• 한국재료학회지
• /
• 제15권12호
• /
• pp.791-795
• /
• 2005

In this study, aluminum borate whisker reinforced Mg-3Al-2Ag-1Zn matrix composites were fabricated by the squeeze infiltration technique. The purpose is to develop materials for elevated temperature applications. Microstructure observation revealed successful fabrication of the metal matrix composites, namely no cast defects such as porosity and matrix/reinforcement interface delamination etc. High temperature hardness and creep rupture properties were improved significantly with addition of Ag to the Al borate whisker reinforced Mg alloy composite. $Mg_3Ag$ phase formed during aging heat treatment could improve creep properties of the Mg matrix composites.

• Transactions on Electrical and Electronic Materials
• /
• 제3권3호
• /
• pp.8-13
• /
• 2002

Controlled precipitation of quasi-binary semiconductor system is newly proposed as an effective and reliable technique for the formation of well-defined and crystallographically aligned semiconductor nanostructures. Using HgTe-PbTe quasi-binary semiconductor system, self-aligned HgTe nanocrystallites distributed three dimensionally within PbTe matrix were successfully formed by the simple three step heat treatment process routinely found in age hardening process of metallic alloys. Examination of the resulting nano precipitates using conventional transmission electron microscopy (CTEM) and high resolution TEM (HRTEM) reveals that the coherent HgTe precipitates form as thin discs along the (100) habit planes making a crystallographic relation of {100}$\_$HgTe///{100}$\_$PbTe/ and [100]$\_$HgTe///[100]$\_$PbTe/. It is also found that the precipitate undergoes a gradual thickening and a faceting under isothermal aging up to 500 hours without any noticeable coarsening. These results, combined with the extreme dimension of the precipitates (4-5 nm in length and sub-nanometer in thickness) and the simplicity of the formation process, leads to the conclusion that controlled precipitation is an effective method for preparing desirable quantum-dot nanostructures.

• 한국식품과학회지
• /
• 제2권2호
• /
• pp.8-16
• /
• 1970

69종(種)의 각종 식물체(植物體)를 대상으로 하여 이것을 마쇄(磨碎)한 slurry로부터 총질소(總窒素)의 추출상황(抽？狀況)을 조사(調査)하고, 추출액(抽出液)으로 부터의 LPC의 제조방법(製造方法)을 검토(？討)하여 다음과 같은 결과(結果)를 얻었다. 1. 원료(原料)의 총질소(總窒素)의 함량(含量)이 클수록 총질소(總窒素)의 추출비(抽出比)는 커지며, 원료(原料)로부터의 추출(抽出)은 적어도 2회추출(回抽出)까지 필요(必要)하다. 원료엽체(原料葉體)로부터의 1차(次) 추출액(抽出液) $(E_1;\;%)$, 2次 抽出液$(E_2;\;%)$와 (T; %)사이에는 $E_1=0.8168T,\;E_2=0.1830T$의 1차(次) 관계식(關係式)이 성립(成立)한다. 2. pH 처리(處理)에 의한 LPC 생성(生成)에 있어서 pH 3 이하(以下)에서는 생성(生成)된 LPC의 색택(色擇)이 갈변(褐變)되고 제품(製品)의 탄력성(彈力性)이 커지며, 그 정도는 pH가 낮아질 수록 현저(顯著)해진다. pH 처리(處理)에 의한 LPC 생성(生成)의 지적(至適) pH 는 $3.5{\sim}4.5$ 라고 할 수 있다. 3 추출액(抽出液)으로 부터의 LPC의 생성(生成)은 TCA 처리(處理)> pH 4> pH 3> 열처리(熱處理)의 순서(順序)가 되며, TCA 처리(處理)에 비(比)하여 pH 4 처리(處理)는 10%감(減), pH 3 처리(處理)는 11.4%감(減), 열처리(熱處理)는 14.8%감(減)이었다. 4. pH 처리법(處理法)은 열처리법(熱處理法) 보다 LPC의 생성량(生成量)이 다소 높으나 대량처리시(大量處理時)의 pH 조절(調節)의 복잡성(複雜性)과 생성제품(生成製品)의 품질(品質)로 보아 열처리(熱處理)에 의한 LPC의 생성방법(生成方法)이 효과적(效果的)이고 간편(簡便)하다.

• Biomolecules & Therapeutics
• /
• 제23권1호
• /
• pp.77-83
• /
• 2015

The seed of Vigna angularis has long been cultivated as a food or a folk medicine in East Asia. Genistein (4',5,7-trihydroxyisoflavone), a dietary phytoestrogen present in this plant, has been known to possess various biological properties. In this study, we investigated the possible lifespan-extending effects of genistein using Caenorhabditis elegans model system. We found that the lifespan of nematode was significantly prolonged in the presence of genistein under normal culture condition. In addition, genistein elevated the survival rate of nematode against stressful environment including heat and oxidative conditions. Further studies demonstrated that genistein-mediated increased stress tolerance of nematode could be attributed to enhanced expressions of stress resistance proteins such as superoxide dismutase (SOD-3) and heat shock protein (HSP-16.2). Moreover, we failed to find genistein-induced significant change in aging-related factors including reproduction, food intake, and growth, indicating genistein exerts longevity activity independent of affecting these factors. Genistein treatment also led to an up-regulation of locomotory ability of aged nematode, suggesting genistein affects healthspan as well as lifespan of nematode. Our results represent that genistein has beneficial effects on the lifespan of C. elegans under both of normal and stress condition via elevating expressions of stress resistance proteins.

• 대한치과기공학회지
• /
• 제27권1호
• /
• pp.9-17
• /
• 2005

The use of titanium alloys as biomaterials is increasing due to their superior biocompatibility and enhanced corrosion resistance compared to conventional stainless steels and cobalt-based alloys. Ti-6Al-4V ($\alpha+\beta$type) alloy instead of pure titanium ($\alpha$type) is being widely used as biomaterials has some characteristics such as high fatigue strength, tensile strength and corrosion resistance. But it has been reported recently that the vanadium element expresses cytotoxicity and the aluminium element is related with dementia of Alzheimer type and neurotoxicity. In order to overcome their detrimental effects, $\beta$-phase stabilizer Nb was chosen in the present study. This paper was described the influence of phase changes of Ti-Nb alloys on mechanical properties. Ti-3wt.%Nb($\alpha$type),Ti-20wt.%Nb($\alpha+\beta$type) and Ti-40wt.%Nb($\beta$type) alloys were melted by vacuum arc furnace. The specimens were homogenized at 1050$^{\circ}C$ for 24hr and were then hot rolled to 50% reduction. Each alloys were solution heat treated at $\beta$ zone and $\alpha+\beta$ zone after homogenization and then were aged. The mechanical properties of Ti alloys were analysed by hardness test, tensile test, elongation test and SEM test. The results can be summarized as follows: 1) The higher hardness value of $\alpha+\beta$type alloy was obtained compared to the, $\alpha,\beta$type alloys. 2) The aged treated showed better hardness compared to the solution heat treated, homogenized. 3) In the case of solution and aging treatment at $\beta$region, the $\alpha+\beta$type alloy showed the most highest tensile strength and $\beta$type alloy showed the best elongation.

• Journal of Welding and Joining
• /
• 제31권3호
• /
• pp.31-38
• /
• 2013

The transition of serrated grain boundary and its effect on liquation behavior in the simulated weld heat-affected zone (HAZ) have been investigated in a wrought Ni-based superalloy Alloy 263. Recently, the present authors have found that grain boundary serration occurs in the absence of adjacent coarse ${\gamma}^{\prime}$ particles or $M_{23}C_6$ carbides when a specimen is direct-aged with a combination of slow cooling from solution treatment temperature to aging temperature. The present study was initiated to determine the interdependence of the serration and HAZ property with a consideration of this serration as a potential for the use of a hot-cracking resistant microstructure. A crystallographic study indicated that the serration led to a change in grain boundary character as special boundary with a lower interfacial energy as those terminated by low-index {111} boundary planes. It was found that the serrated grain boundaries are highly resistant to boron enrichment, and suppress effectively grain coarsening in HAZ. Furthermore, the serrated grain boundaries showed a higher resistance to susceptibility of liquation cracking. These results was discussed in terms of a significant decrease in interfacial energy of grain boundary by the serration.

• 한국재료학회지
• /
• 제19권12호
• /
• pp.692-698
• /
• 2009

Inconel 718 alloy has excellent mechanical properties at room temperature, high temperature and cryogenic conditions. UTS of base metal is about 900MPa at room temperature; this is increased up to 1300MPa after heat treatment & aging-hardening. Mechanical properties of Inconel 718 Alloy were similar to those shown in the the results for tensile test; mechanical properties of Inconel 718 alloy's GTAW were similar to those of base metal's properties at room temperature. Mechanical properties at cryogenic conditions were better than those at room temperature. Heat-treated Inconel 718, non- filler metal GTAW on Inconel 718 and GTAW used filler metal on Inconel 718's UTS was 1400MPa at cryogenic condition. As a result, the excellent mechanical properties of Inconel 718 alloy under cryogenic conditions was proved through tensile tests under cryogenic conditions. In addition, weldability of Inconel 718 alloy under cryogenic conditions was superior to that of its base-metal. In this case, UTS of hybrid joint (IS-G) at -100$^{\circ}C$ was 900MPa. Consequently, UTS of Inconel 718 alloy is estimated to increase from -100$^{\circ}C$ to a specific temperature below -100$^{\circ}C$. Therefore, Inconel 718 alloy is considered a pertinent material for the production of Lox Pipe under cryogenic conditions.

• 대한한방내과학회지
• /
• 제16권2호
• /
• pp.146-177
• /
• 1995

The purpose of this study was to investigate the relationship between the teeth and Zhang-Fu(臟腑), dental diseases, and the hygiene of the mouth through the literature of oriental medicine. First, the relatonship between the teeth and Zhang-Fu is reviewed as follows: The teeth are influenced by Shen(腎) because they are the end of bone and Biao(標) of Shen. Gingiva is related to Wei(胃) and Da-Chang(大腸) because it is passed by Yangming-Channel(陽明經). The growth and nutrition of teeth depends on Shen. The pathological condition of Shen causes the gingival atrophy, the loose of teeth, dedentition due to aging, withering of teeth, and tartar: whereas the pathological condition of Wei and Da-Chang causes toothache, gingivitis, inflamed gums, bad breath, and gingival hemorrhage. Second, the causes and therapies of dental diseases through the literature can be summarized as follows: The major causes of toothache are the pathogenic condition of wind-heat and wind-cold, the heat syndrome of Wei, the damp-heat of intestine, flaring-up of fire of deficiency type, rotten tooth, etc... The principal causes of dedentition and the shaking and loose of teeth are the deficiency of Shen, and the rest of causes are the damp-heat of Yangming. Gingival atrophy is caused by the deficiency of Shen, whereas the gingival hemorrhage comes from the factors in the pathogenic factor of wind-heat of Yangming-Channel, the heat syndrome of stomach, and the deficiency of Shen. The causes of grinding of teeth during sleeping are stomach-heat, and the delayed dentition and the withering result from the deficiency of Shen-Jing.(腎精) The principal therapies of toothache are removing wind and heat, clearing away heat and prompting diuresis, clearing away the stomach-heat, replenishing vital essence to tonify the Shen, relieving superficial syndrome by wind-cold, and alleviating pain by destroying parasites. For the prescription of the principal therapies, there are Xijio Dihuang Tang, Jiajian Ganlu Yin, Qufeng Wan, Qingwei San, Tiaowei Chenggi Tang Shengong Wan, Liangge San Qingwei Tang Yunu Jian, Liuwei Dihuang Wan Zuogui Yin Bawei Wan Wanshao Dan, Xixin San Badou Wan Gianghuo Fuzi Tang, Jiuzi Tang Badou Wan, etc... The therapies of dedentition and the shaking and loose of teeth are replenishing vital essence to tonify the Shen, and warming and recuperating the Shen-Yang: as the prescription, there are Liuwei Dihuang Wana Zuogui Yin, and Bawei Wan Anshen Wan Wanshao Dan Yougui Wan etc... The therapies of gingival hemorrhage are clearing away the stomach-heat, replenishing vital essence to tonify the Shen, warming and recuperating the Shen-Yang(腎陽), and moisturing and purging intence heat with the prescription of Tiaowei Chenggi Tang Xijiao Dihuang Tang, Liuwei Dihuang Wan Zuogui Yin, Bawei Wan Anshen Wan, and Yunu Jian. The therapy of gingival atrophy is replenishing vital essence to tonify the Shen in the prescription of Liuwei Wan Bawei Wan Ziyin Dabu Wan. The therapies of grinding of teeth during sleeping are clearing away the stomach-heat and purging intense heat, and invigorating the spleen through eliminating dampness in the prescription of Qingwei San, Wumei Wan, etc... The therapy of delaed dentition is replenishing vital essence to tonify the Shen with the prescription of Liuwei Wan Buyin Jian, etc... Third, clinical treatment reports of dental diseases are reviewed as follows: The toothache due to stomach-heat was treated by medical herbs like Gypsum, Natrir Sulfas, Rehmanniae, Schizonepetal Herba, Menthae Folium, Cimicifugae Rhizoma, and Scrophulariae Radix. The therapies of toothache due to flaring-up of fire in deficiency type from deficiency of Shen provided with replenishment of vital essence to tonify the Shen and clean ministerial fire, and the prescription was the kind of Liuwei Wan, which worked very well. The therapy of dedentition and loose of teeth due to deficiency of Shen was done to stablize the teeth as tonifing the Shen with the prescription of Guchi Wan. The rate of imrovement was over 90%. The destruction of periodontal tissue due to periodonititis was cured of dispelling wind, reducing heat, and alleviating pain, It was improved by taking Zizhi Xingiong Tang, Guchi Xiaotong San, Yunii Jian, and Qingwei San about 3-7 days, and the rate of improvement was over 80%. Fourth, the prevention and regimens are reviewed as follows: As a physical and breathing exercise of the teeth, tapping teeth which stimulates the circulation of Qi(氣) and Xue(血) had been used. The tapping time of 14, 17, 36, etc... has been reported, and it should be applied based on the body condition. The medical herbs for gargling and brushing teeth have been used. Specifically, Cimicifugae Rhizoma, Gypsum, Gypsum Fibrosum, and Indigo pulrelrata Lereis have been used to reduce heat, Coptidis Rhizama and Yang Jinggu to eliminate damp-heat, Amomi Semen, Cyperi Rhizoma, Flos Caryophylli, Asari Radix, Piperis Longi Fructus, Santali Albae Lignum, Meliae Fructus, Moschus, Aquillaiae Lignum, and Borneol to promote the circulation of Qi and to relieve pain, Ligustici Radix, Angelice Radix, Rhizoma Nardostachydis, Tribuli Semen to relieve superficial syndrome by means of diaphiresis, and Cnidii Rhizoma, Angelicae sinensis Radix, and Olibanum to promote blood circulation to stop pain.

• 한국식품영양과학회지
• /
• 제44권9호
• /
• pp.1347-1355
• /
• 2015

본 연구는 참외 착즙액을 동결농축 하여 열수 처리 및 아스코르브산 처리 후 갈변 억제에 의한 이화학적인 품질 특성과 휘발성 향기 성분을 분석하였다. 동결농축 공정에 의한 참외 와인은 발효 과정에서 열수 처리가 아스코르브산 처리에 비해 가용성 고형분 함량 및 환원당 감소가 빠르며, 알코올 생성 또한 빠른 것으로 나타났다. 갈변도와 색차 측정 결과 갈변 억제 효과가 열수/아스코르브산 병용 처리구> 아스코르브산 처리구> 열수 처리구> 대조구 순이었으며, 아스코르브산 처리 참외와인은 숙성 후에도 갈변 억제 효과가 유지되고 있는 것으로 나타났다. 유리당은 fructose만 검출되었으며, 유기산은 citric acid, malic acid, succinic acid 모두 아스코르브산 처리구에서 함량이 많게 나타났다(P<0.05). 항산화능은 DPPH 라디칼 소거 활성, FRAP 활성이 아스코르브산 처리구에서 높았으며, 총 페놀성 화합물의 함량은 아스코르브산 처리구에서 가장 높았고, 총 플라보노이드 함량은 대조구에서 가장 높게 나타났다. SPME head-space 법에 의한 비동결농축 및 동결농축 참외와인의 휘발성 향기 성분 분석 결과 총 33종의 향기 성분이 동정되었으며, ester 류가 10종으로 가장 많이 검출되었다. 동결농축 참외와인에서는 총 29종의 향기 성분이 동정되었으며, 비동결농축 참외와인에서는 총 23종이 동정된 것으로 나타났다. 과일 향을 나타내는 ethyl formate, ethyl butyrate, butyl alcohol 등의 향기 성분이 비동결농축 참외와인에서 검출되지 않은 것으로 보아 동결농축 참외와인은 비동결농축 참외와인에 비해 과일 특유의 향과 같은 다양한 향기 성분을 가지는 것으로 나타났다. 본 연구에서 열수 처리 및 아스코르브산 병용 처리는 동결농축 참외와인의 갈변 억제에 효과적이며, 항산화 활성을 증가시키는 것으로 나타났다.

• 센서학회지
• /
• 제11권6호
• /
• pp.327-334
• /
• 2002

초기 물질은 $SnCl_2{\cdot}2H_2O$와 $C_2H_5OH$를 사용하여 sol-gel 법으로 제조된 $SnO_2$ 미세 분말의 제반 물성과 전기적 센싱 특성에 대하여 검토하였다. Gel 분말은 sol을 72시간과 168시간 숙성(aging) 시킨 후 $120^{\circ}C$에서 건조하여 제조하였다. $600^{\circ}C$이하에서는 휘발성 물질이 제거되면서 $SnO_2$ 상이 증가하고. $700^{\circ}C$/30min 열처리로 $SnO_2$ 상 생성은 거의 완결된다. 입자 크기는 $700^{\circ}C$ 이하에서 30nm 이하로 유사하고 입도 분포도 좁았다. 전기적 성질 측정을 위한 시편은 후막법으로 알루미나 기판위에 제조하였다. 공기 중의 전도성은 $450^{\circ}C$ 부터 반도성 세라믹스의 진성(intrinsic) 거동을 보이고, $200-450^{\circ}C$ 구간에서는 $SnO_2$ 입자 표면에서의 산소흡착에 기인해서 전도성 변화가 작았다. 환원성 CO 기체에 대한 응답성, 회복성 그리고 감도 특성은 숙성일자 증가로 향상되었다.