• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.527-530
• /
• 2010

전투기에 장착되는 정보수집용 포드의 냉각 장치인 ACM에 대한 성능 시험평가를 수행하였다. 시험평가 대상인 ACM은 역 브레이튼 공기 사이클로 작동되는 터보기기로서, 항공기의 비행속도에 의한 램 공기를 에너지원으로 사용하여 추가적인 에너지의 공급 없이 냉각 기체를 발생시킨다. 또한 습기에 민감한 전자장비의 냉각에 이용하기 위하여 열교환기를 함께 구성하였다. 성능시험을 통하여 개발 대상 ACM 및 열교환기는 요구 성능을 만족함을 확인하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1997년도 강연회 및 연구개발 발표회 논문집
• /
• pp.58-73
• /
• 1997

본 연구는 항공기용 환경제어계통의 시스템관련 제반 기술 및 그 핵심요소인 ACM(Air Cycle Machine)시제기의 개발을 통하여 국내의 여런 항공기개발 사업과 관련하여 급속히 요구되고 있는 항공기의 sub-system을 국산화할 수 있는 기술축적을 목적으로 수행되었다. 본 연구에서는 항공기용 환경제어장치(Environmental Control System : ECS)를 개발대상으로 하여 그 핵심부품인 Air Cycle Machine의 시제품을 순수 국내 기술로 설계/제작하였고, 자체 개발한 성능시험기를 이용하여 성능시험을 수행하였으며 또한 ACM 성능을 검증하기 위하여 기존제품의 자료와 비교하였다. 향후 이 시스템의 상품화를 위해서는 구동축의 무윤활 베어링에 대한 연구가 병행되어 주유동의 오일오염을 국소화시키는 시스템보완이 요구된다. 항공기용 환경제어장치(ECS)의 시스템해석부터 ACM의 공력/구조설계, 제작, 시험등 일련의 개발과정을 통하여 시스템에 대한 해석능력이 향상되었고, 그 핵심요소인 ACM의 순수 국산화개발이 가능하다는 판단을 내릴 수 있었다. 또한, ACM을 구성하고 있는 원심압축기와 반경류형 터빈의 제작 및 시험법은 유사 시스템 및 일반 터보기계류의 국산화개발에 유용하게 이용될 것으로 기대된다.

• 설비공학논문집
• /
• 제24권6호
• /
• pp.538-544
• /
• 2012

Analysis of thermal performance is required for the economic operation of turbine cycle of power plant. We developed corrective model of main feed water flow which is the most important parameter for the precise analysis of turbine cycle performance. Classification model for the identification of feed water flow measurement status was applied to increase the suitability of the corrective model. We used neural network and support vector machine to develop estimation model of main feed water flow with more generalization capability. The estimation model can be used practically to evaluate corrective performance of turbine cycle plant.

• 설비공학논문집
• /
• 제12권5호
• /
• pp.431-438
• /
• 2000

The major irreversibilities in absorption chillers are associated with the transfer of heat into and out from the machine and irreversible process inside the machine. By modeling only external irreversibilities(endo-reversible), a model was formulated to predict the ideal performance of a single-effect absorption chiller. Its actual performance including both external and internal irreversibilities was calculated with a in-house simulation program. The optimization of heat transfer area distribution was performed for both endo-reversible cycle and actual cycle. The equation of endo-reversible modeling was found to give about 2times higher cooling capacity than the simulation program. At optimal distribution, it was found that heat transfer area of the evaporator was about 30% of total area, that of the generator was 20%, and the rest 50% was for the absorber and condenser. The system COP for endo-reversible cycle was slightly higher than that for actual cycle. In the case of LiBr-water single-effect absorption chiller, the maximum cooling capacity was obtained near the condition that LMTD is same at all heat exchangers.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 1998년도 추계학술발표회 논문집
• /
• pp.249-254
• /
• 1998

This paper describes the study of developing air-cooled absorption system which uses a new working solution instead of LiBr solution to improve the performance of system. The absorption chiller-heater considered was an air-cooled, double-effect, $H_2O/LiBr+HO(CH_2)_3$ system of parallel flow type. In this study, we found out the characteristic of new working solution through the cycle simulation and compared the result that of LiBr solution to evaluate. The new working fluid has a wider working range with $8\%$ higher crystallization limit at the saturated refrigerant pressure of 0.8kPa. The optimum designs and operating conditions of air-cooled absorption system were suggested based on this cycle simulation analysis. It was demonstrated that new working fluid substantially improves the performance of the absorption refrigeration machine and is expected to increase the COP by as much as $5\%$.

• 한국의류학회지
• /
• 제41권6호
• /
• pp.1050-1059
• /
• 2017

Drying processes often cause knitted fabrics to shrink. This study obtains proper drying conditions for in the dryer use that can minimize knitted fabric shrinkage by investigating changes in shrinkage according to drying conditions. The experiment samples were all machine washable plain, mesh, and lacoste knitted fabrics made of 100% cotton. Samples were first washed in a washing machine on a normal cycle. They were then layered on a flat surface in an artificial climate chamber and dried for 24 hours at $20^{\circ}C$ and $40^{\circ}C$, respectively. Shrinkage was measured for 180 minutes at 30 minute intervals after washing. The comparison results of the shrinkage in the washing and drying process indicate that 80.0% and 23.0% shrinkage of plain knitted and lacoste knitted fabrics occurred during the washing process. As the samples dried, the shrinkage of the plain and lacoste knitted fabrics then rapidly increased after approximately 30.0% moisture content. The highest air drying shrinkage occurred over one cycle with insignificant changes in shrinkage after repeated treatments.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.665-670
• /
• 2004

This paper reviews the latest studies of the expander cycle Air Turbo Ramjet engine (ATREX) conducted in JAXA. First, a system analysis including the vehicle and trajectory was conducted to optimize the engine cycle and turbo-machine configuration. We selected the precooled turbo-jet cycle for a prototype engine using the near term technologies. Second, a system ground-firing test was conducted to verify a defrosting system for the precooler. Methanol injection with its particles atomization could compensate 80 % of pressure loss caused by the frost. Thirdly, a feasibility of carbon/carbon composites for the engine components was investigated by making complex shapes such as a heat exchanger and a plug nozzle. Basic technologies on the gas leakage, the junction and bonding were also studied. The end of the paper, some basic studies such as wind tunnel tests of a new type air inlet and a plug nozzle are described.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1834-1839
• /
• 2003

Temperature and velocity distributions of hot air flows in rotational molding machines with two different shapes and structures of oven and inlet were investigated by using FLUENT, a commercial computational fluid dynamics code. The shape and structure of oven and inlet in current rotational molding machine were improved. Two different sizes of mold inside each oven were considered in the analysis. Temperature and velocity distributions of hot air flows in two different rotational molding machines were compared to each other. In order to reduce cycle time and improve product quality in current rotational molding machine, the improved shape and structure of oven and inlet were proposed.

• 한국추진공학회지
• /
• 제16권1호
• /
• pp.64-71
• /
• 2012

환경조절장치는 일반적으로 냉각기계와 열교환기를 주요 구성품으로 한다. 그런데, 본 연구에서는 환경조절장치의 천이성능 향상을 위하여 상변화 열교환기를 추가하는 새로운 개념을 제시하였다. 그 효과는 상변화 열교환기를 포함하는 환경조절장치의 모델링 프로그램을 개발하여 이륙, 기동, 순항, 착육 등과 같은 다양한 비행조건에 대하여 평가되었다. 다양한 조건에서의 시뮬레이션 결과, 회수되는 공기의 온도가 $80^{\circ}C$ 이내를 유지하는 것이 확인되어, 상변화 열교환기를 포함하는 새로운 환경조절장치의 개념이 성공적으로 검증되었다.

• 설비공학논문집
• /
• 제15권5호
• /
• pp.432-438
• /
• 2003

This paper describes a modified Roebuck compression device as a potential compression device of a rotating cryogenic refrigeration system in superconducting machine such as generator or motor. The conventional cryogen transfer method from stationary refrigeration system to rotating system can be eliminated by an on-board cryogenic refrigeration system that utilizes well-designed multi-stage modified Roebuck compression device. This paper shows basic thermodynamic analysis of modified Roebuck compression device and its application for compressing neon at 77 K with substantial pressure ratio when the rotor diameter is 0.8 m with rotating speed of 3600 rpm. The device does not require any moving part in rotating frame, but two separate thermal reservoirs to convert thermal energy into mechanical compression work. The high temperature thermal reservoir is atmospheric environment at 300 K and the low temperature thermal reservoir is assumed as a liquid nitrogen bath at 77 K. The concept of the compression device in this paper demonstrates its usefulness of generating high-pressure neon at 77 K for rotating J-T neon refrigeration cycle of superconducting rotor.