Browse > Article
http://dx.doi.org/10.5307/JBE.2002.27.4.273

Analysis and Isolation of Walking-type Cultivator Vibration Transmitted to Operator′s Hands  

박영준 (School of Bio-resources and Materials Engineering Seoul National University)
김경욱 (Professor Seoul National University)
Publication Information
Journal of Biosystems Engineering / v.27, no.4, 2002 , pp. 273-282 More about this Journal
Abstract
This study was intended to measure and analyze hand-transmitted vibrations from cultivator in idle and operation modes for three different types of field works. Based on this analysis a time for the white finger syndrome to appear on 10% of the operators was estimated assuming that their daily exposure is 3 hours. The 4 methods to reduce the hand vibration were also proposed and compared with each other. The results of the study were summarized as follows : The highest vibration level was recorded during trenching operation, resulting in a total average vibration of 11.5 m/s$^2$. Followings were 7.6 m/s$^2$ during rotary tillage and 7.0 m/s$^2$ for weeding. When exposed to these levels of vibrations three hours a day, the white finger syndrome is likely to appear in 4 years for trenching, 6.2 years for rotary tillage and 6.8 years for weeding operations. Isolation of hand vibration performed by a rubber pad, anti-vibration gloves, a handle anti-vibration device and engine mounts were respectively 15.7%, 16.5%. 26.1% and 27.0%, resulting in most effective methods of the handle anti-vibration device and engine mounts. A better performance of about 33.9% was achieved when both the handle anti-vibration device and engine mounts were used.
Keywords
Hand-transmitted vibration; White finger syndrome; Anti-vibration device; Walking-type cultivator;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 정수식, 김경욱, 문계송. 1993. 농용 트랙터의 승차진동 평가에 관한 연구(III)-승차진동의 측정과 평가-. 한국농업기계학회지 18(3):191-198.
2 International Organization for Standardization. 2001. ISO 5349-2: 2001(E). Mechanical vibration-Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace.
3 Yibin, Y., L. Zhang, F, Xu and M. Dong. 1998. Vibratory characteristics and hand- transmitted vibration reduction of walking tractor. Transaction of ASAE 41(4):917-922.   DOI
4 International Organization for Standardization. 2001. ISO 5349-1: 2001(E). Mechanical vibration-Measurement and evaluation of human exposure to hand-transmitted vibration- Part I: General requirements.
5 김대원. 2000. 인체의 팔굽진동 특성에 관한 실험적 해석. 한국소음진동공학회지 10(2):299-305.   과학기술학회마을
6 연정택, 박상규, 김소연, 이태영, 장재연. 1999. 금속가공 작업자의 국소진동 평가. 한국산업위생학회지 9(2):52-65.