• 대한기계학회논문집B
• /
• 제23권2호
• /
• pp.272-280
• /
• 1999

A cycle analysis was achieved to predict the characteristics by comprehensive modeling and simulation of an air-cooled, double-effect absorption system using a new $H_2O/LiBr+HO(CH_2)_3OH$ solution. The simulation results showed that the new working fluid may provide the crystallization limit 8% higher than the conventional $H_2O/LiBr$ solution. With a crystallization margin of 3wt%(weight%), the optimal solution distribution ratio was found in the range of 36 to 40%. Variation of cooling air Inlet temperature has a sensitive effect on the cooling COP and corrosion problem. The simulation of heat exchangers with UA value revealed that the absorber and the evaporator are relatively important for an air-cooled system compared with the condenser and the low temperature generator. The effect of cooling air flow rate, circulation weak solution flow rate and chilled water inlet temperature were also examined. The new working fluid may provide the COP approximately 5% higher than the conventional $H_2O/LiBr$ solution.

• 대한기계학회논문집
• /
• 제17권8호
• /
• pp.2099-2109
• /
• 1993

A gas-fired 4RT absorption heat pump was designed as an air-conditioner for domestic use during the summer. The absorption heat pump is air-cooled. double-effect, $LiBr-H_{2}O$ system with parallel flow type. The performance of the absorption heat pump in the cooling mode of operation was investigated through cycle modeling and simulation to obtain the system characteristics with parameter changes. System parameters considered in this analysis were the inlet temperature of cooling air to the absorber, the working solution concentrations, the ratio of the amount of the weak solution from the absorber, and the LTD's of each heat exchange component. The optimum designs and operating conditions were determined based on the operating constraints and the coefficient of performance.

• 설비공학논문집
• /
• 제18권9호
• /
• pp.738-744
• /
• 2006

In order to utilize the condensation heat of refrigerants in condenser on the absorption chiller system, the solution cooled condenser (SCC) was proposed using the weak solution of absorber as a cooling medium. The increase of COP with the increase of UA of the solution cooled condenser was approximately 0.009 in maximum with single effect one, and is about maximum 0.008 in occasion of double effect one with series flow compared to that without. In the case of heat exchanger, effectiveness is about 0.85, it's increments are 0.008 and 0.0072, respectively. And solution cooled condenser is more effective device in the single effect absorption system than double effect system for the principle of operation. On the other hand, as the solution split ratio increases when the value of UA is fixed, COP is increased and as the solution split ratio increases when the value of UA is fixed, COP is increased. If the flow rate of cooling water or the value of UA is reduced in order to increases the heat recovery of solution cooled condenser, heat recovery of solution cooled condenser is increased a little but COP is decreased as the system pressure is increased.

• 설비공학논문집
• /
• 제4권4호
• /
• pp.332-341
• /
• 1992

An absorption heat pump cycle has been modeled and simulated to analyze the system performance of water-cooled, series-flow, double-effect absorption heat pump, which can be applied to a direct gas fired cooling system with the medium range of cooling capacity (15RT level). Effect of absorption cooling system parameters, such as concentration difference, inlet temperature of cooling water, 1st generator temperature, leaving temperature differences of condenser and evaporator and efficiency of solution heat exchanger, has been investigated in the view of system cooling performance.

• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.1999-2011
• /
• 1995

Computer simulation was conducted to study performance characteristics of air-cooled condenser of a double effect absorption heat pump with variations of saturation pressures and mass flow rates of the refrigerant ; volume flow rates, relative humidities and temperatures of the air The vertically installed condenser had the staggered tube array with continuous plate fins of wavy type. When the saturation pressure of the condenser was decreased from 760 torr to 20 torr, heat transfer rates and condensing rates of refrigerant were decreased. If excess refrigerant flows in the condenser, the pressure and saturation temperature of the condenser were increased which makes the refrigerating capacity of an absorption heat pump reduced.

• 한국산업융합학회 논문집
• /
• 제7권4호
• /
• pp.331-340
• /
• 2004

This paper presents a feasibility study of a fresh air load reduction system by using an underground double floor space. The fresh air is introduced into the double slab space and passes through the opening bored into the footing beam. The air is cooled by the heat exchange with the inside surface of the double slab space in summer, and heated in winter. This system not only reduces sensible heat load of the fresh air by heat exchange with earth but also reduces latent heat load of the fresh air by ad/de-sorption of underground double slab concrete. In this paper, we used a model for evaluation of fresh air latent heat load reduction by hygroscopic of air to earth exchange system taking into account coupled heat and moisture transfer of underground double floor space. In conclusion it shows the validity of the proposed method for a design tool and the quantitative effect of the system.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 1998년도 추계학술발표회 논문집
• /
• pp.249-254
• /
• 1998

This paper describes the study of developing air-cooled absorption system which uses a new working solution instead of LiBr solution to improve the performance of system. The absorption chiller-heater considered was an air-cooled, double-effect, $H_2O/LiBr+HO(CH_2)_3$ system of parallel flow type. In this study, we found out the characteristic of new working solution through the cycle simulation and compared the result that of LiBr solution to evaluate. The new working fluid has a wider working range with $8\%$ higher crystallization limit at the saturated refrigerant pressure of 0.8kPa. The optimum designs and operating conditions of air-cooled absorption system were suggested based on this cycle simulation analysis. It was demonstrated that new working fluid substantially improves the performance of the absorption refrigeration machine and is expected to increase the COP by as much as $5\%$.

• 설비공학논문집
• /
• 제20권10호
• /
• pp.662-668
• /
• 2008

The objectives of the present work are to investigate the influence of the solution cooled absorber(SCA), refrigerant drain heat exchanger(RSX), exhaust gas/solution heat exchanger(ESX) and high efficiency solution heat exchanger on COP for a double-effect series-flow absorption chiller. A simulation program has been prepared for the cycle analysis of absorption chillers. As a result, solution heat exchangers(LSX, HSX) are the most effective element for the COP than the others. In spite of the poor contribution to COP, SCA plays an important role to reduce the crystallization phenomena of LiBr solution at solution heat exchanger. And the optimum solution split ratio varies with the relative size of RSX and LSX.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.534-539
• /
• 2007

The objectives of the present work is to investigate the influence of the solution cooled absorber(SCA), refrigerant drain heat exchanger(RSX), exhaust gas/solution heat exchanger(ESX) and high efficiency solution heat exchanger on COP for a double-effect series-flow absorption chiller. A simulation program has been prepared for the cycle analysis of absorption chillers. As a result, Solution heat exchangers(LSX, HSX) are a most effective element for the COP than the others. In spite of the poor contribution to COP, SCA make a rule to reduce the crystallization phenomena of LiBr solution at solution heat exchanger. And the optimum solution split ratio are varied with the relative size of RSX and LSX.

• 생물환경조절학회지
• /
• 제21권1호
• /
• pp.1-11
• /
• 2012

관행 이중피복온실과 공기주입 이중피복온실에 대하여 보온, 난방, 환기, 냉방 등 환경조절에 따른 온실내부의 환경변화를 연중 측정하여 온습도 및 광환경 분포특성을 비교분석함으로서 기존 온실의 환경을 개선할 수 있는 방안을 제시하기 위해 수행한 연구결과를 요약하면 다음과 같다. 겨울철 야간에 난방시 공기주입온실과 관행온실의 커튼과 피복재 사이의 온도는 거의 비슷한 값을 보여주고 있어 보온효과는 거의 동일한 것으로 나타났다. 온실내부의 커튼 안쪽의 습도는 난방으로 인해 외부습도보다 낮게 유지되었으나 커튼과 피복재 사이의 습도는 거의 100%로 유지되었다. 주간의 우천시에도 두 가지 온실의 내부온도가 거의 비슷하여 보온효과는 동일한 것으로 나타났다. 주간에 천창환기시 두 온실 모두 일사로 인해 상하방향으로 온도의 편차가 크게 발생하였고, 공기주입온실이 관행온실에 비해 온도가 약간 더 낮기 때문에 환기효과가 더 우수한 것으로 판단된다. 온도분포와 마찬가지로 상하방향으로 습도편차가 크게 발생하였으며, 공기주입온실이 관행온실에 비해 습도가 약간 더 높게 나타나 환기효과가 더 우수한 것으로 판단된다. 야간에 천창환기시에는 두 온실 모두 주간과는 달리 일사가 없기 때문에 온실내부 전체적으로 균일한 온습도분포를 보여주고 있다. 간헐적 포그분사 냉방을 실시하였을 때 두 온실 모두 상하좌우로 비교적 균일한 온습도분포를 보여주었다. 연속 포그분사 냉방을 실시한 경우 전체적으로 균일한 온습도 분포를 보여주었으며, 평균 약 $3.5^{\circ}C$ 정도의 냉방효과가 있는 것으로 나타났다. 커튼과 지붕피복재 사이의 공간에 대한 상대습도와 절대습도의 변화를 분석한 결과 거의 커튼을 닫는 시점에서 피복재의 온도가 노점 온도 이하로 낮아지기 시작하기 때문에 커튼을 닫음과 동시에 제습기를 사용하여 지붕과 커튼 사이 공간의 공기에 함유된 수증기를 제거하면 지붕의 피복재에 발생하는 결로를 억제할 수 있을 것으로 판단된다. 피복재의 사용기간이 경과함에 따라 공기주입온실에 비해 관행온실이 광투과율이 더 감소하는 것으로 나타났다. 이는 온실내부 피복재를 권취식으로 개폐하는 과정에서 먼지와 결로로 인해 오염되기 때문인 것으로 판단된다. 따라서 피복재의 광투과율이 감소되는 것을 방지하기 위해서는 피복재의 권취식 개폐방식을 지양하는 것이 바람직할 것으로 판단된다. 결론적으로 온실의 이중피복 방법을 공기주입 이중피복형태로 하고 천창을 용마루 위치에 나비형태로 설치한다면 관행 이중피복 온실과 동일한 에너지절감효과를 유지하면서 광투과율을 현저히 개선할 수 있고 환기효율도 높일 수 있을 것으로 판단된다.