• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.137-137
• /
• 2001

서울시는 인구과밀, 크고 낮은 많은 산들, 높은 차량증가율과 수도권의 공업과 인구집중화 등의 이유로 그간의 많은 노력과 행정력의 집중에도 불구하고 질소산화물과 오존농도는 오히려 증가패턴을 나타내고 있다. 2002년도는 세계적인 월드컵대회가 한일공동으로 개최될 예정이고, 개회식이 개최될 서울 마포구 상암동 일대는 월드컵경기장 공사와 주변정리 작업이 한창이다. 직선거리로 400-500m의 풍상측(주풍방향 서북풍)에는 세계에서 가장 큰 규모의 하나인 비위생적 쓰레기 매립지가 위치하고 있고 이는 15년간 9천2백만㎥의 쓰레기가 묻혔으며 매립이 중단된지 9년이 되었다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.10a
• /
• pp.124-125
• /
• 1999

대기중에 부유하는 미세입자는 인체에 유해한 영향을 미칠 수 있어, 입자 포집 방법에 대한 관심이 높아지고 있다. 부유 에어로졸 입자중 $10\mu\textrm{m}$ 크기 이하의 미세입자는 인체의 흉관 부위까지 도달할 수 있다. 특히 약 $2.5\mu\textrm{m}$ 크기 이하의 입자는 폐포관에 침착할 가능성이 매우 커서, 입자의 화학조성, 침착 부위에 따라서 인체에 유해 정도가 달라질 수 있다. 최근에 미국 EPA에서는 부유분진 입자의 규제를 $2.5\mu\textrm{m}$ 이하입자의 질량 농도에 두고 있다.(중략)

• Journal of Acupuncture Research
• /
• v.27 no.1
• /
• pp.1-10
• /
• 2010

Objectives : The mechanical properties of Korean electric cupping systems are studied via experimental measurements. The study aimed at establishing the fundamentals of industrialization and systemization of oriental medicine device industry, as well as improving the quality of life for many Koreans. Methods : We reviewed the studies on traditional cupping as well as modern one to fine necessary factors for electric cupping systems. To characterize the mechanical properties of Korean electric cupping systems, we measured the pressure characteristics of commercially available electric cupping system by using an automatic pressure acquisition system and a standard cup. The pumping capability was checked at 40 seconds, and the stability of the suction cup was checked at 600 seconds. We also acquired the noise level of each system in clinical setting. To check the portability of each system, we also measured its physical dimensions. We scrutinized system manuals provided by the system manufacturers. Results : It took less than 5 second to reach the pressure if the connection between the air hose and the vacuum valve of the cupping system was secure. Pressure diminished to no more than 10% for 600s for all systems. Noise levels were 55~70 dB. Increase in pressure was too fast to control for a designated vacuum level except for one product. Conclusions : The Pumping ability of the systems is impressive and reliable. Pressure retention ability of each cup is quite reliable and reproducible. Therefore, their mechanical performances were worthy of recommendation. Some of them had noise level higher than 60 dB and they were bothersome. It was also suggested that the control for low to middle pressure needed to be accomplished by the cupping system.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.2
• /
• pp.243-257
• /
• 2005

The effects of Traffic Control Program (TCP) on the ambient urban air quality of SO$_{2}$, NO$_{2}$, O$_{3}$, and PM$_{10}$ were evaluated in Seoul metropolitan area by using the lower atmospheric vertical stability index and daily mean wind speeds. The vertical stability index; temperature lapse rate between 1000 hPa and 850 hPa geopotential height fields, were used to identify daily vertical stability index during the 2002 World Cup period where traffic amount was reportedly reduced to half the number of vehicles. The indicated air quality levels of TCP days were then compared with those of the cases observed with analogous vertical stability during the recent 3 years from 2000 to 2002. The result indicates that the effect of TCP on the primary air pollutants are found to be approximately 39$\%$, 23$\%$ and 20$\%$ lower for SO$_{2}$, NO$_{2}$ and PM$_{10}$, respectively. The secondary air pollutant; ozone, showed relatively smaller decreasing rate (13$\%$) of daily mean concentrations (even increased during the night time). The comparison of daily maximum or peak concentrations reveals that the pronounced decreasing effects of TCP on the ambient air quality for both primary and secondary air pollutants, suggesting that TCP is one of the effective strategies to control peak or higher concentrations for most urban scale air pollutants in and around the Seoul metropolitan area.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.E2
• /
• pp.49-56
• /
• 2006

This pilot study focuses on emissions characterization of air pollutants produced from incineration of some municipal solid wastes (MSWs). The MSWs incinerated by an electric furnace maintained up to $600^{\circ}C$ included food, paper, and plastic wastes. The pollutants analyzed in this study included concentrations of volatile organic compounds (VOCs), bottom ash contents, and heavy metals extracted from the bottom ash of each waste. The VOCs identified were classified based on their chemical structure. The total emissions of VOCs produced from incineration of the papers were identified as the highest followed by those from the plastics and the food wastes. Aliphatic alkenes were major VOC compounds produced from incineration of plastic or food wastes, while furans were major VOCs produced from incineration of papers. The second major VOCs produced from incineration of food, plastics, and papers were aromatics. In particular, hazardous air pollutants such as benzene were produced with considerable amount of emission concentration. The bottom ash contents of papers were usually much higher than those of food or plastic wastes. The bottom ash contents produced from incineration of food and plastics were much lower than those of other MSWs. In analysis of heavy metals extracted by an ultrasonic method from the bottom ashes of the papers, high concentrations of heavy metals were identified from incineration of newspapers and box (cardboard). In addition, it was identified that the general public might be exposed to considerable amounts of lead concentrations during incineration processes and uses of paper cup and from ashes.

• Korean Journal of Materials Research
• /
• v.3 no.6
• /
• pp.575-584
• /
• 1993

The effects of atmosphere on the creep rupture properties of Ni-base superalloy Ren6 80 were investigated. Creep rupture tests were performed at $760^{\circ}C$, 657MPa and 982%, 157MPa under Ar gas atmospheres. Creep rupture mode and rupture properties (rupture life and elongation) were similar in two different atmospheres under the condition of $760^{\circ}C$, 657MPa. However, the results at $982^{\circ}C$, 157MPa showed different creep rupture mode and life between air and Ar gas atmospheres. In air, it was shown that creep cracks were initiated at surface-exposed grain boundaries and propagated along grain boundaries. In Ar gas atmosphere, the cracks were initiated at inner grain boundaries and coalesced to surface cracks which cause cup-and-cone type fracture. Due to protective oxide layer formation, air test showed longer rupture life than Ar test.

• Journal of Environmental Policy
• /
• v.2 no.1
• /
• pp.1-29
• /
• 2003

This paper examines the dynamics of environmental policy development in Korea by reviewing some of the ways on how the policy windows have been opened. There are a lot of theoretical arguments about the major factors influencing policy development or changes. Many scholars have believed that severe pollution accidents or salient environmental episodes might have been the main motivation of environmental policy development. This line of argument seems valid, especially with the water pollution control policy in Korea. Water pollution control programs had rapidly expanded along with the series of water pollution accidents in the tap water sources from the late 1980s to mid-1990s. However, regarding other major env. issues, various other factors have played more important roles in the development of the relevant policies. In case of air pollution control policy international sport events such as, 1986 Asian Games, 1988 Summer Olympics, and 2002 World Cup Competition, have contributed for the development. The municipal solid waste management policy partly owed its development to the introduction of local autonomy system in the mid-1990s. Even the foreign currency crisis occurring in December 1997 helped the policy paradigm shift from rigid supply-oriented to soft demand-oriented approaches. After closely looking at the dynamics of environmental policy development in Korea, this paper tries to identify the logical background of the observed outcomes.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.93-97
• /
• 2018

In this paper, it proposes a method that uses an air pump to inject oxygen to water directly to prevent the growth of algae and cyanobacterium using MCU(Micro Controller Unit). MCU can control itself with modules of GPS, a sonic sensor, camera, conveyer belt and water pump to remove and prevent growths of algae. It can also be connected to the smart phone application software to track the system where it is and it can be controlled by the user interfaced with the smart phone application.

• Journal of the Korean Society of Safety
• /
• v.17 no.4
• /
• pp.25-30
• /
• 2002

This paper demonstrates the effects of dust electrical resistivity on electrostatic precipitability. The effects of gas temperature, velocity and humidity on the collection efficency were considered by used of coal fly ashes from fluidized bed combustion boiler. The experiments for collection efficiency were carried out in the pilot plant. The ashes which have non-spherical geometry and high electrical resistivity were used. Electrical resistivity is an important property for the collection efficiency in the electrostatic precipitators. Fly ash resistivity as a function of temperature up $350{\circ}C$ and water concentration(up to 15%) has been experimentally investigated using the resistivity test equipment consisted of the movable electrode, dust cup, and furnace. As the resistivity of fly ash in the operating temperature($150{\circ}C$) of an electrostatic precipitator was measured higher than $1010{\Omega}{\cdot}$cm, flue gas conditioning in the electrostatic precipitator to reduce the resistivity of fly ash is required.

• Journal of Sensor Science and Technology
• /
• v.22 no.4
• /
• pp.292-296
• /
• 2013

The ultrasonic wind sensor that pass through the air, beating the delivery of ultrasonic wind speed increases or decreases by the physical characteristics of the wind speed and the direction of the sensor, the transmission and reception of ultrasonic time difference measured by a two-axis vector wind and wind speed measured by calculating a device that converts the digital signal is Anemometer and wind direction meteorological facilities management, management of the ship sail used for various purposes, including, but used the existing 3-cup (mechanical) anemometer wind rotor caused by mechanical wear parts replacement due to the short-term, the reliability of the product is low, parts replacement, and according to the characteristics caused the car, there is a problem in high maintenance costs. In addition, because the bearings use of the marine environment and the cryogenic environment was constrained. In this study, the excellent long-term reliability, using ultrasonic-type environment that is not constrained to produce wind anemometer located $90^{\circ}$ conformal road using four piezoelectric sensors were fabricated structures, the piezoelectric oscillator circuit produces a rash and receiving transmit and receive speeds the car through the two-axis vector calculation to measure wind velocity processor firmware programming, and its characteristics were tested.