• 분석과학
• /
• 제19권4호
• /
• pp.333-341
• /
• 2006

PVP-protected Ag, Pd and $Pt_{50}-Ru_{50}$ colloids were prepared independently by using ${\gamma}$-irradiation and electron beam (EB) at ambient temperature. UV-visible spectra of these colloids show the characteristic bands of surface resonance and give evidence for the formation of nanoparticles. Transmission electron microscopy (TEM) experiments were used to know the morphology of nanoparticles prepared by ${\gamma}$-irradiation and EB. The size of Ag, Pd, and $Pt_{50}-Ru_{50}$ nanoparticles prepared by ${\gamma}$-irradiation was ca. 13, 2-3, 15 nm, respectively. While, the size of Ag, Pd, and $Pt_{50}-Ru_{50}$ nanoparticles prepared by EB was ca. 10, 6, and 1-3 nm, respectively. Cyclic voltamograms (CV) were recorded for the Au electrodes immobilized with these nanoparticles. CVs indicated the modifications in the surface as a result of immobilization.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.853-859
• /
• 2019

A comprehensive study of photon interaction features has been made for some alloys containing Pd and Ag content to evaluate its possible use as alternative gamma radiations shielding material. The mass attenuation coefficient (${\mu}/{\rho}$) of the present alloys was measured at various photon energies between 81 keV-1333 keV utilizing HPGe detector. The measured ${\mu}/{\rho}$ values were compared to those of theoretical and computational (MCNPX code) results. The results exhibited that the ${\mu}/{\rho}$ values of the studied alloys are in the same line with results of WinXCOM software and MCNPX code results at all energies. Moreover, Pd75/Ag25 alloy sample has the maximum radiation protection efficiency (about 53% at 81 keV) and lowest half value layer, which shows that Pd75/Ag25 has superior gamma radiation shielding performance among the other compared alloys.

• 공업화학
• /
• 제25권4호
• /
• pp.425-429
• /
• 2014

호기성 벤질 알코올 산화반응용 상용촉매 개발을 위하여 팔라듐이 담지된 차콜 입자를 제조하였다. 특히 촉매의 팔라듐 분산도를 높이기 위해서 상온 이온성액체 중 하나인 [Hmim][$PF_6$]을 기능성 용매로 사용하여 입자를 합성하였다. 다양한 농도의 팔라듐을 함침하여 제조된 입자의 반응성을 측정한 결과 7.5 wt%의 촉매가 가장 우수한 반응 활성과 안정성을 나타내었다. 또한 조촉매로서 다양한 농도의 은입자를 합침하여 촉매를 제조하였다. 동일한 반응조건에서 팔라듐과 은의 질량 비율이 9 : 1인 촉매가 높은 금속 분산도로 인하여 가장 반응성이 우수하였다.

• 한국자기학회지
• /
• 제19권5호
• /
• pp.165-170
• /
• 2009

준안정 상태인 덩치 fcc Fe는 반강자성 상태가 기저 상태인 것으로 알려져 있고 적절한 fcc 금속 표면 위에 fcc Fe를 성장시킬 수 있음이 보고된 바 있다. 본 연구에서는 fcc 금속 (001) 표면 위의 Fe 원자층의 자성을 연구하기 위해 Cu(001), Rh(001), Pd(001), Ag(001) 표면 위의 Fe 단층의 자성을 제일원리계산 방법 중 자성 연구에 가장 적합한 총퍼텐셜선형보강평면파(fullpotential linearized augmented plane wave; FLAPW) 방법을 사용하여 연구하였다. 고려한 계 중에서 2차원 격자상수가 가장 작은 Cu(001) 표면과 가장 큰 Ag(001) 표면 위의 Fe 단층은 강자성이 비교적 큰 에너지 차이로 Fe-fcc 금속 층간 거리에 관계없이 안정적이었고, 중간 크기의 2차원 격자상수를 가진 Rh(001)과 Pd(001) 표면 위의 Fe 단층은 반강자성 상태가 안정적이었으나, 층간 거리가 커짐에 따라 강자성 상태가 안정적일 수도 있는 것으로 계산되었다. 계산된 자기모멘트는 1Fe/Cu(001), 1Fe/Rh(001), 1Fe/Pd(001), 1Fe/Ag(001)의 강자성 상태에서 2.811, 2.945, 2.987, 2.990 $_{{\mu}B}$이었고, 반강자성 상태에서는 2.624, 2.879, 2.922, 3.001 $_{{\mu}B}$이었다.

• 한국자기학회지
• /
• 제4권4호
• /
• pp.307-312
• /
• 1994

(Fe, Co)/(Pd, Pt, Cu, Ag)로 이루어진 금속 다층박막에 대한 자기광학 Kerr 효과(${\theta}_{k}$) 스펙트럼을 박막내에서 빛의 다중간섭 이론을 적용하여 계산하였고, 그 결과를 보고된 실험값과 비교하였다. Co/Pd 다층막의 경우, ${\theta}_{k}$ 스펙트럼의 조성에 따른 파장 의존성에 대한 계산값이 서로 잘 일치하였으며, Fe/Cu 및 Fe/Ag 다층막에 있어서는 Cu와 Ag의 광흡수단 영역에서 다층막 고유의 새로운 peak가 나타나는 실험현상을 계산결과로 설명이 가능하였다. 그러나 Co/Pt 다층막의 경우에는 실험으로 측정된 300 nm파장 영역에서의 거대한 자기 광학 효과를 다중간섭이론으로는 설명할 수 없었으며, 이는 Co 또는 Pt 고유의 광학정수가 다층막을 이루면서 변화되어 나타나는 현상으로 생각된다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2002년도 추계학술발표강연 및 논문개요집
• /
• pp.170-170
• /
• 2002

• The Journal of Advanced Prosthodontics
• /
• 제7권5호
• /
• pp.392-399
• /
• 2015

PURPOSE. The aim of this study was to evaluate the effect of metal primers on the bonding of dental alloys and veneer resin. Polyvinylpyrrolidone solution's tarnish effect on bonding strength was also investigated. MATERIALS AND METHODS. Disk-shape metal specimens (diameter 8 mm, thickness 1.5 mm) were made from 3 kinds of alloy (Co-Cr, Ti and Au-Ag-Pd alloy) and divided into 4 groups per each alloy. Half specimens (n=12 per group) in tarnished group were immersed into polyvinylpyrrolidone solution for 24 hours. In Co-Cr and Ti-alloy, Alloy Primer (MDP + VBATDT) and MAC-Bond II (MAC-10) were applied, while Alloy Primer and V-Primer (VBATDT) were applied to Au-Ag-Pd alloys. After surface treatment, veneering composite resin were applied and shear bond strength test were conducted. RESULTS. Alloy Primer showed higher shear bond strength than MAC-Bond II in Co-Cr alloys and Au-Ag-Pd alloy (P<.05). However, in Ti alloy, there was no significant difference between Alloy Primer and MAC-Bond II. Tarnished Co-Cr and Au-Ag-Pd alloy surfaces presented significantly decreased shear bond strength. CONCLUSION. Combined use of MDP and VBATDT were effective in bonding of the resin to Co-Cr and Au-Ag-Pd alloy. Tarnish using polyvinylpyrrolidone solution negatively affected on the bonding of veneer resin to Co-Cr and Au-Ag-Pd alloys.

• 대한치과보철학회지
• /
• 제33권4호
• /
• pp.645-661
• /
• 1995

As the mechanical property of composite resin improved, composite resin has been widely used esthetic dentistry. In the field of esthetic dentistry, the color of prosthetic material is very important. The purpose of this study was to evaluate the color difference of specimens, by the types of alloys and gold electrodeposit. Experimental groups were as follows : Group Prec : Au-Pt alloy with no gold coating and no resin veneer. Group Semi : Pd-Ag alloy with no gold coating and no resin veneer. Group BAse : Ni-Cr alloy with no gold coating and no resin veneer. Group Gsem : Pd-Ag alloy with no gold coating and no resin veneer. Group Gbas : Ni-Cr alloy with no gold coating and no resin veneer. Group PreR : Resin veneer on the Pd-Ag alloy without gold coating. Group SemR : Resin veneer on the Pd-Ag alloy without gold coating. Group GbsR : Resin veneer on the Ni-Cr alloy with gold coating Group BasR : Resin veneer on the Ni-Cr alloy without gold coating. In this study, colors of metal surfaces and veneered resins were evaluated by the CIE $L^{*}a^{*}b$ system. The results obtained were as follows : 1. different alloy types and gold coating make the $L^{*}a^{*}b$ system. 2. The ${\Delta}E^*$ab value between groups semi and Base was less than 1.5 and there was no $a^*$ and $b^*$ value difference between groups Gsem and Gbas 3. The values of $L^*$ and $a^*$ ain groups GsemR and GbasR were so similar that the ${\Delta}E^*$ab value was as small as 0.58. 4. In resin specimens with gold coated semiprecious or base alloys showed yellower and redder deviation than the resin specimens with precious alloy. 5. The ${\Delta}E^*$ab values between goups PreR-GsemR and groups PreR-GbasR were as small as 2.68 and 2.22 respectively.

• 분석과학
• /
• 제9권3호
• /
• pp.221-234
• /
• 1996

흔적량 금속이온인 Ag(I), Pd(II), Au(III) 및 Pt(IV)의 dibenzylammonium dibenzyldithiocarbamate(DBADBDC) 착물을 용매추출하기 위한 기초적인 연구를 수행하였다. 클로로포름으로 리간드 및 금속착물을 추출하기 위한 pH의 영향을 조사한 결과, DBADBDC는 pH 2~9에서 일정하게 추출되었으며 금속착물의 경우 Ag(I)는 산성용액에서, Pd(II) 는 pH 4 이상에서, Au(III)는 모든 pH 영역에서, Pt(IV)는 pH 3 이상에서 일정하게 추출되었다. 금속-DBDC 착물의 수용액과 용매간 분배 및 추출평형에서 분포비와 추출률은 Ag(I)의 경우 pH 0에서 log D=4.226 : E(%)=99.9%, Pd(II)는 pH 4~7에서 log D=1.804 ; E(%)=98.5%, Au(III)는 pH 2~10에서 log D=3.755: E(%)=99.9%, Pt(IV)는 pH 8에서 log D=0.165 : E(%)=57.2%의 최대값을 나타내었다. 몰비법으로 금속이온과 리간드가 착물을 형성할 때의 결합비를 조사해 보았다. Ag(I)는 1 : 1, Pd(II), Au(III) 및 Pt(IV)는 1 : 2의 착물을 형성하였으며, Au(III) 와 Pt(IV)는 착물내에 염화이온이 포함되어 있었다. 수용액에 염화이온이 존재할 때의 금속-클로로 착물의 추출반응을 규명할 수 있었으며, 각 금속이온을 착화제인 DBADBDC로보 추출할 때 각각의 추출반응과 상수식을 얻을 수 있었다.

• 센서학회지
• /
• 제21권3호
• /
• pp.167-171
• /
• 2012

Ag- and Pd-loaded $SnO_2$ nanowire network sensors were prepared by the growth of $SnO_2$ nanowires via thermal evaporation, the coating of slurry containing $SnO_2$ nanowires, and dropping of a droplet containing Ag or Pd nanoparticles, and subsequent heat treatment. All the pristine, Pd-loaded and Ag-loaded $SnO_2$ nanowire networks showed the selective detection of $C_2H_5OH$ with low cross-responses to CO, $H_2$, $C_3H_8$, and $NH_3$. However, the relative gas responses and gas selectivity depended closely on the catalyst loading. The loading of Pd enhanced the responses($R_a/R_g$: $R_a$: resistance in air, $R_g$: resistance in gas) to CO and $H_2$ significantly, while it slightly deteriorated the response to $C_2H_5OH$. In contrast, a 3.1-fold enhancement was observed in the response to 100 ppm $C_2H_5OH$ by loading of Ag onto $SnO_2$ nanowire networks. The role of Ag catalysts in the highly sensitive and selective detection of $C_2H_5OH$ is discussed.