• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.105-113
• /
• 2016

OBJECTIVES : This study is to develop the optimum mixing proportions for cement concrete pavement with using recycled aggregates. METHODS : The mixture varied recycled coarse aggregates content from 50 % to 100 % to replace the natural coarse aggregates by weight. Tests for fundamental properties as a cement concrete pavement were conducted before and after hardening of the concrete. RESULTS : It was found that the variation in the amount of the recycled aggregate affected the compressive and flexural strength development, as well as the chloride ion penetration resistance. As the amount of the recycled aggregate content increased the compressive and flexural strength and the resistance to chloride ion penetration decreased. However, the resistance to freeze-thaw reaction was affected significantly. In addition, the gradation of the aggregate became worse and hence so did the coarseness factor as the recycled aggregate amount increased. CONCLUSIONS : The fundamental properties of the concrete with recycled aggregate does not seem to be appropriate when the recycled aggregate quality is not guaranteed up to a some level and its replacement ratio is over 50%. The optimized gradation of the aggregates should also be sought when the recycled aggregate is used for the cement concrete pavement materials.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.549-554
• /
• 2001

The authors have proposed that waste glass, which is crushed to pieces, can be used as a concrete aggregate. At the present time, recycled-glass concrete is used for sidewalk concrete blocks and pavement as glass is ornamental. However, in cases where recycled-glass concrete is used for structural concrete, strength and durability are required as structural concrete is exposed to the weather. Glass that is used generally is a mixture of SiO$_2$, Na$_2$O and CaO. SiO$_2$is the most likely cause of alkali-aggregate reaction when waste glass was used for concrete aggregate. In this study, an alkali-aggregate reaction test that is one of the important tests related to durability of aggregate was carried out far discussion of utilization of waste glass for concrete aggregate. From the results of the tests, it is found that glass is a reactive aggregate. The pessimum proportion of glass is about 75%. Then the cases of using fly ash, blast furnace slag and artificial zeolite for admixture materials were also examined for the purpose of prevention of alkali-aggregate reaction. from the results of the test, it was found that using them is an effective way to prevent alkali-aggregate reaction. The compressive strength in the cases of using admixture materials is larger than that without admixture materials.

• International Journal of Concrete Structures and Materials
• /
• v.8 no.4
• /
• pp.309-313
• /
• 2014

The volume fraction of the coarse aggregate in the conventional plastic concrete is controlled relatively low to ensure a required workability. In this paper, a new type of coarse aggregate interlocking concrete with strength ranging from C30 to C80 was prepared with scattering-filling aggregate process. The strength of concrete prepared with this method increases obviously whereas the shrinkage decreases significantly, the cement dosage in the concrete decreased 20 % at the same time. The microhardness of the ITZ between the cement paste and scattering-filling aggregate is higher than that of the original aggregate, the ITZ become narrower and tighter also. The interlocking and more even distribution of the coarse aggregate and the water absorption of the addition of extra amount of coarse aggregates contribute to the strength and performance improvement of the concrete prepared with scattering-filling aggregate process.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.1
• /
• pp.125-130
• /
• 2010

It is necessary to re-establish the code and to control the quality of the recycled aggregate itself for ensuring the useability of the recycled aggregate using waste concrete. Generally, adhering mortar cause of the water absorption ratio increment and strength decreased at the surface of the aggregate of the recycled aggregate using waste concrete, thus removing the adhering mortar could increase the useability of the recycled aggregate in the concrete industry. In this study, as a quality control method of the recycled aggregate using waste concrete, the quality characteristic of the recycled aggregate according to the mixing proportion between the recycled and the natural aggregate is obtained Therefore, a system is established to reuse the recycled aggregate in the construction industry.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.04a
• /
• pp.186-191
• /
• 1996

The recycled aggregate obtained from the recycled concrete may be used in road construction as crushed aggregate. The properties of recycled aggregate are reached to the values in accordance with specification for the subbase layer of the road construction. However, for the base layer of road construction, the mixtures of recycled aggregate and crushed aggregate have to be used in order to satisfy the specification. In the Batch Leaching Test the recycled aggregate has lower content of heavy matal and organic matter than those written in environmental pollution law. So it does not occur the environmental pollution.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.65-68
• /
• 1997

In this study, we investigate the difference between natural aggregate and electric arc furnace (EAF) slag one in order to use EAF slag aggregate as coarse aggregate in concrete. We find the physical and chemical properties of EAF slag aggregate according to the different aging processes. We consider the properties of the concrete made with EAF slag aggregate on these bases.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.332-333
• /
• 2018

The master plan for aggregate supply and demand aims to ensure the feasibility viability of mid/long-term aggregate supply and demand by establishing comprehensive plans for regional groups and aggregate types. In addition, It will propose ways to reduce the environmental impact of the development of aggregates and to stabilize aggregate supply and demand across the country. Also, it will seek to promote the stable development of the construction industry through policy and related amendments.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.132-133
• /
• 2015

In this research by examining the influence that low quality aggregate has on the strength of concrete through testing, the lowering of strength according to use of low quality coarse aggregate was reviewed. The results showed that when using low quality coarse aggregate, due to the quality of aggregate a high volume of units was required, and this caused the compression strength to be lowered. In conclusion it was confirmed that if the low quality aggregate was used as is without mix correction this would lead to faulty construction and if the aggregate was corrected to about 60 kg/m3 mix correction, this would lead to an economically infeasible concrete mix.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.99-100
• /
• 2012

Aggregate thermal properties and cooling methods are most important to evaluate the residual mechanical properties of concrete. In this study, we evaluate the residual mechanical properties of concrete according to the aggregate type and cooling method. We use the normal weight aggregate and light weight aggregate which have different thermal properties. After heating to the target temperature, we evaluate the mechanical properties according to the slow and fast cooling condition. As a result, normal weight aggregate concrete has higher effectiveness of cooling conditions than light weight aggregate concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.111-117
• /
• 1995

The alkali-aggregate reaction is a reaction between the alkali metals in the pore water of a concrete and an unstable mineral of the aggregate. There are three types of alkali-aggregate reation which causes deterioration of concrete, such as alkali-silicate reation, alkali-carbonate reaction and alkali-silica reation. Deterioration due to alkali-silica reation is more comon than that due to either the alkali-silicate or alkali-carbonate reaction. The alkali-silica reation is a reaction between the hydroxyl ions in the pore water of a concrete and silica which exists in signigicant quantities in the aggregate. In this PAPER, Alkali-aggregate reactions of mortar made with various abroad aggregate were investigated using XRD, microscope, chemical and physical tests. In additions, the effects of the texture of aggregate, Na, K, CI ion concentrations added to the mortar, on these reactions were studied.