• Korean Journal of Environmental Biology
• /
• v.39 no.4
• /
• pp.550-558
• /
• 2021

In a radiotracer study, the bioaccumulation and efflux of metals in earthworms (Eisenia fetida) exposed to soil spiked with ZnO and Ag nanoparticles (AgNP) were compared to those exposed to soil spiked with ionic Zn and Ag. Additionally, the bioavailability and chemical mobility of nano- and ionic metals in the soil were estimated using the sequential extraction method and compared to the bioaccumulation factor(BAF). The BAF for ZnO (0.06) was 31 times lower than that for Zn ions (1.86), suggesting that ZnO was less bioavailable than the ionic form in contaminated soil. In contrast, the BAFs for two types of AgNPs coated with polyvinylpyrrolidone (0.12) or citrate (0.11) were comparable to those of ionic Ag (0.17). The sequential extraction of metals from the soil suggests that the chemically mobile fractions in the Zn ion treatment were higher(35%) than those (<20%) in the Ag ion treatment, which was consistent with the greater BAFs in the former than the latter. However, the chemical mobility in the ZnO treatments did not predict bioavailability. The efflux rates of Ag (3.2-3.8% d^-1) in the worms were 2-3×those(1.2-1.7% d^-1) for Zn.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.5
• /
• pp.262-264
• /
• 2014

Pristine ZnO, 3 wt.% Ga-doped (3GZO) and 3 wt.% Ag-doped (3SZO) ZnO nanowires (NWs) were grown using the hot-walled pulse laser deposition (HW-PLD) technique. The doping of Ga and Ag in ZnO NWs was observed by analyzing the optical and chemical properties. We optimized the synthesis conditions, including processing temperature, time, gas flow, and distance between target and substrate for the growth of pristine and doped ZnO NWs. The diameter and length of pristine and doped ZnO NWs were controlled under 200 nm and several ${\mu}m$, respectively. Low temperature photoluminescence (PL) was performed to observe the optical property of doped NWs. We clearly observed the shift of the near band edge (NBE) emission by using low temperature PL. In the case of 3GZO and 3SZO NWs, the center photon energy of the NBE emissions shifted to low energy direction using the Burstein Moss effect. A strong donor-bound exciton peak was found in 3 GZO NWs, while an acceptor-bound exciton peak was found in 3SZO NWs. X-ray photoelectron spectroscopy (XPS) also indicated that the shift of binding energy was mainly attributed to the interaction between the metal ion and ZnO NWs.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.9
• /
• pp.798-801
• /
• 2007

Multilayer transparent electrodes, having a much lower electrical resistance than the widely used transparent conducting oxide electrodes, were prepared by using radio frequency magnetron sputtering. The multilayer structure consisted of five layers, indium tin oxided (ITO)/zinc oxide (ZnO)/Ag/zinc oxide (ZnO)/ITO. With about 50 nm thick ITO films, the multilayer showed a high optical transmittance in the visible range of the spectrum and had color neutrality. The electrical and optical properties of ITO/ZnO/Ag/ZnO/ITO multilayer were changed mainly by Ag film properties, which were affected by the deposition process of the upper layer. Especially ZnO layer was improved to adhesion of Ag and ITO. A high quality transparent electrode, having a resistance as low as and a high optical transmittance of 91% at 550 nm, was obtained. It could satisfy the requirement for the flexible OLED and LCD.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.1
• /
• pp.52-57
• /
• 2008

In the present study, impedance characteristics for AgO-Zn cell at various State-of-Charge (SoC) has been studied. The impedance measurements of AgO-Zn cell at various SoC were made over the frequency range from 100kHz to 10mHz with an amplitude 5mV. The impedance parameters have been evaluated by the analysis of the data using an equivalent circuit and a Non-linear least squares (NLLS) fitting method. The total resistances reflects the SoC of the cell. This indicates that the total resistance is important parameter for predicting SoC of AgO-Zn cell.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.393-393
• /
• 2012

본 연구에서는 고결정성을 갖는 ZnO 박막을 제작 후, 큰 일함수를 갖는 AgxO/Ag접촉을 통하여 ZnO 쇼트키 접촉 특성을 분석하였다. ZnO 박막은 사파이어 기판 위에 r.f. 마그네트론 스퍼터링법으로 $400{\sim}600^{\circ}C$의 온도구간에서 Ar과 $O_2$가스의 분압비를 달리하여 성장하였다. 이 때 성장온도 $600^{\circ}C$, 가스 분압비는 Ar : $O_2$ = 15 sccm : 30 sccm 에서 성장된 박막에서 양질의 고결정성 ZnO 박막을 확인하였다. 이 후 성장된 박막에 접촉 면적을 달리하여 dc 마그네트론 스퍼터링법과 lift-off photolithography법으로 AgxO/Ag접촉을 제작하고 쇼트키 접촉특성을 확인하였다. 전류-전압 특성을 확인한 결과 모든 시료에서 정류 특성을 확인하였으며, 접촉면적의 변화에도 쇼트키 장벽의 높이는 일정한 반면 이상지수는 향상되는 경향을 나타내었다. 따라서 본 연구에서는 AgxO/Ag를 이용한 ZnO 쇼트키 접촉면적에 따른 정류특성 및 장벽높이와 이상지수의 상관관계에 대하여 보고한다.

• Korean Journal of Materials Research
• /
• v.11 no.7
• /
• pp.603-608
• /
• 2001

$MO-SiO_2$ (M = Zn, Sn, In, Ag, Ni) binary silica gels were synthesized by sol-gel method and their structural change with the kind of metal ions was characterized by XRD, FT- IR and $^{29}$Si-NMR. Although X-ray analysis showed partial recrystallization of $AgNO_3$ in $Ag-SiO_2$gel, crystalline phase formed by the bonding between metal ion and the silica matrix didn't appear in all $MO-SiO_2$ gels. The FT-IR analysis showed that Zn, Sn and in partially formed Si-O-M bonding in silica matrix and made an shift of absorption peak to by Si-O-Si symmetrical vibration. In addition, $^{29}Si-NMR$ studies showed that Zn, Sn and In didn't affect sol-gel process of silica and were linked with non-bridging oxygen of the linear silica structure, which formed imperfect network because of low temperature sol-gel process. Ag and Ni make a role of catalysis on sol-gel process, resulting in densifying the silica network structure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.187-187
• /
• 2015

The past thirty years have seen increasingly rapid advances in the field of Indium Tin Oxide (ITO) transparent thin film.[1] However, a major problem with this ITO thin film application is high cost compared with other transparent thin film materials.[2] So far, in order to overcome this disadvantage, we show a transparent ITO/Ag/i-ZnO multilayer thin film electrode can be the solution. In comparison with using amount of ITO as a transparent conducting material, intrinsic-Zinc-Oxide (i-ZnO) based on ITO/Ag/i-ZnO multilayer thin film showed cost-effective and it has not only highly transparent but also conductive properties. The aim of this research has therefore been to try and establish how ITO/Ag/i-ZnO multilayer thin film would be more effective than ITO thin film. Herein, we report ITO/Ag/i-ZnO multilayer thin film properties by using optical spectroscopic method and measuring sheet resistance. At a certain total thickness of thin film, sheet resistance of ITO/Ag/i-ZnO multilayer was drastically decreased than ITO layer approximately $40{\Omega}/{\square}$ at same visible light transmittance.(minimal point $5.2{\Omega}/{\square}$). Tendency, which shows lowly sheet resistive in a certain transmittance, has been observed, hence, it should be suitable for transparent electrode device.

• Journal of the Korean Ceramic Society
• /
• v.38 no.3
• /
• pp.287-292
• /
• 2001

본 실험은 목적은 CRT(Cathode Ray Tube)용 청색 형광체인 ZnS:Ag 분말 표면에 액상법으로 SnO$_2$를 균일하게 코팅하는 공정조건을 연구하는 것이다. 용매로서 물을 사용하고, Sn의 공급물질로서 SnCl$_4$.4$H_2O$, 침전 촉매로서 CO(NH$_2$)$_2$를 각각 사용하여, 균일 침전 방법으로 ZnS:Ag 분말표면에 SnO$_2$를 코팅할 수 있었다. 초기에 첨가되는 SnCl$_4$.4$H_2O$의 량이 Sn/Zn의 몰비기준으로 0.017인 경우에 ZnS:Ag 분말표면에 Sn(OH)$_4$가 균일하게 코팅되지만, 그 이상 첨가되면 과량의 Sn(OH)$_4$가 입자들 사이에 응집되었다. 코팅된 Sn(OH)$_4$는 비정질 구조로 규명되었으며, 이를 SnO$_2$결정상으로 전이시키기 위하여 300~$700^{\circ}C$ 범위 내에서 열처리를 행하였다. 비정질 Sn(OH)$_4$는 20$0^{\circ}C$이하에서 탈수되었고 45$0^{\circ}C$부터 SnO$_2$로 결정화되기 시작하였다. 순수한 ZnS의 경우, 50$0^{\circ}C$이하에서는 상변화가 없으나, $600^{\circ}C$에서 일부 산화되었으며 $700^{\circ}C$에서는 완전히 ZnO로 산화되므로, ZnS의 산화방지 및 SnO$_2$의 결정화를 동시에 만족하는 최고 열처리온도는 50$0^{\circ}C$로 규명되었다. 그러나 ZnS에 SnO$_2$가 코팅된 시편의 경우에는 $600^{\circ}C$가 되어도 ZnS 상이 거의 산화되지 않았고, $700^{\circ}C$에서도 ZnS와 ZnO 상이 공존한 것으로 보아 SnO$_2$코팅이 ZnS의 산화를 억제하는 것으로 나타났다.

• Journal of the Korean Vacuum Society
• /
• v.21 no.4
• /
• pp.205-211
• /
• 2012

We investigated the optical and hydrophobic properties of the deposited silver (Ag) zinc oxide (ZnO) nanorods (NRs) on flexible indium tin oxide (ITO) coated polyethylene terephthalate (PET) substrates (i.e., ITO/PET). The ZnO NRs were grown by an electrochemical deposition using a sputtered ZnO seed layer and the Ag was deposited by using a thermal evaporator. For comparison, the same fabrication process was carried out on the bare ITO/PET without ZnO NRAs. Due to the discrete surface of ZnO NRs, the deposited Ag was formed as nano-scale particles, while the Ag became film-like for bare ITO/PET. In order to control the size and amount of Ag particles, the Ag deposition time was changed from 100 to 600 s. When the deposition time was increased, the Ag particles became larger and denser, and the absorptance was increased. This enhanced absorptance may be due to the localized surface plasmon resonance of Ag particles. Furthermore, the relatively high hydrophobicity was observed for the deposited Ag on the ZnO NRs/ITO/PET. These improved optical and surface properties are expected to be useful for flexible photovoltaic and optoelectronic devices.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.671-671
• /
• 2013

실리콘 태양전지와 박막형 태양전지의 뒤를 이어, 제3세대로 분류되는 양자점 감응형 태양전지(QDSC)에 대한 연구가 활발히 진행되고 있다. 이 태양전지의 TCO로는 주로 ZnO, TiO2가 대부분 사용되고 있으며, 양자점 물질로는 CdS, CdSe, CdTe, PbS, PbSe 등의 카드뮴 및 납을 주 성분으로 하는 물질들에 대한 연구만 중점적으로 이루어지고 있는 실정이다. 이런 물질들은 현재까지 알려진 한도 내에서는 QDSC 효율 중 가장 좋은 효율을 나타내고는 있으나 이런 타입의 QDSC가 상용화된다면 환경에 노출되었을 때에 미치는 악영향이 매우 큰 중금속 물질들로 이루어져 있어, 이를 극복할 수 있는 친환경 성분의 물질에 대한 연구 또한 필요한 시점이다. 따라서 본 연구에서는 CdS를 대체할 수 있는 물질로 Ag2S를 선정, 이에 대한 연구를 진행하였다. Ag2S는 밴드갭이 1.1eV의 물질로, CdS의 2.3 eV와 비교해 상당히 작은 밴드갭을 가져 월등히 넓은 영역에서 빛을 흡수할 수 있다는 장점을 가지고 있으며, 동시에 이로 인한 전자-정공 재결합이 빨라 태양전지로 제작시에 Voc가 낮게 형성된다는 단점도 가지고 있다. 태양전지에 사용된 TCO물질은 ZnO 나노선을 사용했으며, 본 연구실에서 기존에 개발한 수열합성법을 통해 제작하였다. 이를 활용하여 최종적으로 제작한 태양전지의 효율은 CdS/ZnO QDSC가 1.2%, Ag2S/ZnO QDSC가 1.2%로 동일한 성능을 나타냈으며, CdS를 대체할 물질로 Ag2S의 가능성을 보여준 결과라 할 수 있다.