• Journal of Yeungnam Medical Science
• /
• v.4 no.2
• /
• pp.121-129
• /
• 1987

To evealuate the status of hepatitis B virus infection in the mothers and neonates and to determine the maternal-neonatal transmission of hepatitis B virus, 2,276 term pregnant women were screened for the presence of serum HBsAg, at the Department of Obstetrics and Gynecology, Yeungnam University Hospital, during the period of 18 months from Jan. 1986 to Jun. 1987, and the sera of sixty-six HBsAg carrier mothers and their neonates were tested for HBV markers and liver enzymes. The results were as follows : 1. The prevalence rate of asymptomatic HBsAg carrier in the term pregnant women was 4.7%(53/1,279). 2. Positive rates of HBsAg and anti-HBs 10 the sera of sixty-six neonates born to asymptomatic HBsAg carrier mothers were 12.1% and 9.1%, respectively. Transient elevation of SGOT(three to four times of upper normal limit) was detected in one of eight HBsAg-positive neonates and one of six anti-HBs positive neonates. 3. Positive rates of anti-HBc, HBeAg and anti-HBe to the sera of sixty-six asymptomatic HBsAg carrier term pregant women were 93.9%, 45.5% and 50%, respectively. The rates of transmission of maternal anti-HBc, HBeAg and anti-HBe to the neonates were 85.5%(53/62), 90%(27/30) and 87.9%(29/33). respectively. 4. Serum HBsAg was detected in four of thirty neonates born to HBeAg positive HBsAg carrier mother, three of thirty-three neonates born to anti-HBe positive HBsAg carrier mothers, and one of three neonates born to both HBeAg and anti-HBe negative HBsAg carrier mothers.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.33-36
• /
• 2003

AC and DC conductivity of the MWNT(Multi walled nanotubes)/polyurethane composites were investigated with respect to the various oxidative conditions, where these means acid concentration, treatment temperature, and treatment time. We suppose that the conditions of oxidation of the MWNTS have a certain influence on the degree of functionalization, damages, and dispersion of the MWNT themselves. Futhermore, the electrical properties of the resulting composites strongly depend on the oxidative conditions of MWNTS. The conductivity of the composites produced by using the optimal condition was measured as a function of frequency with volume content of MWNTS. These experimental results were analyzed using percolation theory Electromagnetic interference shielding effectiveness (SE) of the mixtures of polyurethane (PU), optimized MWNTs, and silver (Ag) is measured in the frequency range from 10 MHz to 6 ㎓ by using ASTM D4935-89. The measured SEs of the mixtures could be controlled from about 55 dB to 85 dB with the compositions of Ag/MWNT and compounding methods(C1, C2).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.322-322
• /
• 2013

최근 전자제품들의 소형화, 경량화, 다기능화가 활발히 진행됨에 따라, 고성능의 고출력용 인쇄회로기판(PCB)의 개발이 요구되고 있다. PCB는 전자제품의 각 부품을 전기적으로 연결하는 통로로서 전자제품의 소형화, 다기능화에 따라 고집적화가 요구되고 있다. 하지만 모든 전자장비의 고장의 85% 정도가 발열에 의한 것으로, PCB의 고집적화에 따른 발열문제가 매우 중요한 이슈가 되고 있다. 최근에는 이러한 문제점을 해결하기 위해 PCB의 방열층으로 양극 산화막을 금속 기판 위에 형성하고 이 절연층 위에 금속층을 회로로서 형성하는 방열 PCB 기판에 대한 연구가 활발히 진행되고 있다. 최근까지, 금속층 회로 형성을 위해 무전해 Ni 도금에 대한 연구가 활발히 이루어져 왔다. 하지만 주로 화학적, 전기화학적 관점에서 많은 연구자들에 의해 조사 연구되어 왔다. 본 실험에서는 anodized Al 절연층 위의 회로전극 부분으로 스크린 방법으로 Ag paste를 패턴 인쇄한 뒤, 무전해도금 방식으로 저렴한 Ni 전면 회로전극을 형성하여 전기전도도를 높이고, 저항을 낮출 수 있는 회로로서 기판의 손상을 최소화하고 선택적으로 Ag 패턴에만 Ni 전극회로를 형성시키는 것을 목표로 연구하였다. Ni-B 무전해 도금시 도금조의 온도는 $65^{\circ}C$, 무전해 도금액의 pH는 ~7 (중성)로 유지하였다. Al2O3 기판을 이용한 Ag Paste 패턴 위에 증착된 Ni-B 박막의 특성을 분석하기 위해 X-ray diffraction (XRD), AFM (Atomic Force Microscopy), SEM (Scanning Electron Microscope), XPS (X-ray Photoelectron Spectroscopy)을 이용하여 Ni-B 박막의 특성을 분석하였다.

• Journal of Life Science
• /
• v.12 no.4
• /
• pp.416-422
• /
• 2002

Bacillus ehimensis YJ-37 was observed as a potential biological agent to control the occurrence of diseases and plant growth.promoting rhizobacteria (PGPR). Population density of B. ehimensis YJ-37 were higher 1.2~2 times in main roots and lateral roots than from nonrhizosphere soil and persisted around 10$^4$g root on the watermelon and radish root system upto 30 days after growing in pot condition. As a PGPR, B. ehimensis YJ-37 enhanced plant growth of watermelon and radish by soil treatment. The leaf area, hypocotyl length, root length and dry weight of radish were about 85, 33, 23 and 89% more than that of untreated plant, respectively. In case of watermelon were about 63, 27, 25 and 69% more than that of untreated plant, respectively. Biocontrol of damping-off in watermelon and radish caused by Rhizoctonia solani AG-4 and Pythium ultimum were carried out in pots using 3. ehimensis YJ-37. The results showed that might contribute to it's suppression of damping-off disease in field plants.

• The Korean Journal of Nuclear Medicine
• /
• v.15 no.2
• /
• pp.59-66
• /
• 1981

Serum HBsAg and Anti-HBs obtained by radioimmunoassay were studied in 109 cases of various liver diseases who visited or were admitted to National Medical Center from December, 1980 to July, 1981. The results were as follows; 1) HBsAg was detected in 67.0% of total 109 cases; 71.9% of 32 cases with acute viral hepatitis, 71.4% of 14 cases with chronic hepatitis, 65.2% of 46 cases with liver cirrhosis and 58.8% of 17 cases with hepatoma. 2) Anti-HBs was detected in 32.1% of total 109 cases; 37.0% of 46 cases with liver cirrhosis, 29.4% of 17 cases with hepatoma, 28.6% of 14 cases with chronic hepatitis, 28.1% of 32 cases with acute viral hepatitis. 3) HBsAg or Anti-HBs, the markers of Hepatitis B virus was detected in 89.0% of total 109 cases; 93.6% of 32 cases with acute viral hepatitis, 89.1% of 46 cases with liver cirrhosis, 85.7% of 14 cases with chronic hepatitis and 82.4% of 17 cases with hepatoma, which strongly suggested that the various liver diseases were associated with hepatitis B virus infection.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.88-94
• /
• 2014

In this paper, Thermal Shock tests were performed varying the composition of the solder and ribbon thickness (A-type:0.2mm/60Sn40Pb, B-type:0.25mm/60Sn40Pb, C-type:0.2 /62Sn36Ag2Pb, D-type:0.25mm/62Sn36Ag2Pb) for evaluating the long-term reliability about Ribbon junction of Silicon solar cells. Thermal Shock test condition was performed during the 600cycles having $-40^{\circ}C{\sim}85^{\circ}C$ temperature range each 15 minutes; One cycle time was 30min. As a result, the initial efficiency of the A-type, B-type, and C, D-type were showed 15.0%, 15.4% and 15.8% respectively. After thermal shock test, the efficiency decreasing-rate of each type were as follow that A-type was 13.8%, B-Type was 15.4%. C-Type and D-Type was 15.3% and 16.2%, respectively. Also, degradation of surface changes and I-V characteristic curves were showed that the series resistance of the A, C-type was increased. Also, current lowering starting point of C-type shown 0.05volt[v] earlier than that of A-type. And B, D-type shown characteristics of composite lowering efficiency such as increase of series resistance, decrease of parallel resistance and cell damage. Therefore Initial solderability and efficiency of specimens using the solder with SnAgPb were superior. But, It has inferior the long-term reliability. The test was confirmed that as the ribbon thickness increases, long-term reliability of solar cell will decrease.

• Yonsei Medical Journal
• /
• v.59 no.9
• /
• pp.1072-1078
• /
• 2018

Purpose: The Korean society has moved rapidly toward becoming a multicultural society. This study aimed to estimate the seroprevalence of hepatitis viruses and investigate hepatitis B virus (HBV) genotypic diversity in female marriage immigrants. Materials and Methods: Screening program was conducted at support centers for multicultural families in 21 administrative districts in Korea between July 2011 and January 2017. A total of 963 female marriage immigrants were included in this study. Blood samples were tested for hepatitis viral markers and HBV genotype. Results: Subjects' median age was 33 years (20-40 years), and they originated from nine countries including Vietnam (n=422, 43.8%), China (n=311, 32.3%), the Philippines (n=85, 8.8%), Cambodia (n=58, 6.0%), and Japan (n=39, 4.0%). About 30% (n=288) of subjects required hepatitis A vaccination. HBsAg positive rate was 5.4% (n=52). Positive HBsAg results were the highest in subjects from Southeast Asia (6.6%, n=38). Anti-HBs positive rate was 60.4% (n=582). About 34% (n=329) of subjects who were negative for anti-HBs and HBsAg required HBV vaccinations. Genotypes B and C were found in 54.6% (n=12) and 45.4% (n=10) of the 22 subjects with HBV, in whom genotypes were tested. Eight (0.8%) subjects were positive for anti-HCV. Positive anti-HCV results were the highest in subjects from Central Asia (7.9%, n=3). Conclusion: Testing for hepatitis viral marker (hepatitis A virus IgG and HBsAg/anti-HBs) is needed for female marriage immigrants. Especially, HBV genotype B is different from genotype C of Koreans. Therefore, interest and attention to vaccination programs for female marriage immigrants are necessary for both clinicians and public health institutes.

• The Journal of Korean Academy of Prosthodontics
• /
• v.19 no.1
• /
• pp.17-27
• /
• 1981

This study was conducted to determine the chemical composition and the mechanical properties of four commercially available low gold-based crown and bridge alloy produced in Korea. Four dental casting gold-silver-palladium alloys, i.e., A, B, C and D (code of alloys) were selected for the evaluation of chemical composition, ultimate tensile strength, elongation. values and Vickers hardness. The chemical composition of test specimens was analyzed by both emission spectrography and wet gravitation method with a 1.5gm of low gold ingot. The tensile properties and Vickers hardness was determined with cast specimens treated in following three conditions; as-cast, softening heat treatment and hardening heat treatment. The tensile testing bars were cast in accordance with the model designed by Gettleman and Harrison (1969) which was modified from the A. D. A. Specification No. 14 for dental chromium-cobalt casting alloy. Nine tensile test specimens were made from a split silicone mold for each of the test alloys to the size of 2.5mm in diameter and a gauge length of 10mm. All four alloys were handled in accordance with conventional methods used in Type III gold alloys. Ultimate tensile strength and elongation were measured on an Instron Universal Tensile Testing Machine (Model 1125, Japan) operated at a crosshead rate of 0.1cm/min. Elongation values were measured using Digital Measuring Microscope (MS-152, FUSOH, Japan). Vickers hardness was determined with a Vickers Hardness Tester (Model VKH-l, Japan) at a 1.0kg load on a mounted tensile test specimen. The following results were obtained from this study; 1. All tested alloys were composed of Au, Ag, Pd, Cu, Zn and Fe in common. The composition rate of gold for all four alloys was found in the range of $42{\sim}47$ weight % as shown below. Alloy A; Au 45%, Ag 40.2%, Pd 5.76%, others 9.04%. Alloy B; Au 47.1%, Ag 29.03%, Pd 6.98%, others 16.92%. Alloy C; Au 45%, .Ag 26.9%, Pd 6.83%, others 21.07%. Alloy D; Au 41.8%, Ag 34.4%, Pd 6.95%, others 16.85%. 3. The ultimate tensile strength of the four alloys was in the range of $31{\sim}82kg/mm^2$. The test results were shown in the below order from the highest value; As-cast condition; D, B, C, A. Softening heat treament; B, C, D, A. Hardening heat treatment; D, B, C, A. 4. The test :results of the elongation rate for each alloy were in the range of $0.5{\sim}18%$. The test results were shown in the below order from the highest value; As-cast condition; A, D, B, C. Softening heat treatment; A, C, D, B. Hardening heat treatment; C, D, B, A. 5. Vickers hardness for each of the four alloys was in the range of $120{\sim}230$. The test results were shown in the below order from the highest value; As-cast condition; C, B, D, A Softening heat treatment; D, B, C, A. Hardening heat treatment; D, A, C, B. 6. There were no differences in the physical properties between as-cast condition and softening heat treatment.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1995.05a
• /
• pp.85-92
• /
• 1995

HTPB/AP/Al이 기본 조성인 ADP 302 혼합형 추진제를 대상으로 4종의 금속선(Ag, Cu, Al, Ni-Cr)을 삽입하여 금속선 직경(0.1mm~0.8mm)별로 압력에 따른 금속선과 인접한 추진제의 연소 속도($r_w)를 측정하여 금속선 삽입 추진제의 연소 속도 증가비($r_w$/$r_sb$)와 압력 지수( n )의 변화를 고찰한 결과 금속선 종류에 따른 연소 속도 증가비($r_w$/$r_sb$)는 Ag> Cu>Al>Ni-Cr선을 삽입한 추진제의 순으로 나타났고 금속선의 열확 산 계수의 크기순과 일치하였다. Buckingham $\pi$ 이론을 적용한 무차원 해석으로부터 실험식을 구하여, 이 실험식에 의해 계산된 ($r_w)와 실험으로부터 얻어진 ($r_w)를 서로 비교하여 본 결과 잘 부합됨을 알 수 있었다. 또한 금속선 수에 따른 추진제 그레인의 연소 면적을 해석적으로 계산하여,($r_w$/$r_sb$)가 2, 3, 4, 5 배로 증가함에 따른 시간에 따른 연소 면적 증가비의 변화를 금속선 수에 따라서 비교하여 본 결과 정상 상태에서의 그레인의 연소 면적의 증가비($A_b$/$A_0$)는 금속선에 인접한 추진제의 연소 속도 증가비($r_w$/$r_sb$)와 일치했으며, 정상 상태의 연소 면적 증가비는 삽입된 금속선의 수와는 무관하며 정상 상태에 도달하는 시간에만 영향을 주는 것으로 나타났다.

• Journal of the Korean Society of Radiology
• /
• v.13 no.7
• /
• pp.933-939
• /
• 2019

The purpose of this study is to provide basic clinical data by evaluating images, measuring absorbed dose and effective dose by using high resolution CT and low dose CT by using anthropomorphic chest phantom and glass dosimeter. Tissue dose was measured by inserting a glass dosimeter into the anthropomorphic chest phantom. A 64-slice CT system (SOMATOM Sensation 64, Siemens AG, Forchheim, Germany) and CARE Dose 4D were used, and the parameters of the high resolution CT were 120 kVp, Eff. Scan parameters of mAs 104, scan time 7.93 s, slice 1.0 mm (Acq. 64 × 0.6 mm), convolution kernel (B60f sharp) were used, and low dose CT was 120 kVp, Eff. mAs 15, scan time 7.41 s, slice 3.0 mm (Acq. 64 × 0.6 mm), scan of convolution kernel B50f medium sharp. CTDIvol was measured at 8.01 mGy for high resolution CT and 1.18 mGy for low dose CT. Low dose CT scans showed 85.49% less absorbed dose than high resolution CT scans.