• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.547-550
• /
• 2005

Gauge blocks are the most widely used material measure in length field in industry. The gauge block interferometer, which is the gauge block measuring system, comprises Twyman-Green type interferometer optics and light sources having precisely known wavelengths. This paper describes the work done for advancing the measurement system and automating the measurement process. The advancing of the system was done mainly by exchanging the spectral lamp with the frequency stabilized lasers, and the automation of measurement was achieved by modifying the hardware and developing the automatic measuring software. As the results of this work, the contrast of interferometric fringes of gauge blocks longer than 100 mm s enhanced about 20 times, and the measurement time has reduced down to 50% by automation.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.105-108
• /
• 2006

The fuel cell is one of the promising environment-friendly energy sources for the next generation. The fuel cell provides good energy efficiency above 40% without pollution or noise. Different fuel cell types are usually distinguished by the kind of electrolyte. Among these, the proton exchange membrane fuel cell (PEMFC) has advantages of high power density. low operating temperature, relatively quick start-up, and rapid response to varying loads. The bipolar plate is a major component of the PEM fuel cell stack, and it takes a large portion of stack volume, weight and cost. In this study, as alternative materials for bipolar plate of PEM fuel cells, graphite composites were fabricated by compression molding and by machining. Graphite particles mixed with epoxy resin were used as the main substance to provide electric conductivity. Flow channels were fabricated by compression molding with design of experiments (DOE) to evaluate moldability. The cost for compression molding of graphite-composite bipolar plate was compared with machining cost to make the same bipolar plate.

• 한국정밀공학회지
• /
• 제23권4호
• /
• pp.91-98
• /
• 2006

A light guide panel (LGP) is an element of the LCD back light unit, which is used for display devices. In this study, the laser marking process is applied to the fabrication of light guide panels as the new fabrication process. In order to obtain a light guide panel which has high luminance and uniformity, four principal parameters such as power, scanning speed, ratio of line gap, and number of line were selected. A Web-based design tool was developed to generate patterns of light guide panel at any location, and the tool may assist the designer to develop optimized patterns. Topcon-BM7 was used for luminance measurement of each specimen with $100mm{\times}100mm$ area. By Taguchi method optimized levels of each parameters were found, and luminance of $3523cd/cm^2$ and uniformity of 92% were achieved using the laser machined BLU.

• 한국항공우주학회지
• /
• 제30권5호
• /
• pp.48-55
• /
• 2002

항공기용 복합재의 보수를 보조하는, 보수 제안 서비스 (Repair Advisory Service, RAS)라는 인터넷 기반의 소프트웨어가 개발되었다. 웹 브라우저를 유저인터페이스로 하는 RAS는 보수된 복합재의 파괴하중 계산, 구조 보수 지시서 (SRM) 제공 및 검색 등을 보수 엔지니어에게 거리에 제약을 받지 않고 제공한다. 본 논문에서는 RAS의 기능을 겹치기 기술(lap repair)에 의해 보수된 복합재의 파괴하중을 계산하는 모델을 예로 보여준다. 이 모델은 기초복합재와 보수층에 있는 각 복합재 층의 이방성을 고려하여 개발되었고, 기초복합재와 보수복합재 사이의 경계층의 비탄성을 고려하였다. 모델에 의한 파괴하중은 실험결과와 유사한 결과를 보여준다.

• 한국정밀공학회지
• /
• 제23권7호
• /
• pp.101-107
• /
• 2006

Cold gas dynamic spray or cold spray is a novel manufacturing method for coatings. Cold spray is a high rate and direct material deposition process that utilizes the kinetic energy of particles sprayed at high velocity (300-1,200m/s). In this research, a technique to repair the damaged mold by cold spray deposition and mechanical machining was proposed. An aluminum 6061 mold with three-dimensional surface was fabricated, intentionally damaged and material-added by cold spray, and its original geometry was re-obtained successfully by Computer Numerical Control (CNC) machining. To investigate deformation of material caused by cold spray, deposition was conducted on thin aluminum plates ($100mm{\times}100mm{\times}3mm$). The average deformation of the plates was $205{\sim}290{\mu}m$ by Coordinate Measurement Machine (CMM). In addition, the cross section of deposited layer was analyzed by scanning electron microscopy (SEM). To compare variation of hardness, Vickers hardness was measured by micro-hardness tester.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.393-395
• /
• 2009

We fabricated oxide and oxide/organic hybrid TFTs on a glass substrate using the photolithography process under $200^{\circ}C$. We adopt the solution processed organic ferroelectric materials of P(VDF-TrFE) and polyimide (KSPI) insulator for 1-T structure memory and flexible device, respectively. All devices have successfully operated and showed the possibility of hybrid TFTs for the application to the flexible electronic devices.

• Journal of Acupuncture Research
• /
• 제15권2호
• /
• pp.407-425
• /
• 1998

We have studied the clinical application of burning acupuncture by examining 18recent-published papers in the journal 'ZHONGGUO ZHENJIU(中國鍼灸)' for the bibliographical study and clinical study and have given medical treatment of burning acupuncture on 21 Patients who suffered 'the body chill symptoms(冷症)' at the oriental hospital of Won-Kwang University, Kwang-Ju. As a result, we have come to some conclusions as below. 1. The diseases for which the modern borning acupuncture is efficacious are widely extended to various kinds of field such as surgery, internal medicine, gynecology, ophthalmology, otolaryngology. etc. as well as numbness, meridian muscle disease(經筋病) mentioned in 'Neijing(內徑)' . 2. The effects of burning acupuncture therapy are wen zhuang yang qi(溫壯陽氣), sheng ji lian chuang(生肌斂瘡), san han chu shi(散寒除濕), qu fens zhi yang(祛風止痒), qu yu chu fu pai nong(祛瘀除腐排膿), san jie xiao zhong(散結消腫), zhi tong huan ji chu ma mu(止痛緩急除麻木), qing re xie hue jie du(淸熱瀉火解毒). 3. The recently reported diseases for which burning acupuncture is good are internal and external humeral epicondylitis, atheroma, menorrhalgia, thecal cyst, tragomaschalia, pruritus, traumatic onychophemia, gout of feet, prostatomegaly, aacne, supprative infection of body surface, snapping finger, backache, numbness, pyocyst etc. 4. The subjective symptoms of 'the body chill symptoms(冷症)' were, most of all, feeling cold accompanied by pain(16 case), while just 4 cases were feeling cold only. 5. In the related diseases of the body chill symptoms(冷症), feeling pain like arthralgia was the most case, and then dysmenorrhea, menorralgia, depression, anemia in order. 6. In the D.I.T.I before and after burning acupuncture treatment, 6 patients had shown 'excellent' effects and 8 patients had turned out 'good', while 7 patients had become'fair'. 7. In the degree of patient-satisfaction, 5 patients announced 'excellence' and 6 patients expressed 'good', 4 expressed 'fair', while the other 6 showed no change. 8. In the correlation of D.I.T.I and patient-satisfaction, the better the result of clinical treatment was, the more satisfied the patient was, however, in the case 'fair', we saw the degree of patient-satisfaction was relatively low, so we could admit the judging significance of D.I.T.I.

• Korean Chemical Engineering Research
• /
• 제52권2호
• /
• pp.175-181
• /
• 2014

고분자전해질 연료전지용 MEA(Membrane and Electrode Assembly)와 가축분뇨를 이용해 미생물연료전지(MFC)를 구동하였다. 여러 균을 혼합해 MFC를 구동했을 때 개별적으로 구동했을 때보다 높은 개회로전위(OCV)를 나타냈다. 돼지분뇨, 소분뇨, 닭분뇨, 오리 분뇨 중 돼지 분뇨를 이용했을 때 제일 높은 OCV 540mV를 보였다. 그리고 돼지분뇨에서 최고 $963mW/m^2$의 전력이 발생하였다. MFC 구동과정에서 MEA의 $Na^{2+}$, $Ca^{2+}$, $K^+$ 이온 및 불순물들에 의한 오염이 MFC의 낮은 성능의 한 원인임을 확인하였다.

• 생약학회지
• /
• 제40권3호
• /
• pp.238-243
• /
• 2009

We examined ethanol extracts prepared from 23 Korean local plants obtained in Pyeongchang, Gangwon-do for their inhibitory effects on recombinant human AKR 1 B10 (rhAKR1B10) in vitro. To do this, rhAKR1B10 was first expressed in E. coli as a biological active form and purified by using Ni-affinity chromatography followed by gel permeation chromatography. Then, rhAKR1B10 was used for screening out 23 Korean local plant extracts having an inhibitory activity against itself. Among them, six extracts showed more than 50% inhibition of rhAKR1B10 activity at the concentration of $10{\mu}g$/ml. Especially, the extracts of Ligularia fischeri var. spiciformis Nakai and Rhus trichocarpa Miq. were the most potent because their $IC_{50}$ values were 2.94 and $2.00{\mu}g$/ml, respectively.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 1997년도 학술대회
• /
• pp.164-166
• /
• 1997

MR arthrography is a useful modality for evaluating the labrocapsular ligamentous complex(LOLC) of the shoulder. This study was performed to describe normal anatomic variations and pitfalis in image interpretation related to evaluation of the LOLC. MR Arthrogram of 56 shoulders in 41 asymptomatic young, active volunteers were prospectively reviewed to evaluate the labral shapes. capsular insertions and images which may mimic the lesions of glenohumoral instability. The anterior and posterior parts of the labra. respectively. varied in shape: triangular$(72\%,\; 36\%)$. round $(13\%,\; 35\%)$. cleaved$(8\%,\; 1\%)$. notched$(2\%,\; 0\%)$. flat$(5\%,\; 24\%)$ and absent$(0\%,\; 4\%)$. The anterior and posterior capsular insertions. respectively. varied in sites: Mosely and Oevergaard type I$(82\%,\;62\%)$, type II$(13\%,\; 3\%)$ and type III $(5\%,\; 2\%)$. A number of pitfalls in image interpretation were discovered. Articular cartilage undercutting the labrum$(29\%)$ and middle glenohumoral ligament in proximity to anterior labrum $(5\%)$ simulated a labral tear. Joint fluid interposed in the central. superior portion of the sublabral sulci$(25\%)$ simulated a SLAP lesion. Synovial fold$(38\%)$ in axillary pouch resembled a loose body. Knowledge of normal variations and pitfalls in MR arthrogram image interpretation of labral capsular - ligamentous complex will help the orthopedist to accurately detect debilitating derangements associated with the glenohumeral instability.