• 한국건설순환자원학회논문집
• /
• 제4권2호
• /
• pp.125-135
• /
• 2016

본 연구에서는 부적합 골재의 유통방지 및 양질의 콘크리트용 골재 수급 및 공급을 통해 콘크리트의 품질 향상을 목적으로 수행되었다. 연구수행은 현재 국내의 골재 관련 표준규격과 외국 중 대표적으로 미국의 ASTM, 유럽의 EN, 일본의 JIS 등과 비교 검토함으로써, 표준 통합에 대한 필요성 및 타당성을 분석하였다. 이를 토대로 현재 분절되어 다발적으로 관리되고 있는 콘크리트용 골재관련 10종 KS를 KS F 2526 콘크리트용 골재로 통합하고자 한다. 이는 기존에 세분화되어 있는 모든 골재 규격들을 골재의 성인, 제조방법 등에 관계없이 콘크리트용 골재란 표현으로 통합이 가능하고, 통합된 표준 내에서 기존 10종의 골재 규격을 관리하는 것이 접근성, 개정의 편리함 및 골재 규정 상호간의 관계이해 등의 차원에서 보다 합리적인 방법이 될 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제87권3호
• /
• pp.221-229
• /
• 2023

Urbanization and industrialization have significantly increased the amount of solid waste produced in recent decades, posing considerable disposal problems and environmental burdens. The practice of waste utilization in concrete has gained popularity among construction practitioners and researchers for the efficient use of resources and the transition to the circular economy in construction. This study employed Lytag aggregate, an environmentally friendly pulverized fuel ash-based lightweight aggregate, as a substitute for natural coarse aggregate. At the same time, fly ash, an industrial by-product, was used as a partial substitute for cement. Concrete mix M20 was experimented with using fly ash and Lytag lightweight aggregate. The percentages of fly ash that make up the replacements were 5%, 10%, 15%, 20%, and 25%. The Compressive Strength (CS), Split Tensile Strength (STS), and deflection were discovered at these percentages after 56 days of testing. The concrete cube, cylinder, and beam specimens were examined in the explorations, as mentioned earlier. The results indicate that a 10% substitution of cement with fly ash and a replacement of coarse aggregate with Lytag lightweight aggregate produced concrete that performed well in terms of mechanical properties and deflection. The cementitious composites have varying characteristics as the environment changes. Therefore, understanding their mechanical properties are crucial for safety reasons. CS, STS, and deflection are the essential property of concrete. Machine learning (ML) approaches have been necessary to predict the CS of concrete. The Artificial Fish Swarm Optimization (AFSO), Particle Swarm Optimization (PSO), and Harmony Search (HS) algorithms were investigated for the prediction of outcomes. This work deftly explains the tremendous AFSO technique, which achieves the precise ideal values of the weights in the model to crown the mathematical modeling technique. This has been proved by the minimum, maximum, and sample median, and the first and third quartiles were used as the basis for a boxplot through the standardized method of showing the dataset. It graphically displays the quantitative value distribution of a field. The correlation matrix and confidence interval were represented graphically using the corrupt method.

• 한국지반공학회논문집
• /
• 제35권6호
• /
• pp.17-26
• /
• 2019

이 연구에서는 쇄석말뚝공법의 한계상태설계법 적용을 위하여 양질의 현장재하시험 자료로부터 저항편향계수의 통계적 특성을 분석하고 지반 불확실성 및 시공 오차를 고려한 총 저항편향계수를 산정하였다. 저항편향계수 산정을 위한 예측모델은 기존 모델들에 비하여 높은 예측성능을 보인 Bong and Kim(2017)의 MLR 모형을 활용하였으며 그 적합성을 평가하였다. 저항편향계수의 확률분포를 산정하기 위하여 카이제곱 적합도 검정을 수행하였으며 정규분포가 가장 적합한 것으로 나타났다. 공칭저항의 총 변동성은 점토의 비배수전단강도 및 쇄석말뚝 시공 시 발생할 수 있는 시공 오차에 대한 불확실성을 포함하여 산정하였다. 최종적으로 총 저항편향계수의 확률분포는 로그정규분포를 따르는 것으로 나타났다. 총 저항편향계수의 변동성에 따른 확률분포의 매개변수는 Monte Carlo 시뮬레이션을 통하여 산정하였으며, 간편한 적용을 위하여 이에 대한 회귀식을 제안하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권5호
• /
• pp.95-102
• /
• 2020

이 연구에서는 입경이 큰 골재를 사용하면서 2% 이상의 인장변형률 성능을 나타내는 고연성 PE 섬유보강 시멘트 복합체 개발을 목적으로 골재의 크기와 입도분포에 따른 고연성 섬유보강 시멘트 복합체의 인장거동 특성을 살펴보고자 하였다. 0.6 mm 이하의 입경들로 구성된 규사를 사용한 배합을 기준으로 최대입경 2.36 mm, 4.75 mm, 5.6 mm, 6.7 mm의 강모래 및 강자갈을 사용한 배합을 비교하여 성능평가를 실시하였다. 골재의 입도분포는 수정 A&A 모델에 기반한 최적입도분포곡선에 가깝도록 세분화된 입경별 혼합비율을 조절하였다. 직접인장실험을 통해 구한 인장거동은 모든 배합에서 뚜렷한 인장변형률 경화 거동을 보였다. 골재 입경별 혼합비율을 조절하여 입도분포가 최적곡선에 가깝도록 한 경우에는 모든 배합에서 규사를 사용한 경우보다 높은 인장변형률 성능을 나타내었다. 또한 골재의 최대입경이 커서 입도분포가 넓을수록 높은 인장변형률 성능을 보였으며, 최대입경 5.6 mm, 6.7 mm의 굵은 골재를 포함하는 경우 각각 4.83%와 5.89%의 매우 높은 인장변형률 성능을 나타내었다. 이 연구를 통해 적절한 입도분포 조절을 통해 굵은 골재를 사용하면서도 고연성 섬유보강 시멘트 복합체의 제조가 가능함을 보였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 봄 학술발표회 논문집
• /
• pp.34-39
• /
• 1993

Recently inappropriate aggregates are used as a raw material for ready-mixed concretes, due to the shortage of natural aggregate resources and the prohibition of their extraction for the environmental protection. We, therefore, have conducted experiments to obtain some knowledge of properties of domestic aggregates and to investigate subsequent changes in the properties of the fresh and hardened concretes. To this end, aggregates currently used in 13 domestic ready-mixed concrete plants were collected. Most of aggregate used in this experiment satisfied the KS in density and unit weight. But some of the aggregates have the particle size distribution that can effect bad influence on concrete. In this experiment the aggregates are found to have a bad particle size distribution, resulting in high amount of a unit water content and a unit cement content in concrete.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권7호
• /
• pp.2338-2353
• /
• 2015

In this paper, the optimal power allocation algorithm that minimizes the aggregate bit error rate (BER) of the secondary user (SU) in a downlink orthogonal frequency division multiplexing (OFDM) based cognitive radio (CR) system, while subjecting to the interference power constraint and the transmit power constraint, is investigated under the assumption that the instantaneous channel state information (CSI) of the interference links between the secondary transmitter and the primary receiver, and between the primary transmitter and the secondary receiver is perfectly known. Besides, a suboptimal algorithm with less complexity is also proposed. In order to deal with more practical situations, we further assume that only the channel distribution information (CDI) of the interference links is available and propose heuristic power allocation algorithms based on bisection search method to minimize the aggregate BER under the interference outage constraint and the transmit power constraint. Simulation results are presented to verify the effectiveness of the proposed algorithms.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.98-99
• /
• 2016

Oyster shell is light weighted and its strength characteristic is similar to sand so we have reviewed to find its suitability of aggregate. Therefore we found fineness modulus and size distribution of oyster shell by grinding it with inverter cutter mill varying inverter speed and screening size. In our test, the fineness modulus has tendency of decrease in higher speed and tendency of increase in bigger diameter of screening size. 5~2.5mm, 2.5~1.2mm, 1.2~0.6mm, and below 0.6mm of oyster shell particle size could be used in further test for suitability of aggregate.

• 산업경영시스템학회지
• /
• 제13권21호
• /
• pp.101-110
• /
• 1990

This study presents a two-level inventory distribution system with one-upper level facility(warehouse) in first echelon and n-lower level facilities(stores) in the second echelon. The demand process at the upper level is induced by the aggregated backorder processes of n independently operated lower level facilities in parallel. For the upper level and the lower level we find the decision points and the distribution function of the aggregate backorders from n-stores. Optimal allocation units and expected system profits are obtained. If the product is of great enough importance to the customer, echelon structure will include a shadow installation. Also, this case is analyzed. Numerical examples are presented to illustrate the results for each case.

• 한국재난정보학회 논문집
• /
• 제6권1호
• /
• pp.78-90
• /
• 2010

Exposure to the outside, the concrete is differential moisture distribution depending on the depth. Such a differential moisture distribution causes the differential drying shrinkage in concrete structures. This thesis is researched to compare the shrinkage of lightweight concrete depending on depth to normal concrete. It is used artificial lightweight aggregate which has 20% of pre-absorb value by lightweight concrete. When water-binder ratio is 30%, average shrinkage of lightweight concrete section decreased than normal concrete, but differential shrinkage of lightweight concrete section increased. However water-binder ratio is 40% and 50% average shrinkage and differential shrinkage of lightweight concrete section decreased than normal concrete.

• 한국농공학회논문집
• /
• 제54권5호
• /
• pp.155-160
• /
• 2012

In this paper it was analyzed that the mechanical properties, the permeability and the freezing properties of SB-2 materials which are mainly used with the subbase materials. To this ends, a series of the physical test, the permeability test and the freezing test were carried out the samples mixed the small aggregate and the big aggregate from which was re-classified the SB-2. From the test results, it was analyzed the characteristics of permeability and the characteristics of freezing of the samples. And it was reviewed for SB-2 materials that the use of possibility for the freezing prevention layer material.