• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1740-1743
• /
• 2002

This paper presents the basic concept of a Solid Freeform Fabrication System using a rapid prototyping procedure. The system can fabricate a ceramic model by laser cutting, accumulating, laminating and sintering of each slice. The system is mainly equipped with a laser apparatus, an x-y table, a material transfer system, and an electric oven. The system could fabricate a small object with smooth surface within comparatively short period of time. The system has also shown its effectiveness in terms of the direct application of the object without the secondary mechanical process. The fabricated sample could directly be applied and used to fairly wide practical areas.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.444-447
• /
• 2005

Increasing competition is due to internationalization in market. This result requires various products in a rapid development of product. Die design is one of bottleneck areas in product development. It takes 40% of total time for whole car development. Therefore a new method should be developed as a fundament on which the design process of die can be carried out effectively. This can be realized by using modular design based on standard template. In this paper a modular design concept will be discussed.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.79.3-79.3
• /
• 2019

GMACS is one of the first light instruments for the Giant Magellan Telescope (GMT). The development of GMACS control software follows Agile software development process, and the design of the software is based on the Unified Model Language (UML). In this poster, we present the architecture of the GMACS software and the development processes. As an example of the software development, we show the software of the Slit Mask Exchange Mechanism Prototype (SMEM-P) which is part of the GMACS Device Control Package (DCP).

• Annual Conference of KIPS
• /
• 2008.05a
• /
• pp.253-256
• /
• 2008

아직도 많은 프로젝트에서 지속적으로 변화하는 요구사항과 불가능한 납기일정 그리고 품질을 무조건 만족해야 하는 상황에 많은 개발자들이 괴로워하고 있다. 또한 최근 들어 프로젝트들이 그 개발의 방법으로 컴포넌트 기반 개발(CBD)를 많이 사용하고 있다. 이러한 상황에서 재사용성을 강조하는 품질 좋은 컴포넌트를 식별하고, 개발하기란 매우 어렵다. 또한 기존의 CBD 개발 방법의 프로세스가 요구사항을 초기에 고정하고, 그 기반 위에 여러 단계를 거치기 때문에, 납기기간이 짧거나, 요구사항이 고정되지 않았을 경우 많은 어려움에 직면하고 있다. 본 논문에서는 요구사항이 불명확하고, 납기일정이 짧은 프로젝트에서 유용하도록, 작은 단위의 반복과 그 피드백을 통해, 고객의 요구사항 변경에 빠르게 반응할 수 있고, 기존의 컴포넌트 개발 방법을 단순화한 기민한 컴포넌트 개발 프로세스를 제시한다. 이러한 제안된 기법의 실용성을 검증하기 위해 기존 식별 방법과의 비교, 평가를 제시한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.2
• /
• pp.157-164
• /
• 2011

As high-resolution satellite images have enabled large scale topographic mapping and monitoring on global scale with short revisit time, agile sensor orientation, and large swath width, many countries make effort to secure the satellite image information. In Korea, KOMPSAT-2 (KOrea Multi-Purpose SATellite-2) was launched in July 28 2006 with high specification. These satellites have stereo image acquisition capability for 3D mapping and monitoring. To efficiently handle stereo images such as stereo display and monitoring, the accurate epipolar image generation process is prerequisite. However, the process was highly limited due to complexity in epipolar geometry of pushbroom sensor. Recently, the piecewise approach to generate epipolar images using RPC was developed and tested for in-track IKONOS stereo images. In this paper, the piecewise approach was tested for KOMPSAT-2 across-track stereo images to see how accurately KOMPSAT-2 epipolar images can be generated for 3D geospatial applications. In the experiment, two across-track stereo sets from three KOMPSAT-2 images of different dates were tested using RPC as the sensor model. The test results showed that one-pixel level of y-parallax was achieved for manually measured tie points.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.2
• /
• pp.156-173
• /
• 2004

Business process should support the execution of collaboration process with agility and flexibility through the integration of enterprise inner or outer applications and human resources from the collaborative workflow view. Although the dependency of enterprise activities to the automated system has been increasing, human role is as important as ever. In the workflow modelling this human role is emphasized and the structure to control human error by analysing decision-making itself is needed. Also, through the collaboration of activities agile and effective communication should be constructed, eventually by the combination and coordination of activities to the aimed process the product quality should be improved. This paper classifies human errors can be occurred in collaborative workflow by applying GEMS(Generic Error Modelling System) to control them, and suggests human error control method through hybrid based modelling as well. On this base collaborative workflow modeling tool is designed and implemented. Using this modelling methodology it is possible to workflow modeling could be supported considering human characteristics has a tendency of human error to be controlled.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.72-79
• /
• 2015

A number of plating companies have been exposed to the risk of fire due to unexpected temperature increasing of water in a plating bath. Since the companies are not able to forecast the unexpected temperature increasing of water and most of raw materials in the plating process have low ignition temperature, it is easy to be exposed to the risk of fire. Thus, the companies have to notice the changes immediately to prevent the risk of fire from plating process. Due to this reason, an agile and systematic temperature monitoring system is required for the plating companies. Unfortunately, in case of small size companies, it is hard to purchase a systematic solution and be offered consulting from one of the risk management consulting companies due to an expensive cost. In addition, most of the companies have insufficient research and development (R&D) experts to autonomously develop the risk management solution. In this article, we developed a real time remote temperature monitoring system which is easy to operate with a lower cost. The system is constructed by using Raspberry Pi single board computer and Android application to release an economic issue for the small sized plating manufacturing companies. The derived system is able to monitor the temperature continuously with tracking the temperature in the batch in a short time and transmit a push-alarm to a target-device located in a remoted area when the temperature exceeds a certain hazardous-temperature level. Therefore, the target small plating company achieves a risk management system with a small cost.

• Journal of Digital Convergence
• /
• v.17 no.9
• /
• pp.199-212
• /
• 2019

Digitalization is creating a variety of changes and innovations in our business environment. In manufacturing, robots have long been used for automation to innovate processing speed and quality. The RPA brings these innovations in manufacturing sites to the office space. The purpose of this study is to improve productivity for simple, repetitive tasks in these office space. For identify the potential of automation related to productivity improvement, I looked at the concept of business automation, and then simulated the five areas of business documentation works with agile methodology. In conclusion, I confirmed that productivity improvement of 97.3% in quality inspection and 31.7% in editorial design is possible, and examined the direction to apply to actual work. Based on these results, future study will explore the application of Intelligent Process Automation (IPA).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.735-743
• /
• 2015

The service oriented architecture assures flexibility of enterprise application development, so it supports agile reaction to business change. On the other hand, considerable effort is needed to develop a service by combining business and constraint consumes because the entire combination logic should be changed according to the change in business rule. To improve the current method, this paper applied an aspect oriented approach to service system development. In this paper, the rule concern is proposed in addition to the core concern and cross cutting concern of aspect oriented approach. The rule concern is extracted from business rules included in the business processes and services. The rule concern is classified into the process rule aspect and service rule aspect according to the level of the rule. In the proposed approach, system is modularized into the core concern, cross cutting concern and rule concern through separation of concern, and they are maintained independently. Therefore, the adaptability, reusability, and maintainability of a service system will be enhanced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1824-1831
• /
• 2015

This study diagnosed the innovation capability of SMEs by utilizing the VIQ(Value Innovation Quotient) and deduced the innovation strategy. VIQ is the diagnosis tool for measuring the innovation capability of the SMEs focusing on the value innovation. SMEs can utilize this tool for diagnosis and deduce the innovation strategy. This study selected the high-growth venture company- K company and analyse it and deduced the innovation strategy. Innovation strategy can be as follows; Firstly, agile strategy formulation tool such as business intelligence and scenario planning should be adopted for the flexible business planning. Secondly, speedy decision making process should be made. Thirdly, open communication and empowerment process should be made. This paper can present the method of evaluating and diagnosis of value innovation capability of SMEs and innovation strategy formulation process.