• 전력전자학회논문지
• /
• 제19권5호
• /
• pp.457-462
• /
• 2014

Given their low cost, single rolling piston compressors (SRPC) are utilized in low-power room air-conditioning systems. The SRPC cycle is composed of one compression and discharge process per mechanical rotation. The load torque is high during the compression process of the refrigerants and low during the discharge process of the refrigerants. This load torque variation induces a speed ripple and severe vibration, which cause fatigue failures in the pipes and compressor parts, particularly under low-speed conditions. To reduce the vibration, the compressor usually operates at a high-speed range, where the rotor and piston inertia reduce the vibration. At a low speed, a predefined feed-forward load torque compensator is used to minimize the speed ripple and vibration. However, given that the load torque varies with temperature, pressure, and speed, a predefined load torque table based on one operating condition is not appropriate. This study proposes an online load torque compensator for SRPC. The proposed method utilizes the speed ripple as a load torque ripple factor. The speed ripple is transformed into a frequency domain and compensates each frequency harmonic term in an independent feed-forward manner. Experimental results are presented to verify the proposed method.

• 전기학회논문지P
• /
• 제60권3호
• /
• pp.110-113
• /
• 2011

Platform Screen Door, PSD, is a device that seeks to prevent accidents with regards to falling off the platform and getting trapped between the trains, achieve improvements on the cleanliness of the air, address the accessibility issue of the disabled and the elderly and provide fresher environment on the platform in general. This is achieved by preventing health hazards and accidents from occurring through installation of fixed and moving doors between rail, tram and subway platforms and the railway. Domestic firms have achieved domestic production to a large degree in various Control Units including the Overall Control Unit and RF devices through investments in technology. Despite this, full domestic production of the core of the PSD system, Door Control Unit, DCU, is not yet achieved, having to install PSDs in a relatively short period of time. Currently, controllers with DC motors are developed for installation or one is faced with having to import foreign produced controllers. In this research, the control unit prototype using the BLDC motor was domestically produced. The performance of the control unit was rigorously tested through installation on Eun-Ha Rail on Wol-Mi Island.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.466-469
• /
• 1995

This paper presents a design and performance of the 6 D.O.F linear motion table with a magnetic bearing suspension. The linear positioning of the table with a 150mm stroke is driven by a brushless DC Linear motor and the other attitudes of the stage are controlled by the analog PD controller with magnetic bearing actuators. Each magnetic bearing unit which consists of 3 electromagnets, 3 capacitance probes and 3 backup bearings affords controlled forces by detecting the air gap between the probes and guideways. An integral type capacitance probe amplifier is equipped on the upper plate of the table so that the probe line to the probe amplifier can be shorter therefore the problems due to the stray capacitance and noise can be reduced. Form the pitch-yaw errormeasured by the autocollimator, the vertical and horizont straightness errors of the table are derived that they are maintained below 1.mu. m over 100mm stroke. The positioning accuracy of the linear motion is maintained below 2 .mu. m and the repeatability error is below 1 .mu. m

• Journal of Yeungnam Medical Science
• /
• 제6권2호
• /
• pp.217-222
• /
• 1989

In this study, high frequency oscillatory ventilator was designed and constructed. Using designed by phase-lock loop system, in order to accurately and easily treat both the outlet volume and rpm. A system has been designed and is being evaluated using CD4046A PLL IC. We use this PLL IC for the purpose of motor controls. The device consists of PLL system, pumping mechanism, piston, cylinder, and special crank shaft are required. This system characteristics were as follows : 1) Frequency : 20-1800rpm. 2) Outlet air volume : 1-50cc.

• 한국안전학회지
• /
• 제25권1호
• /
• pp.32-37
• /
• 2010

When back-out & firing Process applies heat, hume is piled up in exhaust duct by organic compound and it have high dangerousness. There by, the process is happening a lot of damage that is exhaust duct fire. However we do not have certain fire dangerousness estimation and digestion countermeasure. So we need preventive measure. Back-out & firing is a process which has fine structure, electrical and mechanical characteristics, such as firing kiln and back-out kiln which has pipe line and box type. The box oven is made of heating coil, fan motor and control panel. Back-out & firing process has air circulation institution of quick ventilation type. When we operate this process for long time, fire can break out easily. Duct is made by zinc shredder. If fire breaks out in duct inside, fire by deposit fume can be dispersed easily. Accordinglym, This project estimate danger for back-out & firing process exhaust duct through real fire test. And there is purpose of study to establish preventive measure.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2009년도 춘계 종합학술대회 논문집
• /
• pp.191-196
• /
• 2009

컴퓨터와 더불어 멀티미디어의 발전은 가상현실이라는 신기술을 만들어 내게 하였고 가상현실 분야중 컴퓨터 시뮬레이션 기술은 항공, 자동차, 의학, 소포츠, 교육, 패션 분야에 이르기 까지 그 적용이 확대되고 있다. 본 연구는 헤어스타일링 분야에서 컴퓨터 시뮬레이션 적용을 연구하고자 한다. 기존의 2차원 헤어시뮬레이션의 개발 및 상용 현황과, 연구 단계에 있는 3차원 헤어스타일 시뮬레이션의 개발 현황을 살펴본다. 아울러 2차원 헤어시뮬레이션의 사용자를 대상으로 그 유용성에 대하여 실증조사 하였다. 조사 대상자들의 64.6%가 헤어시뮬레이션에 대하여 만족한다고 응답하였고, 50.6%가 다른 사람들에게 추천할 의사가 있다고 하였다. 또한 63.3%가 구전의사가 있다고 조사되었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.992-996
• /
• 2004

Small electric motors in an automobile perform various tasks such as engine cooling, pumping, and in heating, ventilating, and air-conditioning (HVAC) system. At present, most of dc motors are supplied by 12V or 24V batteries. However, DC motors surfer from lack of efficiency, low life cycles and unreliability. Therefore, there is a growing interest in substituting DC motors for advanced AC motors including switched reluctance motors. Although there are several other forms SRM converters, they are either unsatisfactory to the control performance or unsuitable for the 12V-battery powered 3-phase SRM drives. Taking into account the requirement for effective operation and simplicity structure of converter in the limited internal environment of automobiles, the author inclines toward selecting the modified C-dump converter as well as the energy efficient C-dump converter. This is so that more economical and efficient converter topology in automobile industries can be utilized. This paper describes the foundation for the design and development of a 12V-250W-3000rpm SRM drives for automobiles. Furthermore, complete circuit, computer simulation and experiment results are presented to verify the performance of the C-dump converters.

• 한국기계가공학회지
• /
• 제14권1호
• /
• pp.63-69
• /
• 2015

Recently, research and interests in pilotless and radio-controlled quadcopters have increased due to military, hobby, and air-photo applications. However, quadcopters are fragile and can very easily to break when they crash. Therefore, it is necessary to create a protective device such that these devices can protect the main board, motor, and propellers from outside impacts. In this paper, a protective device for a quadcopter is designed in the form of a circle to disperse shock. Also, a dropping and impact simulation was performed to verify that the quadcopter can be efficiently protected when using the proposed device, created with the commercial finite element software Solidworks.

• 한국수소및신에너지학회논문집
• /
• 제17권3호
• /
• pp.255-262
• /
• 2006

To develop a hydrogen fueled engine with external mixture which uses in high reliability, low cost and low pressure, the single cylinder research engine with MCVVT(Mechanical Continuous Variable Valve Timing) system is developed and its basic characteristics analyzed. The MCVVT developed has high reliability and the valve timing change is possible in wide range continuously. Though the mechanical loss due to MCVVT system is increased a little, back-fire suppression research for valve overlap period is no difficulty. It's also confirmed that the hydrogen-fueled engine has lower torque and is possible high lean burn. As fuel-air equivalence ratio is high, as thermal efficiency is remarkable increasing.

• 한국정밀공학회지
• /
• 제27권3호
• /
• pp.50-57
• /
• 2010

A high precision air bearing stage has been developed and calibrated. This linear-motor driven stage was designed to transport a glass or wafer with the X and Y following errors in nanometer regime. To achieve this level of precision, bar type mirrors were adopted for real time ${\Delta}X$ and ${\Delta}Y$ laser measurement and feedback control. With the laser wavelength variation and instability being kept minimized through strict environment control, the orthogonality of this type of control system becomes purely dependent upon the surface flatness, distortion, and assembly of the bar mirrors. Compensations for the bar mirror distortions and assembly have been performed using the self-calibration method. As a result, the orthogonality error of the stage was successfully decreased from $0.04^{\circ}$ to 2.48 arcsec.