• Architectural research
• /
• 제8권1호
• /
• pp.37-45
• /
• 2006

A fungal spore transportation model that accounts for the concentration of airborne indoor spores and the amount of spores deposited on interior surfaces has been developed by extending the current aerosol model. This model is intended to be used for a building with a mechanical ventilation system, and considers HVAC filter efficiency and ventilation rate. The model also includes a surface-cleaning efficiency and frequency that removes a portion of spores deposited on surfaces. The developed model predicts indoor fungal spore concentration and provides an indoor/outdoor ratio that may increase or decrease mold growth risks in real, in-use building cases. To get a more useful outcome from the model simulation, an uncertainty analysis has been conducted in a real building case. By including uncertainties associated with the parameters in the spore transportation model, the simulation results provide probable ranges of indoor concentration and indoor/outdoor ratio. This paper describes the uncertainty quantification of each parameter that is specific to fungal spores, and uncertainty propagation using an appropriate statistical technique. The outcome of the uncertainty analysis showed an agreement with the results from the field measurement with air sampling in a real building.

• 한국항공운항학회지
• /
• 제7권1호
• /
• pp.57-64
• /
• 1999

The air transportation industry in Korea has grown very fast in aspect of the transportation scale as much as entering within the tenth in the world. However, as compared with the air transportation industry, the civil aviation pilots training has been performed at very low level in quantity and quality because of the high cost of pilots training, nation security, limited airspace use and falling behind of the science technology in relation to the aviation industry. In result, the number of airline pilots became lower than actual demands of both airlines, KAL and ASIANA. This produced many foreign captains employed, airline pilots overloaded and finally affected flight safety. In this paper, it was studied the actual reality and problems of civil aviation pilots training and presented the encouraging policies for civil aviation pilots training in Korea.

• 설비공학논문집
• /
• 제10권3호
• /
• pp.334-342
• /
• 1998

In this experimental study, methanol was chosen as a system material for a long -distance heat transportation. Not only transition metals but also noble metals were investigated as an active component, and several metal oxides, such as ${\gamma}$-$Al_2$,$O_3$, $SiO_2$, etc. as a support. In general, transition metal catalysts absorbed more heat than noble metal catalysts. The amount of heat absorption and CO selectivity depends on temperature and methanol partial pressure, and 25$0^{\circ}C$ Ni/$SiO_2$ catalyst showed the best result for methanol decomposition reaction.

• 대한교통학회지
• /
• 제18권1호
• /
• pp.27-34
• /
• 2000

이 연구는 최근 소비자 행동분석에서 많이 사용되고 있는 설문조사에 의한 Stated Preference의 방법론을 채택하여 항공여객수요의 가격탄력성을 분석하였다. 우리나라의 국내선 항공은 항공요금이 지금가지 인가제나 신고제로 규제되어 왔기 때문에 통상의 총량자료에 의한 회귀분석으로는 가격탄력성 도출이 어려우며 특별한 분석방법론을 필요로 한다. 이 연구에서는 항공여객에 대한 설문조사로 항공편과 철도, 버스, 승용차 등 대체교통수단과의 선택 여부에 대한 자료를 입수한 후, SP기법에 따른 Logit model로 분석하여 항공수요의 가격탄력성과 대체교통수단으로의 모드별 쉐어 변환율을 Sample Enumeration 방식에 의해 추정하였다 대체 가격탄력성은 -0.6∼-0.9의 값으로 밝혀졌으며 대체교통수단으로는 주로 철도를 선택하고 일부 버스를 선택하며 승용차는 거의 선택하지 않는 것으로 조사되었다.

• 대한기계학회논문집B
• /
• 제31권7호
• /
• pp.581-587
• /
• 2007

At present time, LNG demand of the world is increasing and the piping line for NG transportation has been already installed in Korea. The air fm vaporizer is, however, required because of the transportation for remotely local areas. This paper numerically investigates on the heat transfer characteristics of relevant geometric variations of air-fin vaporizer which is heated by air not by sea water. This vaporizer must be designed in consideration of both efficiency and economics because air is relatively a little heat source. In this study, the pipe and the longitudinal fins are fundamental geometric considerations. Main parameters of geometry are the number, the thickness, and the length of the fins. Finally, the results of heat transfer effects are investigated with the characteristics of each parameter variation.

• 전자통신동향분석
• /
• 제36권4호
• /
• pp.48-60
• /
• 2021

Following the global air-traffic market growth outlook, urgency of technical development is needed in responding to changes in the international air-traffic management paradigm and to prepare technology securing and spreading strategies, which are consistent with systematic aviation weather service policies and evolution direction. Although air traffic has decreased significantly due to COVID-19, normalcy is expected from 2024, as announced by IATA. According to the future air transportation market outlook and development trends of related technologies, Korea has established and implementing the next-generation air transportation system construction plan(NARAE) to secure international competitiveness and leadership in the future. Therefore, this paper describes the technical, economic background and requirements of numerical model-based aviation weather R&D projects for successful implementation of domestic NARAE plans and providing aviation safety and air traffic service efficiency. Furthermore, we proposed numerical-model-based technology development content, strategies and detailed load-map.

• 산업경영시스템학회지
• /
• 제46권4호
• /
• pp.160-172
• /
• 2023

In contemporary global warfare, the significance and imperative of air transportation have been steadily growing. The Republic of Korea Air Force currently operates only light and medium-sized military cargo planes, but does not have a heavy one. The current air transportation capability is limited to meet various present and future air transport needs due to lack of performance such as payload, range, cruise speed and altitude. The problem of population cliffs and lack of airplane parking space must also be addressed. These problems can be solved through the introduction of heavy cargo planes. Until now, most studies on the need of heavy cargo plane and increasing air transport capability have focused on the necessity. Some of them suggested specific quantity and model but have not provided scientific evidence. In this study, the appropriate ratio of heavy cargo plane suitable for the Korea's national power was calculated using principal component analysis and cluster analysis. In addition, an optimization model was established to maximize air transport capability considering realistic constraints. Finally we analyze the results of optimization model and compare two alternatives for force structure.

• 무역상무연구
• /
• 제78권
• /
• pp.1-29
• /
• 2018

This article demonstrates that both the Warsaw Convention Systemand the Montreal Convention are not designed for multimodal transport, let alone for "Door to Door" transport. The polemic directed against the "Door to Door" application of the Warsaw Convention systemand the Montreal Convention is predominantly driven by the text and the drafting philosophy of the said Contentions that since 1929 support unimodalism-with the rule that "the period of the carriage by air does not expend to any carriage by land, by sea or by inland waterway performed outside an airport" playing a profound role in restricting their multimodal aspirations. The drafters of the Montreal Convention were more adventurous than their predecessors with respect to the boundaries of the Montreal Convention. They amended Art. 18(3) by removing the phrase "whether in an aerodrome or on board an aircraft, or, in the case of landing outside an aerodrome, in any place whatsoever", however, they retained the first sentence of Art. 18(4). The deletion of the airport limitation fromArt. 18(3) creates its own paradox. The carrier can be held liable under the Montreal Convention for the loss or damage to cargo while it is in its charge in a warehouse outside an airport. Yet, damage or loss of the same cargo that occurs during its surface transportation to the aforementioned warehouse and vice versa is not covered by the Montreal Convention fromthe moment the cargo crosses the airport's perimeter. Surely, this result could not have been the intention of its drafters: it certainly does not make any commercial sense. I think that a better solution to the paradox is to apply the "functional interpretation" of the term"airport". This would retain the integrity of the text of the Montreal Convention, make sense of the change in the wording of Art. 18(3), and nevertheless retain the Convention's unimodal philosophy. English courts so far remain loyal to the judgment of the Court of Appeal in Quantum, which constitutes bad news for the supporters of the multimodal scope of the Montreal Convention. According the US cases, any losses occurring during Door to Door transportation under an air waybill which involves a dominant air segment are subject to the international air law conventions. Any domestic rules that might be applicable to the road segment are blatantly overlooked. Undoubtedly, the approach of the US makes commercial. But this policy decision by arguing that the intention of the drafters of the Warsaw Convention was to cover Door to Door transportation is mistaken. Any expansion to multimodal transport would require an amendment to the Montreal Convention, Arts 18 and 38, one that is not in the plans for the foreseeable future. Yet there is no doubt that air carriers and freight forwarders will continue to push hard for such expansion, especially in the USA, where courts are more accommodating.

• 산업경영시스템학회지
• /
• 제32권1호
• /
• pp.44-51
• /
• 2009

A bonded warehouse is the warehouse located in bonded area. It functions not only as a general warehouse but also as a place for managing the work related to import and export bonded goods. As a general warehouse, it uses the rack system to store the goods and the folk lift truck to move the unitized goods. The operation of the storing system closely related to the efficiency of space uses in a warehouse and vehicle working. Thus, vehicle performance measured in distance units in the ware-house could be used as one of the key performance measure in warehouse system. This paper focuses on the operation efficiency of the bonded warehouse which uses rack system for the storing and the folk lift truck for moving goods. The method of load allocation for balancing the rack uses and vehicle operation for maximizing efficiency are the specific concerns in this paper. The simulation study is conducted to find a policy for efficient vehicle operation based on balanced rack utilization, and the favorable result for the system operation would lead the usable proposal in vehicle operation.

• 한국태양에너지학회 논문집
• /
• 제34권3호
• /
• pp.42-48
• /
• 2014

An experimental study was performed estimating COP(Coefficient of Performance) of air-conditioning cycle with inverter scroll compressor. All experiments were done for various compressor speeds from 1000~4000 rpm and used the inverter controller called CANDy to change the compressor rpm. The air-conditioning cycle components in the apparatus were used as same with components of YF hybrid car. To estimate the COP, this study measured the temperature and pressure at inlets and outlets of compressor, condenser, and evaporator. And also measured the compressor input power using Powermeter. Through the experiments, the maximum error to estimate COP was shown about ${\pm}6.09%$ at 3500rpm. This study revealed that the condenser temperature and pressure were increased and the evaporator temperature and pressure were decreased with the increased compressor speed. And also, the COP was decreased with increased compressor speed. Those results can be used the basic and fundamental data to design the air-conditioning cycle with inverter scroll compressor.