• 대한본초학회지
• /
• 제26권1호
• /
• pp.13-19
• /
• 2011

Objective : This study was to compare antioxidant activity and HPLC pattern analysis from 4 species of changpo(ch$\={a}$ngp$\'{u}$). Methods : To compare the antioxidant activity and HPLC pattern analysis from the 4 species of changpo, we performed the in vitro anti-oxidative activity assays and HPLC analysis from 70% ethanol extracts of Acorus gramineus Sol. (=AG), A. tatarinowii Schott (=AT), A. calamus L. (=AC) and Anemone altaica Fisch. ex C.A.Mey (=AA) taken in the herbal medicine market of Korea. Results : AG has the most effective anti-oxidative activity among 4 species of changpo. As the HPLC pattern analysis, AT was detected the unknown peak at retention time 14.9 min whereas AG was not showed any peak at the same retention time. These results suggest that AG could be used rather than AT when it need to be prescribed as anti-oxidative medicine. Conclusions : This result can be used as the basic data contributing to the stability of AG according to an appropriate clinical application.

• Bulletin of the Korean Chemical Society
• /
• 제5권4호
• /
• pp.135-140
• /
• 1984

The reduction of vacuum-dehydrated $Na_xAg_{12-x}-A, 0 {\le} x {\le} 9.2$, and its reoxidation by O$_2$, have been studied by X-ray powder diffraction. Also, the structure of $Na_6Na_6-A$ treated with hydrogen at room temperature has been studied by single crystal methods in the cubic space group Pm3m at $24{\circ}C (a = 12.221(2) {\AA})$. The diffraction pattern of dehydrated Ag$_{12}$-A reduced by H$_2$ contains only the (111) and (200) reflections of silver metal, indicationg that the zeolite structure has been lost, but the zeolite's diffraction pattern and structural integrity can be fully restored by oxidation with O$_2$ at 100 or 200${\circ}C$. In contrast, the structures of $Na_xAg_{12-x}-A$, x = 4.5 and 9.2, were not destroyed by treatment with hydrogen. Dehydrated Na$_6Ag_6$-A treated with 50 Torr of hydrogen gas at 24${\circ}C$ for 30 minutes has $6\; Na^+\;and\;1.27\;Ag^+$ ions at 6-ring sites. These $Ag^+ ions are associated with 2.54 Ag${\circ}$ atoms to form 1.27 $Ag_3^+$ clusters per unit cell. Also found were 0.7 $Ag_3^{2+}$ clusters per unit cell near the 8-rings. The structure was refined to the final error indices R$_1$ = 0.134 and R$_2$ (weighted) = 0.147, using 168 independent reflections for which $I_0 >3{\sigma}(I_0)$.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.136-138
• /
• 2006

Recently a lots of problems have observed in high densified and high integrated electronic components. One of them is ion migration phenomena, which induce the electrical short of electrical circuit. Ion migration phenomena has been observed in the field of exposing the specific environment and using for a long time. Also as the RoHS restriction was started in July 1st, 2006, Pb-free solder was utilized in electronics assemblies. In this case, it is very important to compatible between components and printed circuit board(PCB), thus surface treatment materials of PCB was changed to Sn, Sn-3.0Ag-0.5Cu, Cu. Therefore these new application become to need to reevaluate the sensitivity about electrochemical ion migration. This study was evaluated the occurrence time of electrochemical ion migration using by water drop test. We utilized PCB(printed circuit board) having a comb pattern as follows 0.1, 0.318, 0.5, 1.0 mm pattern distance. Sn-3.0Ag-0.5Cu and Sn-37Pb were electroplated on the comb pattern. 6.5V and 15.0V were applied in the comb pattern and then we measured the electrical short time causing by occurring the ion migration. In these results, we evaluate the sensitivity and derived the prediction models of ion migration occurrence time depending on the pattern materials, applied voltage and pattern spacing of PCB conductor.

• 한국전기전자재료학회논문지
• /
• 제32권4호
• /
• pp.267-271
• /
• 2019

A shingled PV module is manufactured by dividing and bonding. In this method, the solar cell is divided by lasers and bonded using electrically conductive adhesives (ECAs). Consequently, the manufacturing cost increases because a process step is added. Therefore, we aim to reduce the production cost by reducing the amount of Ag paste used in the solar cell front. Various electrode structures were designed and simulated. The number of fingers was optimized by designing thinner fingers, and the number of fingers with the maximum power conversion efficiency was confirmed. The simulation confirmed the maximum efficiency in the 4-divided electrode pattern. The amount of Ag paste used for each electrode pattern was calculated and analyzed. The number of fingers was optimized by decreasing the width of the finger; this will not only reduce the amount of Ag paste required but also the increase the efficiency.

• 한국인쇄학회지
• /
• 제30권2호
• /
• pp.59-68
• /
• 2012

As one of the eletronic device industries has been developed by using a recent printing method, the consumption of Ag paste has been on the rise as well. The printing method has simple processes in comparison with other methods. Also it enables to be large-scaled and to lower price ranges. If UV curing system would be applied to the printing method, energy consumption and dangerousness from curing system can be minimized in a short period of time so that its method can be more eco-friendly. This study conducted an experiment in order to make UV curing Ag paste which is feasible to implement micro patterns with different dispersing agents. The purpose of the study is to analysis the suitable printability for micro pattern and to test dispersibility, hardening properties, conductivity and adhesive stength by measuring viscosity, TI(thixotropy index), G', G", $tan{\delta}$(G"/G') after making paste. We have experimented with four dispersing agents. After We did an analysis of characteristic of rheology, conductivity and adhesive stength, etc, We confirmed that the paste added FP 3060 has excellent dispersibility, conductivity and adhesive stength. If the paste has excellent dispersibility, we will expect that micro pattern is made by that.

• 한국전기전자재료학회논문지
• /
• 제27권2호
• /
• pp.85-90
• /
• 2014

Ag paste has been used in the front electrode of the Si-solar cell. It is composed by Ag powder, glass frit, binder, solvent and dispersant. The role of the binder and the solvent is to make a flow and a printing property. However, it was not enough to report the printing properties with the variation of binder in the controled viscosity. In this study, we selected 3 kinds of typical binder which were used as binder for the paste in the industry, such as Ethyl cellulose, Hydroxypropyl cellulose and Acrylic. Ag pastes using these were prepared, controled viscosity and printed on the SiNx coated Si wafer. In the 'A paste' used Acrylic binder, printed hight was highest and 'H paste' used Hydroxypropyl cellulose binder was lowest. Because 'H paste' was high viscosity due to the molecular weight, the solvent was added in the paste to control the viscosity. Therefore, the content of solid was lower in 'H paste'. The relative pattern width which is related to the spreading of paste was the best in the case of 'H paste' and 'EH paste' at $30^{\circ}C$. It is thought that the optimization of the relative pattern width is possible for a paste by the controling shear thinning phenomenon. In the case of 'A paste', though printing hight was best, the pattern width was dependant on the temperature.

• Archives of Pharmacal Research
• /
• 제21권5호
• /
• pp.543-548
• /
• 1998

We examined the immunological properties of the recombinant hepatitis B surface antigen (r-HBsAg) which was expressed in mammalian cell (C127). The cross-immunity of r-HBsAg and plasma-derived hepatitis B surface antigen (p-HBsAg) were tested using Western blotting and ELISA with guinea pig polyclonal antibody and naturally infected human-derived antibody and the both antigens show the same results in their response pattern and intensity, which indicate they have a good cross-immunity. from the measurement of $ED_{50}$ after formalin- or heat-inactivation, both r-HBsAg and p-HBsAg and p-HBsAg showed $ED_{50}$ of 0.2-0.3 in formalin-inactivaton, while r-HBsAg was 0.05-0.09 and p-HBsAg was 0.03-0.07 in heat-inactivation, which means heat-inactivation method is 3-4 times superior in immunogenicity. In the immunopersistency test performed in guinea pig for the period of 3 months with two different adjuvants, antibody titer was 34.2 with muramyl dipeptide adjuvant, which was 1.8 times greater than the antibody titer of 18.9 with $AIPO_{4}$ adjuvant. the mutagenicity of r-HBsAg has the same cross-immunity with p-HBsAg, and heat-inactivation method and muramyl dipeptide adjuvant allow development of r-HBsAg vaccine with excellent immunogenicity.

• ETRI Journal
• /
• 제35권6호
• /
• pp.1011-1020
• /
• 2013

In this paper, we present a method for obtaining a high-quality 3D depth. The advantages of active pattern projection and passive stereo matching are combined and a system is established. A diffractive optical element (DOE) is developed to project the active pattern. Cross guidance (CG) and auto guidance (AG) are proposed to perform the passive stereo matching in a stereo image in which a DOE pattern is projected. When obtaining the image, the CG emits a DOE pattern periodically and consecutively receives the original and pattern images. In addition, stereo matching is performed using these images. The AG projects the DOE pattern continuously. It conducts cost aggregation, and the image is restored through the process of removing the pattern from the pattern image. The ground truth is generated to estimate the optimal parameter among various stereo matching algorithms. Using the ground truth, the optimal parameter is estimated and the cost computation and aggregation algorithm are selected. The depth is calculated and bad-pixel errors make up 4.45% of the non-occlusion area.

• 한국정밀공학회지
• /
• 제27권9호
• /
• pp.11-15
• /
• 2010

In this study, to fabricate a low-resistance and high optical transparency electrode film, the following steps were performed: the design and manufacture of electroforming stamp, the fabrication of a thermal roll-imprinted polycarbonate (PC) patterned films, the filled low-resistance Ag paste using doctor blade process on patterned PC films and spin coating by conductive polymers. As a result of PC films imprinted line width of $26.69{\pm}2\;{\mu}m$, channel length of $247.57{\pm}2\;{\mu}m$, and pattern depth of $7.54{\pm}0.2\;{\mu}m$. Ag paste to fill part of the patterned film with conductive polymer coating and then the following parameters were obtained: a sheet resistance of $11.1\;{\Omega}/sq$ optical transparency values at a wavelength of 550 nm was 80.31 %.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.694-698
• /
• 1987

In this paper, the primitive and double combined motion classification of the arm is discussed using pattern recognition of EM signal. The EM signals are detected from Ag-Ag/Cl surface electrodes, and IBM PC, calculated the Likelyhood probability and the decision function on the feature space of integral absolute value. Multiclass decision rule is introduced for higher decision rate. On our experimental results from expert simulator, the decision rate of more than 78% can be obtained.