabrication of a Large Object by Rapid Prototyping Technics

쾌속조형 원리를 이용한 대형 모델의 제작

  • Published : 2007.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

In order to reduce the lead-time and cost, the technology of rapid prototyping(RP) has been widely used. This paper describes the methodology to fabricate a large object by using the principle of rapid prototyping. By laminating thick and sloping polystyrene foam plates, we can make the large model which has three dimensional, continuous surfaces faster and easier than conventional processes. Estimated error was much smaller than other RP products which have stepped effect. For accuracy improvement and post processing, machined metal plates are added between the thick plates. To keep the continuity of surface and strengthen the model, pilot holes and guide rods are applied. By the methodology described in this paper, a missile body with flush air intake was fabricated.

Keywords

References

  1. J. P. Kruth, 'Material increase manufacturingep by rapid prototyping techniques', Annals of the CIRP, Vol. 40, No. 2, pp. 603-614, 1991 https://doi.org/10.1016/S0007-8506(07)61136-6
  2. A. Novc, S. Kaza, Z. Wang, C. Thomas, 'Techniques for improved speed accuracy in layered manufacturing', Solid Free Fabrication Symposium Proceedings, pp. 609-617, 1996
  3. Hope, R. L., Jacobs, P. A. and Roth, R. N., 'Rapid prototyping with sloping surfaces', Rapid Prototyping Journal, Vol. 3, No. 1, pp.12-19, 1997 https://doi.org/10.1108/13552549710169246
  4. 양동열, 이상호, 안동규, 최홍석, 박승교, '선형 열 절단 시스템을 이용한 단속적 재료 공급식 가변 적층 쾌속조형 공정 및 장치', 특허 2001-0070212, 2001
  5. 양동열, 이상호, 안동규, 최홍석, 박승교, '단속형 재료공급식 가변 적층 쾌속조형공정 및 장치 개 발에 관한 연구', 한국정밀공학회지, 제19권, 제2 호, pp. 95-105, 2002
  6. W. Rattanawong, S. H. Masood, P. Iovenitti, 'A volumetric approach to part-build orientations I rapid prototyping', Journal of materials processing technology, Vol. 119, pp. 348-353, 2001 https://doi.org/10.1016/S0924-0136(01)00924-4
  7. P. Kulkarni, D. Dutta, 'An accurate slicing procedure for layered manufacturing', Computer -aided design, Vol. 28, No. 9, pp. 683-697, 1996 https://doi.org/10.1016/0010-4485(95)00083-6