• Journal of The Korean Society of Agricultural Engineers
• /
• v.63 no.1
• /
• pp.75-87
• /
• 2021

Air quality related to particulate matters and ammonia is being come to the fore as the national concern in Korea. CAPSS (Clean Air Policy Support System) provides emission coefficients of these kinds of particulate and gaseous matters in the fields of livestock; however reliability issues are consistently mentioned. Evaluation of emission rates of PM2.5 and NH3 of the country is very important, but only few studies are available as the background related to observation of the concentration of the particulate matter and ammonia, especially within livestock house in Korea. In this paper, long-term measurement of PM10, PM2.5, and ammonia within the mechanically ventilated broiler house were carried out to introduce backgrounds of generation and emission of the particulate matters and ammonia. Measurement results were analyzed according to seasonal changes, age of broilers(weeks) and measurement locations. Concentration of inhalable and respirable dust were also evaluated in terms of occupational respiratory health according to increase in broiler's activity. From the results of this study, identification of the generation mechanisms of the particulate and gaseous matters, and evaluation of the emission rate of these in the broiler house will be carried out.

• Journal of Korea Foundry Society
• /
• v.7 no.4
• /
• pp.366-379
• /
• 1987

The influences of some factors on the variation of compression strength of $CO_2$ process were investigated with an attention given to use of high $SiO_2\;/Na_2O$ silicate, addition of organics and gassing operation. 1) Higher ratio binder offers faster rates of hardening with lower $CO_2$ consumption requiring more concentration for a good strength development. A mixture containing 4 percent of 2.7:1 ratio silicate produces the strength above $8kg\;/\;cm^2$ after 80 seconds gassing, but 5% and 6% respectively of 3.0:1 and3.3:1 ratio silicate are necessary to achieve equivalent levels of strength. 2) The correct water content in sand mixtures containing higher ratio silicates is necessary for the better strength properties to be obtained. The addition of 1% water to the sand mixtures bonded with 5%,3:1 ratio and 6%,3.3:1 ratio silicates maintains near-maximum strength on extended gassing. 3) When higher ratio silicates with 3:1 and 3.3:1 ratios are used,the addition of organic additives such as oil, sucrose and polyol results in considerable changes in strength. The presence of 1.0 to 1.5 percent of polyol produces a noticiable improvement 4) Gas diluted with air raises the efficiency of gas utilization. When gas contains 50 percent $CO_2$, the efficience is significantly increased with the best strength in the silicates having high ratios of 3:1 and 3.3:1. 5) The strength of molds is liable to change on storage with the reduction in water content. The magnitude of the strength change is determinded with the mole ratio. The presence of polyol in the mixture with 3.3:1 ratio silicate has a pronounced effect on maintaining the gassed strength.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.837-843
• /
• 1997

In oxidized polyethylene wax preparation, the effects of main parameters such as the property of used wax, oxidation time, oxidation temperature, air feed rates on the change of acid-numbers were investigated. The change in polymer property was also investigated. The results showed under given reaction conditions, the acid numbers with oxidation temperature increased upto $160^{\circ}C$, but at higher temperature, it decreased. The base resin which was lower molecular weight had higher acid number. The result showed molecular weight as a experimental parameter was more effective than density in oxidation experiment. In milder condition, free radical initiator was used for catalyst to get higher acid-numbers, which was successful in comparison to the non-catalyst system. Also the catalyst with longer half-life was efficient, in order of DCPO, HOPO and BPO.

• Journal of Power System Engineering
• /
• v.10 no.3
• /
• pp.5-10
• /
• 2006

In a conventional and lean operating engine, the state of mixture is very important in the combustion and emission characteristics. Lean operation is known to decrease the formation while maintaining a good fuel economy, but the unstable operation due to misfire and erratic combustion prevents engines from being operated at very lean mixtures, so both combustion rates and exhaust emission formation need to be satisfied comparably. In this study, it is designed and experimented the modified engine, and analyzed the combustion and exhaust emission according to the change of engine speed and with adding ozone. The conclusions were drawn out and enumerated as follows. 1. At the experimental result of automobile diesel engine, it has been verified that the formation of particulate matter(PM) gas is able to be lower with the addition of optimum quantities of ozone. 2. Carbon monoxide(CO) was formed by the lack of oxygen and the thermal dissociation in the combustion process. Therefore, with the change of swirl valve's position and addition of oxygen and ozone, CO formation was decreased by the increasing of excessive O2, but it was increased by the temperature of combustion gas growing higher. As a result of the two effects, CO formation was decreased in this study. 3. Hydrocarbon(HC) was formed by the lack of O2, and the flow of mixture in cylinder. According to opening of the swirl valve and adding the oxygen and ozone, hydrocarbon gas was decreased by 20%, 9%, and 27.5%, respectively. 4. Nitric oxides($NO_x$) was strongly affected by the combustion gas temperature. As a result of respectively experimental conditions, $NO_x$ formation was increased about 20% due to (be the) high(er) combustion gas temperature.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.8
• /
• pp.1398-1408
• /
• 2003

Tensile and LCF(low cycle fatigue) tests were carried out in air at wide temperature range 20$^{\circ}C$-750$^{\circ}C$ and strain rates of 1${\times}$10$\^$-4//s-1${\times}$10$\^$-2/ to ascertain the influence of strain rate on tensile and LCF properties of prior cold worked 316L stainless steel, especially focused on the DSA(dynamic strain aging) regime. Dynamic strain aging induced the change of tensile properties such as strength and ductility in the temperature region 250$^{\circ}C$-600$^{\circ}C$ and this temperature region well coincided with the negative strain rate sensitivity regime. Cyclic stress response at all test conditions was characterized by the initial hardening during a few cycles, followed by gradual softening until final failure. Temperature and strain rate dependence on cyclic softening behavior appears to result from the change of the cyclic plastic deformation mechanism and DSA effect. The DSA regimes between tensile and LCF loading conditions in terms of the negative strain rate sensitivity were well consistent with each other. The drastic reduction in fatigue resistance at elevated temperature was observed, and it was attributed to the effects of oxidation, creep and dynamic strain aging or interactions among them. Especially, in the DSA regime, dynamic strain aging accelerated the reduction of fatigue resistance by enhancing crack initiation and propagation.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.6
• /
• pp.175-181
• /
• 2009

In this research, experiments were conducted to find out whether polycarboxylate could be used as a crude steel admixture for practical work, depending on the change in the replacement level of the compound mixed into polycarboxylate. Its fluidity was satisfactory, its airspace was a bit smaller than the KS standard, and its unit volume weight was proven to meet the standard. The amount of bleeding was smallest in B2, and in terms of the solidification time, the first and the last solidification was faster in A1, B1, and C1. With regard to the compressive strength in early days as acharacteristic of hardened concrete, all addition rates of 7-day C2 displayed the highest strength value, among which the addition rate of 1.3% had the biggest strength performance tendency. The seal strength also showed the strength performance rate which was about one tenth as big as that of the compressive strength. The length change rate resulting from dryness and contraction was proven to be good, and once the appropriate AE air entraining agent is used, it is evaluated to be a very useful and practical compound out in the field.

• Journal of Climate Change Research
• /
• v.4 no.3
• /
• pp.245-254
• /
• 2013

Korea government promote renewable energy as the core of their energy matrix to break the dependence and reduce greenhouse effects. This study analyzes the economic assessment of Solid Refuse Fuel project in urban area, considering the marginal external costs of air pollution in this area. Assessment index defined as costs (i.e., construction cost, operation cost) and benefit (margin, external cost) data which is located in Sudokwon landfill site. The result indicates that cost-benefit analysis of SRF is calculated as 1.0. In addition, SRF project is very sensitive about electric power selling price, operating cost and labor cost according to inflation rates. This study shows that the sustainability of SRF project is required the government financial support like investment funds as well as policy support. Variability analysis of SRF economic assessment due to renewable energy can be used for making policies in various fields such as waste and public energy field.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.4
• /
• pp.340-345
• /
• 2003

In order to choose the manufacturing method for extracting alginates from sea tangle, Laminaria japonica, three methods were applied. In Method I, alginates were extracted with NaOH solution from sea tangle powder and extracted alginates were precipitated and converted to alginic acid by $CaCl_2$ and HCI solution. Then alginic acid was converted to sodium alginates with $Na_2CO_3$ solution. Sodium alginates were precipitated with methyl alcohol and were resolved with hot water and this step was repeated three times. Method II was same to Method I except final step including that sodium alginates were precipitated and washed with methyl alcohol three times. Method III included that sodium alginates were extracted with $Na_2CO_3$ solution from sea tangle powder then sodium alginates were precipitated and washed with methyl alcohol three time. Extracting time increased with Increasing extracted alginates amounts but increasing rates were below $0.4\%/h.$ Alginates amounts recovered by Method III showed above 2 times more to those by Method I and II. Extracting time increased with increasing ash amount of sodium alginates but increasing rates were below $0.1\%/h.$ and that of sodium alginates extracted by Method III showed higher value $(5\%)$ than those by Method I and II. In the sodium alginates prepared by Method III, the amount of ash in alginates dried by air was $34.4\%,$ that by vacuum freeze drying was $47.8\%.$ Extracting time increased with decreasing average molecular weight (MW) and degree of polymerization (DP) of sodium alginates, MW and DP of alginates prepared by Method III were higher than those by Method I and II In same extracting time. Extracting time increased with decreasing rate of apparent viscosity change (SAV) of alginates solution, and SAV of alginates prepared by Method III showed higher value than those by Method I and II in same extracting time. SAV of alginates dried by air was higher than that by vacuum freeze drying. Relating equation among SAV MW and DP were MW = 60.066 (SAV) -93.950, DP =309.760 (SAV) -485.084 and MW = 0.914 (DP)+0.213.

• Journal of Environmental Health Sciences
• /
• v.45 no.1
• /
• pp.1-8
• /
• 2019

Objectives: The purpose of this study was to estimate the ventilation rate of residential homes in Korea through tracer gas methods using indoor and outdoor concentrations of carbon dioxide ($CO_2$) and $CO_2$ generation rates from breathing. Methods: In this study, we calculated the number of occupants in a home by time through data on the average number of people per household from the Korean National Statistical Office and also measured the amount of $CO_2$ generation by breathing to estimate the indoor $CO_2$ generation rate. To estimate the ventilation rate, several factors such as the $CO_2$ generation rate and average volume of residential house provided by the Korean National Statistical Office, indoor $CO_2$ concentrations measured by sensors, and outdoor $CO_2$ concentrations provided by the Korea Meteorological Administration, were applied to a mass balance model for residential indoor environments. Results: The average number of people were 2.53 per household and Koreans spend 61.0% of their day at home. The $CO_2$ generation rate from breathing was $13.9{\pm}5.3L/h$ during sleep and $15.1{\pm}5.7L/h$ in a sedentary state. Indoor and outdoor $CO_2$ concentrations were 849 ppm and 407 ppm, respectively. The ventilation rate in Korean residential houses calculated by the mass balance model were $42.1m^3/h$ and 0.71 air change per hour. Conclusions: The estimated ventilation rate tended to increase with an increase in the number of occupants. Since sensor devices were used to collect data, sustainable data could be collected to estimate the ventilation rate of Korean residential homes, which enables further studies such as on changes in the ventilation rate by season resulting from the activities of occupants. The results of this study could be used as a basis for exposure and risk assessment modeling.

• KSBB Journal
• /
• v.14 no.5
• /
• pp.621-627
• /
• 1999

A food waste composting apparatus of 450 L was designed for and tested with changing conditions of inlet air flow rate, agitation and inoculation. Agitation was done twice per day for 5 min and inlet air flow rate was set as 22.7 L/min for RUN 1. For RUN 2 and RUN 3, agitation was continuous, and inlet air flow rate was changed frequently as 10 L/min, 15 L/min and 20 L/min in order to maintain temp. above 5$0^{\circ}C$, and the concentration of $O_2$over 7 mol%. The compost of RUN3 was inoculated with 10 wt% of accomplished compost, and it was compared with RUN 1 and 2 to show the effect of inoculation. The composting rates of RUN 2 and RUN 3 were faster than that of RUN 1, because agitation was continuous and temperature was controlled in RUN 2 and RUN 3. Inoculated RUN 3 was better than RUN 1 and RUN 2 in the concentrations of $CO_2$and reduction of volatile solids. while the effect of inoculation on C/N ratios, pH change and the numbers of microoragnisms was not clearly appeared.