• 대한기계학회논문집B
• /
• 제39권9호
• /
• pp.727-734
• /
• 2015

세계적으로 유가 상승에 따른 내연기관의 에너지 변환 효율을 높이고자 하는 연구가 활발히 진행되고 있다. 가솔린엔진에서 높은 열효율을 실현하기 위해서는 희박연소에 의한 비열비의 증가 및 단열화염온도의 저감에 의한 열효율 향상이 필수적이다. 직접분사식 가솔린 엔진은 연료를 직접 연소실에 공급하고 정밀한 연소제어를 통해 희박 연소가 가능하게 하지만 희박연소 한계의 확대와 안정된 희박연소제어가 요구된다. 희박연소 엔진에 대한 삼원촉매의 배출가스 저감특성은 높은 공기과잉률 및 낮은 배기가스 온도로 인해 매우 제한적이다. 이에 효과적인 삼원촉매의 개발을 위해 승용 차량용 엔진의 주요 연비시험 운전조건인 2000 rpm BMEP 2bar 조건에서 공기과잉률의 변화에 따른 배출가스 반응 및 생성 특성을 비교하였다. 희박연소 조건에서 $NO_2$가 생성되었으며, $NO_2$의 비율은 공기과잉률이 증가할수록 증가하고 $N_2O$는 감소하였다.

• 동력기계공학회지
• /
• 제6권3호
• /
• pp.17-23
• /
• 2002

The purpose of this study is to investigate the combustion emission characteristics changing auxiliary air injection in combustion field of coaxial swirling diffusion combustor. For this purpose, mean temperature, CO, CO2, O2 and HC concentration were measured by changing excess air ratio and auxiliary air injection. As a result of this study, mean temperature, CO2 emission were increased and CO emission decreased by increasing auxiliary air. Therefore, this paper showed the auxiliary air injection effected strongly on flame structure and combustion emission characteristics.

• 한국자동차공학회논문집
• /
• 제14권2호
• /
• pp.114-120
• /
• 2006

The basic effects of hydrogen addition for engine performance and emission were investigated in single cylinder research engine. Seven commercial injectors were tested to choose a suitable injector for hydrogen injection prior to its engine implementation. The hydrogen fuel leakage and flow rate were evaluated for each injector and KN3-1(Keihin, CO.) showed the best performance for hydrogen fuel. At the higher excess air ratio(${\lambda}=1.7$, 2.0), the better combustion stability was found with hydrogen addition even though its effect was small at lower excess air ratio (${\lambda}=1.0$, 1.3). Stable operation of the engine was even guaranteed at ${\lambda}=2.0$, if the amount of hydrogen gas was near 15% of total energy. In the lean region, ${\lambda}>1.3$, thermal efficiency was improved slightly while it was not clearly observed at ${\lambda}=1.0$, 1.3. It is considered that, in some cases, high temperature environment due to hydrogen combustion caused further heat loss to surroundings. Except for ${\lambda}=1.0$, with larger amount of hydrogen addition, CO was reduced drastically but it was emitted more at the leaner region. Nitric oxides(NOx) was increased a little more with hydrogen addition at ${\lambda}=1.0$, 1.3. However, at ${\lambda}>1.3$ its relative amount of emission was low. In addition, the amount of NOx was continuously decreased with hydrogen addition, but, at ${\lambda}=2.0$ the amount of NOx was lowered to 1/100 of that of ${\lambda}=1.0$. THC emission was significantly increased as air/fuel ratio was raised to leaner region due to misfire and partial burn.

• 공업화학
• /
• 제8권3호
• /
• pp.517-523
• /
• 1997

본 연구는 유동층연소로에서 유,무연탄 혼합연소시 대기오염물질 발생과 연소효율에 관하여 실험하였으며, 실험결과는 다음과 같다. 유동층연소로 높이가 증가할수록 이산화황과 질소산화물의 농도는 증가하는 것으로 나타났으며, 무연탄 혼합비가 증가할수록 이산화황의 농도는 증가하였으나 질소산화물농도는 큰 변화가 없었다. 무연탄 혼합비가 증가할수록 비산유출율도 증가하였고 주입 가연성분에 대한 유출 가연성분비도 증가하였다. 또한, 무연탄 혼합비에 관계없이 비산유출입자의 평균입경에 따른 미연분 함량은 미세입자에서 대체로 높게 나타났다. 한편, 연소효율은 층온도 $850^{\circ}C$, 과잉공기 20% 이상에서 큰 차이를 보이지 않았으므로 유속 0.3m/s, 층온도 $850^{\circ}C$, 과잉공기비 20%의 조건으로 혼합연소시키는 것이 적절한 것으로 나타났다.

• 한국가스학회지
• /
• 제27권3호
• /
• pp.1-10
• /
• 2023

산업혁명의 발달로 인해 급격하게 증가된 온실가스 배출량을 저감하기 위해 배기 배출물 규제가 계속해서 강화되고 있다. 이를 만족시키기 위해선 친환경 연료의 사용은 필수적이다. 미래의 친환경 연료로서 수소가 주목받고 있지만, 물질적 특성으로 인해 취급과 보관에 큰 어려움을 겪고 있어, 이에 대안으로 암모니아가 제안되었다. 암모니아는 수소 대비 상온 조건에서 쉽게 액화가 가능하며, 에너지밀도가 높다. 이에 엔진의 연료로서 암모니아의 적용성을 검토하기 위해 직접분사식 암모니아 전소 엔진에서 연소제어인자의 변경에 따른 실험을 진행하였다. 본 실험은 점화시기(Spark Timing)와 공기과잉률(Excess Air Ratio) 두 개의 변수를 변경하여 실험을 진행하였다.엔진 속도 1,500 RPM 및 중부하 이상(제동 토크 200 Nm)의 조건에서 암모니아 전소를 하였을 때, 연소 안정성과 질소산화물, 미연 암모니아 등의 배기 배출물의 경향을 관찰하였다. 연소제어인자의 최적화를 통해 암모니아만을 연료로 사용한 경우에도 안정적인 연소가 가능한 조건을 찾을 수 있었고, 향후 운전영역 확장을 위한 전략을 적용할 계획이다.

• Journal of Biosystems Engineering
• /
• 제24권4호
• /
• pp.335-342
• /
• 1999

Air and flue gas temperature distributions in the space heater for greenhouse were measured to develop a thermal design technology for the space heater. Also, the characteristics of the fan supplying air to the space heater were investigated. The temperature of the flue gas inside the flue gas tube was linearly decreased as the lenght of than those of the flue gas with the oxygen concentration of 8.25% at the last exit of the second flue gas tube. Thus, the operating efficiency of the space heater could be increased with low air ratio decreased exhausting gas temperature and saved the energy consumption with decreased excess air flow. The temperature of the air supplied by fan was increased slowly around the first flue gas tube, meanwhile, increased sharply around the second flue gas tube due to large LMTD (Logarithmic Mean Temperature Difference) at the first flue gas tube than which of the second flue gas tube.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.77-84
• /
• 2002

For the purpose of obtaining a fundamental data which is needed to develope the port injection type charged LPLi engine system, we manufactured intake port injection system of liquid charging LPG and modified heavy duty single cylinder LPLi engine from heavy duty diesel engine. Engine output and emission characteristics were analyzed under variable air/fuel ratio and charging pressure. Since LPG is consisted of propane and butane, we investigated combustion characteristics using this two kinds of fuel. From the result of charging engine performance test, engine torque increase about 30% ∼ 40% with 0.3bar charging pressure. In low speed condition, as charging pressure increase, combustion stability improve ill lean bum condition, but, in high speed condition, combustion stability make worse in lean bum condition. We know that engine output decreased rapidly from the condition of air excess ratio 1.3. In addition, we measured emission characteristics under the lean bum and charging condition. From this experiment, we found that CO emission is out of the question in the range from stiochiometric to lean burn and charging condition, but charging pressure has influence on HC emission.

• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.29-36
• /
• 2003

A cylindrical constant volume combustion chamber was used to investigate the flow characteristics at spark plug and the combustion characteristics of inhomogeneous charge methane-air mixture under several parameters. The flow characteristics such as mean velocity and turbulence intensity was analyzed by hot wire anemometer. Combustion pressure development measured by piezoelectric pressure transducer was used to investigate the effect of initial charge pressure, excess air ratio and ignition times on combustion pressure and combustion duration. Mean velocity and turbulence intensity had the maximum value at 200 or 300ms and then decreased to beneath 0.05m/s gradually at 3 seconds. Second mixture is accompanied by an increase in the combustion rate, and that the higher the mass which is added in the second stage injection, the faster the burn rate.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.213-216
• /
• 2009

가스터빈 연소기의 화염 특성을 알기 위하여 분할 연소기 시험을 수행하였다. 점화시험은 여러 가지 연소기 유입 공기속도와 공기과잉율에 따라 토치 점화장치를 이용하여 수행되었다. 또한, 연료를 충분히 공급한 상태에서 점화를 수행한 후 점차 연료량을 감소시켜가며 희박연소한계를 측정 하였다. 실험 결과, 공기과잉율 6에서 안정한 점화를 보였고 이 값은 연소기 공기 유입속도에 따라 점점 증가함을 보였다. 최소 실화한계는 연소기 공기 유입속도 40 m/s에서 약 4였고, 이 값 또한 연소기공기유입속도에 따라 약 10 까지 증가함을 보였다.

• 동력기계공학회지
• /
• 제6권2호
• /
• pp.12-17
• /
• 2002

Recently, the world is faced with very serious problems related to the air pollution due to the exhaust emissions of the diesel engine. So, many of researchers have studied to reduce the exhaust emissions of diesel engine. This study was investigated for various exhaust emissions according to operating conditions in a turbocharged D.I. diesel engine. As a result of experiments in a test engine, the $CO_2\;and\;NO_x$ increased with increasing load, the $CO_2$ and CO decreased with increasing charge air pressure in manifold, the CO decreased with increasing cooling fresh water temperature, and the $NO_x$ decreased with worming cooling fresh water before engine start.