• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.16-17
• /
• 2018

A few years ago, the rapid degradation of domestic air quality has led to the efforts of exhaust gas policy and fine dust mask, but it is not a fundamental measure. In Korea, photocatalyst will be applied to residential and multi-use facilites to purify indoor and outdoor air. Also, in this study, it is tried to produce exposed concrete that is aesthetically pleasing as well as air purification of indoor by combining with light transparent concrete according to the increasing interest in human indoor living environment. For this purpose, we have developed a block formwork for photocatalysis light transparent concrete and established a suitable manufacturing method for on-site construction.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.700-707
• /
• 2005

The human being continued the processing of improvement for well being life according to scientific results The other hand, All the seaman life take the rest and sleep in ship's office and living room. In this case, many crew took the pain of back spain or deposit the his fatigue, This will be decrease the productivity owing to crew's back spain or fatigue etc. In this study researched the problem of ship's bed mattress and the principle of Well being air mattress in technical standard etc. Specially decreased some kinds of bacillus, germ and many kinds of bacteria by using of tourmaline which emitted the far red light and negative ion from surface of the mattress. We developed and applied the ship's Well being air mattress to off shore and various kind of ship by International Labour Organization convention 192.

• Journal of the Korea Convergence Society
• /
• v.10 no.4
• /
• pp.147-151
• /
• 2019

Modern people spend most of their daily lives in their homes, schools, or workplaces, hospitals, shopping malls, subway stations, rooms, and parking lots. According to the survey, air quality management at the multi-use facility is less than 50% satisfied. In this study, a photocatalytic filtration system is developed by utilizing a broadband-to-active photocatalyst that utilizes a media photocatalyst filter that removes airborne germs from indoor air as well as indoor air quality and operates on visible light as well as ultraviolet light.

• International Journal of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.31-37
• /
• 2017

Recently Drone technology is emerging as an alternative new way of distribution systems services. Amazon, Google which are global network chain distribution companies are developing an idea of Drone based delivery service and applied for patent for Drone distribution systems in USA. In this paper, we investigate a way to adopt Drone system to Air Cargo logistics, in particular, drone system based on combination of Light ID and RFID technology in the management procedure in stock warehouse. Also we explain the expected impact of Drone systems to customs declaration process. In this paper, we address the investigated limitations of Drone by the Korean Aviation Act as well as suggest the directions of future research for application of Drone to Air logistics industry with investigated limitations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.174-174
• /
• 2014

Memristor devices are one of the most promising candidate approaches to next-generation memory technologies. Memristive switching phenomena usually rely on repeated electrical resistive switching between non-volatile resistance states in an active material under the application of an electrical stimulus, such as a voltage or current. Recent reports have explored the use of variety of external operating parameters, such as the modulation of an applied magnetic field, temperature, or illumination conditions to activate changes in the memristive switching behaviors. Among these possible choices of signal controlling factors of memristor, photon is particularly attractive because photonic signals are not only easier to reach directly over long distances than electrical signal, but they also efficiently manage the interactions between logic devices without any signal interference. Furthermore, due to the inherent wave characteristics of photons, the facile manipulation of the light ray enables incident light angle controlled memristive switching. So that, in the tautological sense, device orienting position with regard to a photon source determines the occurrence of memristive switching as well. To demonstrate this position controlled memory device functionality, we have fabricated a metal-semiconductor-metal memristive switching nanodevice using ZnO nanorods. Superhydrophobicity employed in this memristor gives rise to illumination direction selectivity as an extra controlling parameter which is important feature in emerging. When light irradiates from a point source in water to the surface treated device, refraction of light ray takes place at the water/air interface because of the optical density differences in two media (water/air). When incident light travels through a higher refractive index medium (water; n=1.33) to lower one (air; n=1), a total reflection occurs for incidence angles over the critical value. Thus, when we watch the submerged NW arrays at the view angles over the critical angle, a mirror-like surface is observed due to the presence of air pocket layer. From this processes, the reversible switching characteristics were verified by modulating the light incident angle between the resistor and memristor.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.8
• /
• pp.395-401
• /
• 2015

Recently, many research studies have been carried out on the efficiency of light-shelf daylighting systems, especially comparing performance improvements and the limitations of reflective surfaces and their lighting performance. In this study, a crystal face reflective surface is proposed. The objective of the study is to evaluate the lighting performance of a crystal face light-shelf through a performance study. The performance study was carried out in a full scale test-bed in order to calculate the light distribution and energy consumption utilizing the standard indoor illumination as an index. The conclusions of the performance study are as follows. 1) The optimal angle of incidence for daylighting for both the operable flat type light-shelf and the crystal face light-shelf are taken in the natural environment on the dates of the winter and summer solstices, as well as the autumn and spring equinoxes. 2) The application and installation of the crystal face light-shelf can produce a 29.9%~34.3% increase of light distribution within the indoor space. However, the increase of light distribution can also lead to a decrease in the uniformity ratio, a design challenge that should be considered when applying a crystal face light-shelf. 3) It is possible to achieve a 7.98%~13.3% greater reduction in energy consumption when applying a crystal face light-shelf than when applying a flat type light-shelf. The increase in the number of crystal faces should concur with the analysis of the energy reduction. A limitation of the study is that only one predetermined pattern was performance tested for a crystal face light-shelf. In order to carry out further research on crystal face light-shelves, additional performance studies are needed based on alternative patterns and designs.

• Journal of Digital Contents Society
• /
• v.10 no.2
• /
• pp.299-307
• /
• 2009

It is well-known that the scenic visibility achieved in our naked eyes is related with the quality of aerosol condition which is composed of primary and secondary air pollutants. In recent, the IMPROVE organization in U.S.A. has developed two algorithms to estimate the visible length depending on the elements of air pollutant. Using these algorithms, we are to represent the condition of aerosol quality with the well-known scenic images of the observing area so that any one that have no sufficient chemical knowledge may feel and understand the level of air pollution in visuality.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.4
• /
• pp.21-29
• /
• 2010

The main purpose of this study is to obtain linear models for the design of automatic flight controller in order to operate the Light Sport Aircraft as unmanned air vehicle. Flight test equipments installed on the aircraft to acquire flight test data are described and maneuvers for practical speed calibration are introduced. Parameters for the linear models of lateral and longitudinal motion are estimated by the Output error method as well as trim data analysis using the flight test data. Simulated data using the estimated parameters is shown to agree well with the measurement data. Estimated parameters obtained for several flight conditions can be used to improve the aerodynamic database of the simulation program.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.2
• /
• pp.147-158
• /
• 2017

Among the energy consumption in building, the heating energy takes the largest part. Therefore, it is important to minimize the heat energy loss in building for the reduction of overall energy use in construction. The most important points for the minimization of energy loss in building are insulation and airtightness. Especially, in wood houses, airtightness is very important for energy saving as well as increase of durability. However, the researches on airtightness of wood buildings have been started recently and are very deficient especially in Korea. In this study, air leakage properties and airtightness performance were evaluated for light-frame wood houses built in Daejeon and Chungnam area. Total 7 houses were evaluated, among which four houses (Case 1 to Case 4) were in the construction stage before interior finish and the other three houses (Case 5 to Case 7) were after completion of construction work. The tests for airtightness were conducted by pressurization-depressurization method, and the factors included in the measurements includes air leakage rate at 50 Pa (CMH50), air change rate at 50 Pa (ACH50), equivalent leakage area (EqLA) and EqLA per floor area. As a result of this study, key air leakage points in wood houses were found to be the gaps between floor and wall, the holes for wiring and plumbing, the double glasses windows and the entrance doors. The average value of ACH50 for the houses after completion of construction work was $3.5h^{-1}$ that was similar to Europe standard ($3.0h^{-1}$). ACH50 was proportional to EqLA per floor area but inversely proportional to the internal volume, the net floor area and the area of window.

• Journal of Biosystems Engineering
• /
• v.31 no.5 s.118
• /
• pp.449-453
• /
• 2006

Effect of light quality on plant temperatures at joining parts of grafted watermelon seedlings was investigated using a thermal imaging system in this study. Plant temperatures at joining parts lowered than those at stem region during graft-taking. However, difference in plant temperatures at joining parts and at stem region decreased by days after graft-taking. Plant temperatures of grafted seedlings graft-taken under white, blue, red, and blue + red fluorescent lamps repeatedly fluctuated high at photoperiod and low at dark period. Considering the variation of plant temperatures at joining pa퍼5, the illumination of blue and red light as well as white light will be effective for grafting of grafted watermelon seedlings. It is recommended that air temperature around grafted seedlings should be maintained at 27 to $29^{\circ}C$ for enhancing the physiological reaction of callus and for the smooth joining of scion and rootstock.