• Progress in Superconductivity
• /
• 제8권1호
• /
• pp.71-74
• /
• 2006

High $J_c$ over 1 $MA/cm^2$ YBCO film has been successfully prepared using nitrate precursors by spray pyrolysis method. Aerosol drolpets generated using a concentric spray nozzle were directly sprayed on a $LaAlO_3$(100) single crystal substrate. The cation ratio of precursor solution was Y:Ba:Cu=1:2.65:1.35. The distance between nozzle and substrate was 15 cm. Deposition temperature was ranging from $750^{\circ}C\;to\;800^{\circ}C$. Deposition pressure was 100 Torr, and oxygen partial pressure was varied from 10 Torr to 50 Torr. The microstructure, phase formation, texture development and superconducting properties of deposited films were largely changed with oxygen partial pressure. Deposited films showed a texture with(001) planes parallel to substrate plane. High quality film was obtained when film was deposited at $760^{\circ}C$ with an oxygen partial pressure of 30 Torr. The critical current density($J_c$) of the YBCO film was 1.75 $MA/cm^2$ at 77 K and self-field.

• 전기화학회지
• /
• 제2권4호
• /
• pp.202-208
• /
• 1999

[ $50/50 vol\%$ ] LSM-YSZ의 양극은 콜로이드 증착법에 의해 YSZ 전해질상에 증착하였다. 양극 특성은 주사전자현미경과 임피던스 분석기에 의해 고찰하였다. LSM-YSZ양극의 제조 조건에 따른 영향을 관찰하였으며, 그 영향에 대한 개선책이 고체산화물 연료전지의 성능향상을 위해 제시되었다. 임피던스에 대한 온도, YSZ전해질로의 양극 접착에 대한 표면 오염, 사용하는 Pt 페이스트, 미세구조에 대한 곡표면에 가해진 연무질 분사기술과 셀과 셀의 변동성에 대한 영향들은 각각 $900^{\circ}C$ 측정, YSZ표면 연마, 일단의 Pt페이스트 사용, 평편한 YSZ판의 사용과 일관된 절차와 기술의 사용에 의해 해결되었다. 이때 재현성 있는 임피던스 스펙트럼들이 향상된 셀을 사용함으로써 얻어졌고, $900^{\circ}C$에서 (공기)LSM-YSZ/YSZ/LSM-YSZ(공기) 셀에 대해 측정된 전형적인 임피던스 스펙트럼들은 2개의 불완전한 호로 구성되었다. 또한 LSM-YSZ 양극의 임피던스 특성은 촉매층, 양극 조성, 인가 전류 등과 같은 실험 조건들에 의해서도 영향을 받았다.

• 한국환경과학회지
• /
• 제24권5호
• /
• pp.615-622
• /
• 2015

East Asia is characterized by anthropogenic emissions resulting from the large population and fast economic growth of this region. Since the prevailing wind is westerly and northwesterly, emissions from Ul-jin can be expected to contribute to acidic deposition increase in downwind direction. Aerosols collected at the near coast site, Uljin geun, gyungbook and were analyzed for $NH_4{^+}$, $Mg^{2+}$, $Na^+$, $Ca^{2+}$, $Cl^-$, $SO_4{^{2-}}$, and $NO_3{^-}$ from Aug. 2012 to Feb. 2013. The seasonal averaged aerosol concentration showed the highest potassium and calcium ion in winter and the highest ammonium ion due to a meadow and high solar intensity in summer. Sodium and chloride ion showed the same ratio all seasons and sulfate and nitrate species showed the maximum value in winter Chemical components of aerosols collected at the near coast site, Uljin geun, gyungbook were lower by 16 to 73% than those collected at other similar environment site such as kanghwa, yangyang. Comparing air quality data at the near coast site, Uljin geun, gyungbook, There was found that Uljin coast site is less influenced by the sea salts(potassium, magnesium, calcium) and nss-$SO_4{^{2-}}$ percentage is 3~13% higher than similar condition site.

• Bulletin of the Korean Chemical Society
• /
• 제27권10호
• /
• pp.1572-1576
• /
• 2006

A dimeric precursor, $[Cu(dmae)(OCOCH_3)(H_2O)]_2$ for the CVD of copper metal films, (dmaeH = N,N-dimethylaminoethanol) was synthesized by the reaction of copper(II) acetate monohydrate ($Cu(OCOCH_3)_2{\cdot}H_2O$) and dmaeH in toluene. The product was characterized by m.p. determination, elemental analysis and X-ray crystallography. Molecular structure of $[Cu(dmae)(OCOCH_3)(H_2O)]_2$ shows that a dimeric unit $[Cu(dmae)(OCOCH_3)(H_2O)]_2$ is linked to another through hydrogen bond and it undergoes facile decomposition at 300 C to deposit granular copper metal film under nitrogen atmosphere. The decomposition temperature, thermal behaviour, kinetic parameters, evolved gas pattern of the complex, morphology, and the composition of the film were also investigated.

• 대한기계학회논문집A
• /
• 제32권8호
• /
• pp.617-623
• /
• 2008

The membrane filter adhered with nanostructured porous layer was made by heat treatment after deposition of nanoparticle-agglomerates sintered in aerosol phase onto a conventional micron-fibrous metal filter as a substrate filter. The Sintered-Nanoparticle-Agglomerates-coated NanoStructured porous layer Membrane Filter (SNA-NSMF), whose the filtration performance was improved compared with the conventional metal membrane filters, was developed by adhesion of nanoparticle-agglomerates of dendrite structure sintered onto the micron-fibrous metal filter. The size of nanoparticle-agglomerates of dendrite structure decreased with increasing the sintering temperature because nanoparticle-agglomerates shrank. When shrinking nanoparticle-agglomerates were deposited and treated with heat onto the conventional micron-fibrous metal filter, pore size of nanostructured porous layer decreased. Therefore, pressure drops of SNA-NSMFs increased from 0.3 to 0.516 kPa and filtration efficiencies remarkably increased from 95.612 to 99.9993%.

• 한국대기환경학회지
• /
• 제25권6호
• /
• pp.539-549
• /
• 2009

The purpose of this study is to estimate hourly Asian dust emission flux in springtime by using the optimized Weather Research Forecasting model (WRF) in order to accurately predict the horizontal flux of Asian dusts. Asian dust emission flux using 5 empirical formulas such as US EPA, Park and Inn, Wang, The Goddard Chemistry Aerosol Radiation and Transport (GOCART) and Dust Entrainment and Deposition (DEAD) were calculated and compared by using classified land-use types and size distribution at various locations in China and Mongolia together with the hourly meteorological elements of the WRF model. As a result, the empirical formula in US EPA among them, which was considered the various conditions such as vegetation, soil type and terrain, was better than the other 4 empirical formulas. However, these formulas were adjusted hourly and vertically in time and space because there was different order and time resolution of dust emissions from original empirical formulas.

• 대한의용생체공학회:의공학회지
• /
• 제33권4호
• /
• pp.177-183
• /
• 2012

The inspiratory flow rate of a human is changed with the amount of the workload. The flow characteristic is affected by the inspiratory flow rate. In the flow field of airway, the both of turbulence intensity and secondary flow affect the deposition pattern of particles which is important for the drug-aerosol targeting. Thus the analysis of the flow characteristic in a human airway is important. The purpose of this study is to investigate the effects of the inspiratory flow rate on the flow characteristics in a human airway. The tubular airway is consistent with the oral cavity, pharynx, larynx and trachea. The relatively inspiratory flow rate is used at each case of human states regarding the workload. By the effect of geometric airway changes, transition to turbulent airflow after the larynx can occur with relaminarization further downstream. The low Reynolds number k-${\omega}$ turbulence model is used for analysis with flow regime. As the inspiratory flow rate is larger, the turbulence kinetic energy and secondary flow intensity increase in airway. On the other hand, the area of recirculation zone is smaller.

• Korean Chemical Engineering Research
• /
• 제46권2호
• /
• pp.397-401
• /
• 2008

레이저 애블레이션에 의해서 가지상 구조체 형상인 나노입자 응집체를 합성하였다. 기존 마이크론 금속섬유 필터의 표면상에 나노입자 응집체를 고착하여 여과성능을 향상시켰다. 에어로졸 상에서 소결 처리된 나노입자 응집체를 증착한 후 열처리를 하여 나노구조체가 표면상에 형성된 소결 처리된 나노입자 응집체 고착 필터를 제작하였다. 소결 온도가 증가할수록 마이크론 금속섬유 필터 표면상에 고착된 나노입자 응집체의 표면적 증가로 인하여 차압은 조금 증가하지만 여과효율은 현저하게 증가하였다.

• 한국재료학회지
• /
• 제31권10호
• /
• pp.546-551
• /
• 2021

To improve ferroelectric properties of PZT, many studies have attempted to fabricate dense PZT films. The AD process has an advantage for forming dense ceramic films at room temperature without any additional heat treatment in low vacuum. Thick films coated by AD have a higher dielectric breakdown strength due to their higher density than those coated using conventional methods. To improve the breakdown strength, glass (SiO₂-Al₂O₃-Y₂O₃, SAY) is mixed with PZT powder at various volume ratios (PZT-xSAY, x = 0, 5, 10 vol%) and coating films are produced on silicon wafers by AD method. Depending on the ratio of PZT to glass, dielectric breakdown strength and energy storage efficiency characteristics change. Mechanical impact in the AD process makes the SAY glass more viscous and fills the film densely. Compared to pure PZT film, PZT-SAY film shows an 87.5 % increase in breakdown strength and a 35.3 % increase in energy storage efficiency.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 추계학술대회 논문집
• /
• pp.400-401
• /
• 2003

Atmospheric fine aerosol particles play an important role in controlling a number of atmospheric processes, such as the deposition of different compounds, the optical properties etc. (Molnar et al., 1999). In this report, water-soluble species of PM$_{2.5}$ obtained from simultaneous measurements at four Asia sites (Beijng (39.56$^{\circ}$N, 116.17$^{\circ}$E), China; Gwangju (35.10$^{\circ}$N, 126.53$^{\circ}$E), South Korea; Kyoto (35.01$^{\circ}$N, 135.44$^{\circ}$E), Japan; and Ulan-Bator (47.55$^{\circ}$N, 106.52$^{\circ}$E), Mongolia) during the periods of 14-22 August, 30 October-06 November 2000, 14-21 January 2001, 23 July-02 August and 05-16 November 2002, within the framework of an APN (The Asia-Pacific Network for Global Change Research) project are reported. Ion components in 23 July-02 August 2002 were not obtained because of the technical problem of equipments.s.