• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.768-770
• /
• 2015

유전체 염기서열 분석비용이 크게 감소하면서 유전체 정보 생산이 본격화됨에 따라 시스템 생물학 기반의 통합 및 표준화된 오믹스 데이터베이스 구축이 필요하다. 이에 따라 현재 진행중인 연구 수행의 결과로 얻어진 차세대유전체서열(NGS) 및 전사체(transcriptome) 등의 대용량 정보를 수집하였고 이를 표준화 형식에 맞춰 농업생명공학정보센터(NABIC)에 등록하였다. 또한 농업생명자원 생물정보를 품목별, 개체별로 통합 저장소를 구축하였으며 농업생명자원 생물정보를 품목별, 개체별로 통합 저장소를 구축하였다. 농업생명공학정보센터 오믹스 정보등록시스템 서비스와의 연계 및 확충작업을 하기위해 시스템 기능 개선 및 유지보수 작업을 수행하였다.

• 한국농공학회논문집
• /
• 제62권5호
• /
• pp.85-91
• /
• 2020

In order to calculate the Crop Water Stress Index (CWSI), it is necessary to collect weather data (air temperature, humidity, wind speed and solar radiation) and canopy temperature. However, it is not always available to have necessary data sets for CWSI calculation. Therefore, this study was aimed to develop an easy and simple CWSI equation (CWSI_EE) using only two data, air and canopy temperatures. Infrared sensors and weather sensors were installed on apple and peach trees and nearby a study area and every ten-minute data were collected from June to October in 2018 and 2019, respectively. A relationship between air-canopy temperature difference and CWSI was statistically analyzed and used to develop CWSI_EE using the three dimensional Gaussian model. The performance of CWSI_EE against original CWSI showed R² and NSE to 0.780 and 0.710 for apple trees and R² and NSE to 0.884 and 0.866 for peach trees. This study found that the level of crop water stress could be easily calculated using CWSI_EE with only air and canopy temperature data.

• 농업과학연구
• /
• 제46권4호
• /
• pp.999-1006
• /
• 2019

Recently, the quantitative management of agricultural water supply, which is the main source for water consumption in Korea, has become more important due to the effective water management organization of the Korean government. In this study, the estimation method for irrigation supply based on agricultural reservoir storage data was improved compared to previous research, in which drought year selection was unclear, and the outlier data for the rainfall-irrigation supply were not eliminated in the regression analysis. In this study, the drought year was selected by the ratio of annual precipitation to mean annual precipitation and the storage rate observed before the start of irrigation. The outlier data for the rainfall-irrigation supply were eliminated by the Grubbs & Beck test. The proposed method was applied to nine agricultural reservoirs for validation. As a result, the ratio of annual precipitation to mean annual precipitation is less than 53% and the storage rate observed before the start of irrigation is less than 55% it was judged to be the drought year. In addition, the drought supply factor, K, was found to be 0.70 on average, showing closer results to the observed reservoir rates. This shows that water management at the real is appling drought year practice. It was shown that the performance of the proposed method was satisfactory with NSE (Nash-Sutcliffe model efficiency coefficient) and R² (coefficient of determiniation) except for a few cases.

• 한국농림기상학회지
• /
• 제25권2호
• /
• pp.99-107
• /
• 2023

농업은 기상에 매우 민감한 산업으로, 따라서 농업분야의 기상을 이용한 연구는 더욱 중요해지고 있다. 연구자들은 기상청과 농촌진흥청에서 제공하는 기상정보서비스 웹사이트에 접속해 기상관측자료를 다운로드할 수 있다. 그러나 대량의 기상자료를 받아야 할 때는 여러 번의 조회작업이 필요한 단점이 있다. 본 데이터 논문은 기상청과 농촌진흥청에서 수집한 자료를 원격 저장소 서비스인 깃허브에 업로드하고 소프트웨어 프로그램인 파이썬을 이용해 기상자료에 쉽게 접근할 수 있는 패키지를 제작했다. 이를 통해 추가적인 인증 절차 없이 누구나 자료를 가져갈 수 있는 방식을 채택하여 농업 관계자들의 기상자료에 대한 접근성 및 활용성을 높이는 방법을 제안한다. 자료와 패키지는 분산 버전 관리 시스템인 깃에 업로드하여 수정 및 관리가 용이하게 하였다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.26-31
• /
• 2005

In national prospective, the needs to develop water resources has been increased due to water shortage from diverse use of water resources in agricultural areas. Existing agricultural water demand, which has mainly been limited to the use of farming, are now expanding to diverse water uses such as supporting daily lives, diluting environmental pollution as well as industrial use for agricultural complex currently under construction in agricultural region. In this situation, for the sake of effective procurement of water resources and supply method, it is definitely required to enhance the effectiveness of budget investment and project proceedings through integrated re-development which links projects to strengthen existing dams, reservoirs and hydraulic facilities. The major scopes of this research includes developing different types of system such as selecting potential sites to re-construct reservoirs including generating base maps and thematic maps, data collection regarding water demands and reservoir status; analyzing reservoir data; estimating developable capacity and index calculation; and forecasting inundated areas. In addition, this study provides other products such as developing output generation system which can support wide use of data built and analyzed; database generation for better data management; data analysis including selection, extraction, indexation, and calculation of base items through standardization; data security system prohibiting exterior proliferation and malicious manufacturing of data.

• 농업과학연구
• /
• 제42권1호
• /
• pp.53-61
• /
• 2015

Development of highly efficient and energy-saving tractors has been one of the issues in agricultural machinery. For design of such tractors, measurement and analysis of load on major power transmission parts of the tractors are the most important pre-requisite tasks. Objective of this study was to perform pre-processing procedures before effective analysis of load data of agricultural tractors (30, 75, and 82 kW) during major field operations such as plow tillage, rotary tillage, baling, bale wrapping, and to select the suitable pre-processing method for the analysis. A load measurement systems, equipped in the tractors, were consisted of strain-gauge, encoder, hydraulic pressure, and radar speed sensors to measure torque and rotational speed levels of transmission input shaft, PTO shaft, and driving axle shafts, pressure of the hydraulic inlet line, and travel speed, respectively. The entire sensor data were collected at a 200-Hz rate. Plow tillage, rotary tillage, baling, wrapping, and loader operations were selected as major field operations of agricultural tractors. Same or different farm works and driving levels were set differently for each of the load measuring experiment. Before load data analysis, pre-processing procedures such as outlier removal, low-pass filtering, and data division were performed. Data beyond the scope of the measuring range of the sensors and the operating range of the power transmission parts were removed. Considering engine and PTO rotational speeds, frequency components greater than 90, 60, and 60 Hz cut off frequencies were low-pass filtered for plow tillage, rotary tillage, and baler operations, respectively. Measured load data were divided into five parts: driving, working, implement up, implement down, and turning. Results of the study would provide useful information for load characteristics of tractors on major field operations.

• Journal of Biosystems Engineering
• /
• 제40권3호
• /
• pp.284-288
• /
• 2015

Training power tiller operators in safe farming is necessary to avoid farming accidents. With the continuing progress in computational technology, driving simulators have become increasingly popular for conducting such training. Purpose: The objective of this study is to develop mock control devices and data acquisition apparatus for a tiller simulator. Methods: Except for the stand and tail wheel adjusting levers, the mock control devices were developed using a tiller handle assay. The data acquisition apparatus was realized using an embedded data-logging device and LabVIEW, the system design software. Results: The control devices of a real handle assay were successfully mimicked by the mock operator control devices, which used sensors for the relevant measurements. The data from the mock devices were acquired and transmitted to the main computer at intervals of 10 ms via Wi-Fi. Conclusions: The developed mock control devices operate similar to real power tillers and can be utilized in power tiller training simulators.

• 농촌지도와개발
• /
• 제19권2호
• /
• pp.211-240
• /
• 2012

The purpose of this study was to identify korean agricultural extension workers' Perception of role ambiguity according to restructuring of Agricultural Administrative Systems. The target population of this study was selected from 21 centers out of 156 centers. The subjects for study were 728 agricultural extension officers by the cluster sampling drawn from the sampled 21 agricultural extension centers in four clusters. A survey questionnaire was utilized to measure variables of this study. It consisted of role ambiguity scale and demographic items. In this study, role ambiguity scale was translated from the existing scale. Through a pilot test and final survey, reliability and validity of these scales were examined. The data were collected by mail. A total 420 questionnaires out of 728 from 21 agricultural extension centers were returned. After data cleaning, 410 responses were used for analysis. Both descriptive and inferential statistics were applied for data analysis. Major findings of the study were as follows. There were significant differences of the degree of role ambiguity among the local extension workers divided by four clusters. Especially, the degree of role ambiguity of restructured local administrative system were more higher than other clusters, comparatively. Thus, the factors causing the role ambiguity to agricultural extension officers need to be measured it in-depth.

• 한국농공학회논문집
• /
• 제54권6호
• /
• pp.65-76
• /
• 2012

Agricultural reservoir water quality simulation model (ARSIM-rev) was developed in this study for water quality simulation of a small and shallow agricultural reservoir with limited observed water quality data. Developed ARSIM-rev is a zero-dimensional water quality model because of little spatial differences in water quality between stations in a small and shallow agricultural reservoir. ARSIM-rev used same water quality reaction equations with WASP except for several equations, and daily based input parameters such as settling rate, release rate from sediment, and light extinction coefficient changed yearly based input parameters in ARSIM-rev. A number of pre- and post-processors were developed such as auto calibration and scenario analysis for ARSIM-rev. CE-QUAL-W2, WASP, and developed ARSIM-rev were applied to Mansu agricultural reservoir to evaluate model performance, and ARSIM-rev demonstrated similar model performance with CE-QUAL-W2 and WASP when low number of observed data was used for agricultural reservoir water quality simulation. Overall, developed ARSIM-rev was feasible for water quality simulation in a small and shallow agricultural reservoir with limited observed water quality data, and it can simulate agricultural reservoir water quality precisely enough like common water quality model such as CE-QUAL-W2 and WASP within a limited time.

• 한국농공학회논문집
• /
• 제63권1호
• /
• pp.27-35
• /
• 2021

KRC (Korea Rural Community Corporation) is in charge of about 3,400 agricultural reservoirs out of 17,240 agricultural reservoirs, and automatic water level gauges in reservoirs and canals were installed to collect reservoir and canal water level data from 2010. In this study, 10-minute water level data of 173 reservoir irrigation canals from 2016 to 2018 are collected, and discharge during irrigation season was calculated using rating curves. For estimation of water supply, irrigation water requirement was calculated with HOMWRS (Hydrological Operation Model for Water Resources System), and the summation of reservoir water storage decrease was calculated with daily reservoir storage data from RAWRIS (Rural Agricultural Water Resource Information System). From the results, the total yearly amount of irrigation water supply showed less than 10% difference than the irrigation water requirement. The regional analysis revealed that reservoirs in Jeollanam-do and Chungcheongnam-do supply greater irrigation water than average. On the contrary, reservoirs in Gyeongsangnam-do and Chungcheongbuk-do supply less than others. This study was conducted with a limited number of reservoirs compared to total agricultural reservoirs. Nevertheless, it can indicate irrigation water supply from agricultural reservoirs to provide information about agricultural water use for irrigation.