• Journal of Biosystems Engineering
• /
• 제43권4호
• /
• pp.285-295
• /
• 2018

Purpose: The aim of this study is to develop a three-wheel riding cultivator for improving the performance of the current four-wheel riding cultivators in the market. Methods: A prototype three-wheel riding cultivator with the rated power of 15.5-kW, a primary hydrostatic and a two-speed selective gear transmission shifts, front/rear three-wheel drive, a hydraulic wheel tread adjustment, and the mid-section attachment of the major implements was designed and constructed. Its specifications and basic performance are investigated. Results: The maximum speeds of the prototype at the low and high stages were measured to be approximately 7.31, and 11.29 km/h in forward travel, respectively, and approximately 3.60, and 6.37 km/h in rearward travel, respectively. The minimum ground clearance is shown to be 670 mm. The rotating speeds of the power takeoff (PTO) shaft at the low and high stages are shown to be approximately 795 and 1,140 rpm, respectively. The tread of the rear wheels, the minimum radius of turning, and the maximum lifting height of the parallel link device are measured to be within 1,320-1,720 mm, 2.80 m, and 390 mm, respectively. Approximately 25.3% and 74.7% of the total weight of the prototype are distributed in the front and rear wheels on flat ground, respectively. When the tread of rear wheels increased from 1,320 to 1,720 mm, the left and right static lateral overturning angles increased from $33.4^{\circ}$ to $39.1^{\circ}$ and from $29.0^{\circ}$ to $36.1^{\circ}$, respectively. Conclusions: The prototype three-wheel riding cultivator showed a wide range of travel and PTO speeds, high minimum ground clearance, small minimum radius of turning, and easy control of the rear wheel tread. Further, the easy observation of cultivating operations by mid-mounting the implements can improve quality of work. Therefore, the prototype is expected to contribute to the riding mechanization of cultivating operations for various upland crops in Korea.

• Journal of Biosystems Engineering
• /
• 제29권6호
• /
• pp.487-494
• /
• 2004

This study was conducted to develope a fertilizer-soil incorporation band tiller for the walking cultivator. Because the mixing of soil and fertilizer in the furrow of dry-field has been done manually, several time, heavy labor and much man power were required for the job. This rotary type implement is developed to substitute this manual operation for soil-fertilizer incorporation. The results of this study are summarized as follows : 1) This implement was composed of tilling device, fertilizer application device, frame and tail wheel device. 2) The revolution of driving wheel was $11\~28\;rpm$, that of application roller was $13\~14\;rpm$ the application rate range per revolution of driving wheel was $4.43\~11.80\;g$g and the application rate range by the working speed and the opening quantity was $84.12\~557.20\;g/min$. 3) The adequate working speed was $0.20\~0.40\;m/s$ and the required minimum width of open furrow was 250 mm.

• Journal of Biosystems Engineering
• /
• 제32권4호
• /
• pp.223-229
• /
• 2007

This study was conducted to develop a 2 row type band furrow tiller for a walking cultivator. The tillage and weeding operations in the furrow of dry fields has been done manually or chemical herbicide has been applied. The application of herbicide induces soil pollution and manual operation requires heavy labor. This 2-row type implement was developed to substitute this manual operation and to minimize soil pollution. The developed implement was composed of power transmitting device, tilling device, frame and tail wheel. The max. plowing width and depth were 300mm and 180mm, respectively. The revolutions of the hexagonal shaft and the tillage shaft were $227{\sim}376rpm$ and $355{\sim}590rpm$, respectively. The adequate working speed was $0.50{\sim}0.83m/s$ and the field capacity was $0.17{\sim}0.28hr/10a$.

• Journal of Biosystems Engineering
• /
• 제31권3호
• /
• pp.139-145
• /
• 2006

A previous study showed that the handle vibration of a walking type cultivator can be reduced by adding a mass to the handle. This study was conducted to determine the optimum magnitude and location of the mass to be added for the same cultivator. The possible locations of added mass were determined by investigating nodal points of the handle vibration by an ODS (operational deflection shapes) test at an engine frequency of 52 Hz. The optimum location was then determined as one that moved the nodal points to the hand grip of the handle bar. To determine the optimum magnitude of the mass, the possible locations were added by a mass from 0.2 to 2.0 kg in an increment of 0.2 kg. The optimum magnitude was then determined as a mass which minimized the vibration level at the hand grip. For the case of this study, the z-axis vibration at the hand grip was reduced from $2.67m/s^2\;to\;0.88m/s^2$ resulting in a reduction of 67% and the total vibration from $4.09m/s^2\;to\;3.27m/s^2$ resulting in a 20% reduction by adding an optimum mass to the optimum location.

• Journal of Trauma and Injury
• /
• 제28권2호
• /
• pp.60-66
• /
• 2015

Purpose: Cultivator accidents are frequent and often lead to abdomino-perineal organ injury and, if severe, to death. This study presents the clinical characteristics, outcomes, and factors associated with mortality in patients who sustained an abdomino-perineal organ injury in cultivator accidents. Methods: We retrospectively analyzed the records of 53 patients who visited the emergency department of a tertiary hospital with abdomino-perineal organ injuries caused in cultivator accidents from April 2005 to March 2010. Results: All 53 patients had visited other medical institutions before visiting our hospital. Their mean age was $64.0{\pm}11.1$ (range, 20-80) years and 32 (60.4%) patients were 65 or older. The male-to-female ratio was 46:7. The chief complaint was abdominal pain (38 cases, 71.7%). The 53 patients included 41 cultivator operators (77.4%), 11 passengers (20.8%), and 1 passerby (1.9%). The causes of the injuries included a direct impact of the handlebar in 20 cases (37.7%), a rollover in 21 cases (39.6%), a fall in 10 cases (18.9%), and a wheel in two cases (3.8%). Several of the 53 patients had injuries to multiple abdomino-perineal organs, and the injured organs included the liver (23 cases, 26.4%), spleen (16 cases, 18.4%), pancreas (7 cases, 8.0%), small bowel (7 cases, 8.0%), mesentery (6 cases, 6.9%), adrenal gland (5 cases, 5.8%), and other organs. According to the abbreviated injury scale (AIS) dictionary, a thoracic injury was the most frequent co-injury (33 of 53 cases, 62.3%). Abdomino-perineal surgery was performed in 31 cases (58.8%) and angio-embolization was performed for six liver and two kidney injuries. Thirteen patients died (24.5%); all were males. The Injury Severity Scale (ISS) was lower in the survivors ($17.8{\pm}8.5$ vs. $27.0{\pm}16.0$; p=0.010). Conclusion: With the aging of agricultural workers, safety education programs should be implemented. Furthermore, the patient transfer system in agricultural areas must be improved.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.446-459
• /
• 2000

This study was carried out in order to find out an effective machinery utilization strategy by conducting a survey on utilization and maintenance of agricultural machinery. The survey showed that the no. of utilization hours for power tiller in a year was 190.2hrs, 208.6hrs for tractor, 59.1hrs for rice transplanter, 74.0 hrs for combine, 44.6 cultivator and 254.4hrs for 4.4hrs for grain dryer. The period covered the time the machine was until it became unserviceable. The results are as follows: 10.0yrs for power tiller, 7.5yrs for tractor, 7.4yrs for rice transplanter and 5.4yrs for combine. This indicate that the actual period of use for power tiller and rice transplanter was longer than the expected period of duration years so there is a need for adjustment. The factors considered by the farmers for purchasing agricultural machine were: farm size(32%), machine operation (26.0%), performance(l4.0%) and post or after sales service(12.6%), according to the survey. It showed that repair cost rate in a year was classified into major agricultural machine; 4.8% for combine; 3.9% for tractor; 3.5% for rice transplanter; 2.0% for power tiller; 1.6% for grain dryer; and 1.2% for cultivator. The reasons for poor maintenance were insufficient after sales service(25%) and difficulty in buying parts(75%) because of the unavailability of parts in local shops(55%), imported models(30%) and outmoded model(15%).

• 한국토양비료학회지
• /
• 제46권5호
• /
• pp.313-321
• /
• 2013

The Average daily PET (Potential evapotranspiration), evaluated based on the last 30 years meteorological data and the lysimeter experiment carried out by RDA during 11 years, of 9 regions in Korea for the tomato cultivated in greenhouse, was $3.41mm\;day^{-1}$. Two kinds of water saving irrigation standard (WSIS), deficit irrigation standard (DIS) and partial root-zone drying irrigation standard (PRDIS) that include the irrigation interval and the amount of irrigation water according to the region, soil texture and growing stage, were established. According to the DIS and PRDIS, the cultivator can save water up to 29.2% and 53.7%, respectively, for tomato cultivation in greenhouse compared to the full irrigation standard (FIS) which established in 1999. WSIS can be used easily by the cultivator without complicate procedures such as soil sampling and measurement of soil water status by expensive sensors. But the cultivator should care about irrigation method such as PRDI (partial root-zone drying irrigation) without yield decrease.

• Journal of Biosystems Engineering
• /
• 제27권4호
• /
• pp.273-282
• /
• 2002

This study was intended to measure and analyze hand-transmitted vibrations from cultivator in idle and operation modes for three different types of field works. Based on this analysis a time for the white finger syndrome to appear on 10% of the operators was estimated assuming that their daily exposure is 3 hours. The 4 methods to reduce the hand vibration were also proposed and compared with each other. The results of the study were summarized as follows : The highest vibration level was recorded during trenching operation, resulting in a total average vibration of 11.5 m/s$^2$. Followings were 7.6 m/s$^2$ during rotary tillage and 7.0 m/s$^2$ for weeding. When exposed to these levels of vibrations three hours a day, the white finger syndrome is likely to appear in 4 years for trenching, 6.2 years for rotary tillage and 6.8 years for weeding operations. Isolation of hand vibration performed by a rubber pad, anti-vibration gloves, a handle anti-vibration device and engine mounts were respectively 15.7%, 16.5%. 26.1% and 27.0%, resulting in most effective methods of the handle anti-vibration device and engine mounts. A better performance of about 33.9% was achieved when both the handle anti-vibration device and engine mounts were used.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2003년도 하계 학술대회 논문집
• /
• pp.169-174
• /
• 2003

농업기계의 이용도 제고를 위해서는 원활한 부품공급에 의한 신속한 수리가 이루어 져야 한다. 특히 작업시기가 한정되어 있는 농업기계의 경우 고장발생시 신속한 수리가 이루어지지 않는다면 적기작업에 차질은 빚음은 물론 수리비부담과 시간까지 허비하게 되어 농업기계 이용비용을 가중시키게 된다. (중략)

• 한국토양비료학회지
• /
• 제18권2호
• /
• pp.189-193
• /
• 1985

경운방법(耕耘方法)의 차이(差異)가 토양(土壤)의 물리적특성(物理的特性)과 수도생육(水稻生育)에 미치는 영향(影響)을 구명(究明)하기 위(爲)하여 미사식양질답(微砂埴壤質畓)에서 경운기경운(耕耘機耕耘), 무경운(無耕耘), 로타리, 심경(深耕), 심토파쇄(深土破碎) 및 치슬프라우 등(等) 6개(個)의 상이(相異)한 경운조건하(耕耘條件下)에서 수도(水稻)를 재배(栽培)하였다. 1. 작업능률(作業能率)은 치슬프라우가 600a/hr로 가장 높았으며 트랙터심경(深耕)>심토파쇄(深土破碎)>로타리>경운기경운(耕耘機耕耘)의 순서(順序)로 낮아졌다. 2. 물리성개선(物理性改善) 효과(效果)는 토심(土深) 20cm까지는 트랙터 심경(深耕)과 치슬프라우가 양호(良好)하였으며, 20cm이하(以下) 깊이에서는 심토파쇄(深土破碎)가 효과적(效果的)이었다. 3. 수도수량(水稻收量)은 경운기경운(耕耘機耕耘)에 비(比)하여 로타리구(區) 4% 무경운구(無耕耘區)는 11% 감수(減收)되었고, 심경구(深耕區)는 5%, 심토파쇄(深土破碎) 4%, 치슬프라우는 3% 증수(增收)되었으며 작업능률(作業能率)과 수량면(收量面)에서 종합(綜合) 고찰(考察)해보면 심경구(深耕區)가 합리적(合理的)인 경운방법(耕耘方法)으로 판단(判斷)된다.