• 대한건축학회논문집:구조계
• /
• 제34권10호
• /
• pp.11-18
• /
• 2018

In this study, the cross-sectional image has been acquired to evaluate the aggregate distribution affecting quality of lightweight aggregate concrete, and through the binarization method, the study is to calculate the aggregate area of upper and lower sections to develop the method to assess the aggregate distribution of concrete. The acquisition of cross-section image of concrete for the above was available from the cross-sectional photography of cleavage tension of a normal test specimen, and an easily accessible and convenient image analysis software was used for image analysis. As a result, through such image analyses, the proportion of aggregate distribution of upper and lower sections of the test specien could be calculated, and the proportion of aggregate area U/L value of the upper and lower regions of concrete cross-section was calculated, revealing that it could be used as the comprehensive index of aggregate distribution. Moreover, through such method, relatively easy image acquisition methods and analytic methods have been proposed, and this indicated that the development of modeling to assess aggregate distribution quantitatively is available. Based on these methods, it is expected that the extraction of fundamental data to reconsider the connectivity with processes in concrete will be available through quality assessment of quantitative concrete.

• 농촌계획
• /
• 제11권4호
• /
• pp.93-98
• /
• 2005

A aggregate size distribution of soils is an important in successful crop production in reclaimed tidelands. The aggregate size distribution for this study were determined of 0.1mm, 0.25mm, 0.5mm, 1.0mm, and 2.0mm by wet sieving method. Agricultural activity, period of reclamation showed significant effects on aggregate size distribution in reclaimed tidelands. Aggregate MWD was greater in SS and KH(above 1.0m) than in YSG, GHD, SMG, and DH(below 0.5mm) reclaimed tidelands and tidelands. The percentage of aggregates less than < 2mm for SMG, GHD, and SM reclaimed tidelands and tidelands were ranged 8.9%, 36.7%, and 38.0%, respectively. The percentage of > 0.1mm aggregates for SMG, GHD, and SM reclaimed tidelands were ranged 9.0%, 26.0%, and 48.9%, respectively. Results indicated that aggregate size distribution of reclaimed tidelands and tidelands under various agricultural systems vary with reclamation period and soil type.

• 드라이브 ㆍ 컨트롤
• /
• 제19권3호
• /
• pp.16-22
• /
• 2022

Crushers are equipment that crush natural stones, to produce aggregates used at construction sites. As the crusher proceeds, the inner liner becomes worn, causing the size of the aggregate produced to gradually increase. The vision sensor-based aggregate analysis system analyzes the size and distribution of aggregates in production, in real time through image analysis. This study developed an algorithm that can segmentate aggregates in images in real time. using image preprocessing technology combining various filters and morphology techniques, and aggregate region characteristics such as convex hull and concave hull. We applied the developed algorithm to fine aggregate, intermediate aggregate, and thick aggregate images to verify their performance.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.153-156
• /
• 2006

This study investigated influence of kind of fine aggregate on fundamental properties of concrete. For the properties of fluidity with various type of fine aggregate, lime stone crushed fine aggregate(Ls) exhibited favorable result, due to grain shape and particle distribution, and next was granite crushed fine aggregate(Gs), natural fine aggregate(Ns). Ns had the highest value of air content while Ls had the lowest, due to the effective filling performance by continuos particle distribution. Ls, Ns, Gs in an order had higher bleeding capacity and faster setting time. However, compressive and tensile strength value exhibited similar tendency, regardless of aggregate type.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.219-224
• /
• 2005

A aggregate size distribution is an important in successful crop production in reclaimed tidelands. The aggregate size distribution for this study were determined of 0.1mm, 0.5mm, 1.0mm, and 2.0mm by wet sieving method. Agricultural activity, period of reclamation showed significant effects on aggregate size distribution in reclaimed tidelands. The percentage of <2mm aggregates for SMG, GHD, and SM reclaimed tidelands were ranged 8.9, 36.7, and 38.0%, respectively. The percentage of >0.1mm aggregates for SMG, GHD, and SM reclaimed tidelands were ranged 9.0, 26.0, and 48.9%, respectively.

• 자원환경지질
• /
• 제54권5호
• /
• pp.515-533
• /
• 2021

골재의 생산과 공급에 대한 공간정보를 기반으로 교통 네트워크를 이용하여 골재 공급 운반거리분석, 골재 공급지역 분석, 골재 공급의 위치-할당 시나리오 분석을 수행하였으며, 골재 수급 특성과 골재 유통현황을 해석하였다. 그 결과 골재 공급 기업을 중심으로 골재의 평균 운반거리가 평균 6 km이며, 모래의 경우 평균 7 km 자갈의 경우 평균 10 km 범위에서 수요지에 도달하는것으로나타났다. 특히서비스지역분석결과수도권은약 92%, 부산과울산, 경남 85%, 대전, 세종과충남이 90% 이상으로나타났다. 이러한 결과는 골재의 수요-공급에 대한 기초자료를 정량적으로 해석하는데 중요한 의미가 있으며, 골재 기본계획 수립에 필요한 골재 공급지역에 대한 광역적이고 정량적인 분석의 가능성을 제시한다. 입지-배분 시나리오에 의해 평가된 결과는 전국을 현재 골재를 소규모로 공급하는 700 여개의 기업들 보다 적은 200 개 미만의 대규모 채석량을 가진 기업을 통해 서비스 공급의 가능성을 보여준다. 따라서 골재의 유통 측면에서 골재 공급 서비스의 밀도가 높은 지역과 낮은 지역은 적절한 시장형성을 위한 정책적인 접근이 필요하고, 전국의 골재 수급 분석을 통해 지역적 배분 및 재평가의 필요성을 제안하였다. 더 나아가 골재 시장에 대한 수요-공급 네트워크 분석은 골재 산업뿐 아니라 관련 산업에 대한 중장기 정책 수립을 위한 추가적인 연구가 진행될 필요가 있다.

• 자원환경지질
• /
• 제54권5호
• /
• pp.595-603
• /
• 2021

하천 및 육상 골재 자원의 주 대상인 모래층의 분포는 제4기 퇴적 환경 중 충적 및 하천 퇴적환경에 주로 속한다. 충청남도 금산군 일대의 골재 자원 분포는 특징적으로 감입곡류 하천이 우세한 퇴적 환경 중심으로 발달하고 있는 반면, 붕적이나 선상지성 퇴적환경에서 형성된 퇴적층은 육상 및 하천 골재 분포 비율이 상대적으로 낮다. 봉황천 주변과 소하천들이 합류하는 부근 일대는 소규모이지만 하천의 범람원이 발달하며 골재 분포 지역에 해당된다. 금산군 제4기 퇴적층의 수직 분포는 약 5~12m 범위와 평균 8m의 제4기 퇴적층 두께를 갖는다. 골재 부존 구간은 평균 3.6m 두께이며 평균 입도는 점토-실트 약 21%, 모래 67%, 그리고 자갈 12%이다. 골재 부존 구간의 주요 특징은 조립질 모래가 우세하고 자갈은 아각형 또는 아원형, 분급은 일반적으로 불량하고 괴상의 형태를 띠며 암회색~황갈색 범위의 토색을 보인다. 금산군 내에서 골재 개발 가능성이 큰 분포 지역은 금강본류, 봉황천과 소하천 지류의 현 하상과 구하상을 따라 분포하는 충적 퇴적층 및 하천 퇴적층이다.

• Computers and Concrete
• /
• 제26권6호
• /
• pp.505-513
• /
• 2020

Grading of aggregate influences significantly almost all of the concrete performances. The purpose of this paper is to propose practicable equations that express the optimized total aggregate gradation, by weight or by number of particles in a concrete mix. The principle is based on the fractal feature of the grading of combined aggregate in a solid skeleton of concrete. Therefore, equations are derived based on the so-called fractal dimension of the grain size distribution of aggregates. Obtained model was then applied in such a way a correlation between some properties of the dry concrete mix and the fractal dimension of the aggregate gradation has been built. This demonstrates that the parameter fractal dimension is an efficacious tool to establish a unified model to study the solid phase of concrete in order to design aggregate gradation to meet certain requirements or even to predict some characteristics of the dry concrete mixture.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.85-88
• /
• 2006

This study investigated influence of fine aggregate types on fundamental properties of cement mortar. Test showed that concrete using lime stone crushed fine aggregate(L) exhibited the most favorable fluidity due to grain shape and particle distribution, and next was blending aggregate miting L and G, blending aggregate mixing L and N, granite crushed fine aggregate(G), natural fine aggregate(N) in an order. Concrete using N had the highest air content and L was the smallest value because of the effective filling performance by continuos particle distribution. Compressive, tensile and flexural strength of all concrete using L had the highest value due to the smallest value of air content. It is also found that concrete using L resulted in decrease of drying shrinkage length change ratio.

• Computers and Concrete
• /
• 제8권2호
• /
• pp.163-176
• /
• 2011

By virtue of chord-length density function from the field of statistical physics, this paper introduced a quantitative approach to estimate the distribution of cement paste thickness between aggregates in concrete. Dynamics mixing method based on molecular dynamics was employed to generate one model structure, then image analysis algorithm was used to obtain the distribution of thickness of cement paste in model structure for the purpose of verification. By comparison of probability density curves and cumulative probability curves of the cement paste thickness among neighboring aggregates, it is found that the theoretical results are consistent with the simulation. Furthermore, for the model mortar and concrete mixtures with practical volume fraction of Fuller-type aggregate, this analytical formula was employed to predict the influence of aggregate volume fraction and aggregate fineness. And evolution of its mean values were also investigated with the variation of volume fraction of aggregate as well as the fineness of aggregates in model mortars and concretes.