• Journal of Environmental Science International
• /
• v.24 no.5
• /
• pp.615-622
• /
• 2015

East Asia is characterized by anthropogenic emissions resulting from the large population and fast economic growth of this region. Since the prevailing wind is westerly and northwesterly, emissions from Ul-jin can be expected to contribute to acidic deposition increase in downwind direction. Aerosols collected at the near coast site, Uljin geun, gyungbook and were analyzed for $NH_4{^+}$, $Mg^{2+}$, $Na^+$, $Ca^{2+}$, $Cl^-$, $SO_4{^{2-}}$, and $NO_3{^-}$ from Aug. 2012 to Feb. 2013. The seasonal averaged aerosol concentration showed the highest potassium and calcium ion in winter and the highest ammonium ion due to a meadow and high solar intensity in summer. Sodium and chloride ion showed the same ratio all seasons and sulfate and nitrate species showed the maximum value in winter Chemical components of aerosols collected at the near coast site, Uljin geun, gyungbook were lower by 16 to 73% than those collected at other similar environment site such as kanghwa, yangyang. Comparing air quality data at the near coast site, Uljin geun, gyungbook, There was found that Uljin coast site is less influenced by the sea salts(potassium, magnesium, calcium) and nss-$SO_4{^{2-}}$ percentage is 3~13% higher than similar condition site.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1572-1576
• /
• 2006

A dimeric precursor, $[Cu(dmae)(OCOCH_3)(H_2O)]_2$ for the CVD of copper metal films, (dmaeH = N,N-dimethylaminoethanol) was synthesized by the reaction of copper(II) acetate monohydrate ($Cu(OCOCH_3)_2{\cdot}H_2O$) and dmaeH in toluene. The product was characterized by m.p. determination, elemental analysis and X-ray crystallography. Molecular structure of $[Cu(dmae)(OCOCH_3)(H_2O)]_2$ shows that a dimeric unit $[Cu(dmae)(OCOCH_3)(H_2O)]_2$ is linked to another through hydrogen bond and it undergoes facile decomposition at 300 C to deposit granular copper metal film under nitrogen atmosphere. The decomposition temperature, thermal behaviour, kinetic parameters, evolved gas pattern of the complex, morphology, and the composition of the film were also investigated.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.8
• /
• pp.617-623
• /
• 2008

The membrane filter adhered with nanostructured porous layer was made by heat treatment after deposition of nanoparticle-agglomerates sintered in aerosol phase onto a conventional micron-fibrous metal filter as a substrate filter. The Sintered-Nanoparticle-Agglomerates-coated NanoStructured porous layer Membrane Filter (SNA-NSMF), whose the filtration performance was improved compared with the conventional metal membrane filters, was developed by adhesion of nanoparticle-agglomerates of dendrite structure sintered onto the micron-fibrous metal filter. The size of nanoparticle-agglomerates of dendrite structure decreased with increasing the sintering temperature because nanoparticle-agglomerates shrank. When shrinking nanoparticle-agglomerates were deposited and treated with heat onto the conventional micron-fibrous metal filter, pore size of nanostructured porous layer decreased. Therefore, pressure drops of SNA-NSMFs increased from 0.3 to 0.516 kPa and filtration efficiencies remarkably increased from 95.612 to 99.9993%.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.6
• /
• pp.539-549
• /
• 2009

The purpose of this study is to estimate hourly Asian dust emission flux in springtime by using the optimized Weather Research Forecasting model (WRF) in order to accurately predict the horizontal flux of Asian dusts. Asian dust emission flux using 5 empirical formulas such as US EPA, Park and Inn, Wang, The Goddard Chemistry Aerosol Radiation and Transport (GOCART) and Dust Entrainment and Deposition (DEAD) were calculated and compared by using classified land-use types and size distribution at various locations in China and Mongolia together with the hourly meteorological elements of the WRF model. As a result, the empirical formula in US EPA among them, which was considered the various conditions such as vegetation, soil type and terrain, was better than the other 4 empirical formulas. However, these formulas were adjusted hourly and vertically in time and space because there was different order and time resolution of dust emissions from original empirical formulas.

• Journal of Biomedical Engineering Research
• /
• v.33 no.4
• /
• pp.177-183
• /
• 2012

The inspiratory flow rate of a human is changed with the amount of the workload. The flow characteristic is affected by the inspiratory flow rate. In the flow field of airway, the both of turbulence intensity and secondary flow affect the deposition pattern of particles which is important for the drug-aerosol targeting. Thus the analysis of the flow characteristic in a human airway is important. The purpose of this study is to investigate the effects of the inspiratory flow rate on the flow characteristics in a human airway. The tubular airway is consistent with the oral cavity, pharynx, larynx and trachea. The relatively inspiratory flow rate is used at each case of human states regarding the workload. By the effect of geometric airway changes, transition to turbulent airflow after the larynx can occur with relaminarization further downstream. The low Reynolds number k-${\omega}$ turbulence model is used for analysis with flow regime. As the inspiratory flow rate is larger, the turbulence kinetic energy and secondary flow intensity increase in airway. On the other hand, the area of recirculation zone is smaller.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.397-401
• /
• 2008

The nanoparticle-agglomerates are synthesized by laser ablation, which have the morphology of dendrite structure. The filtration performance of a conventional micron-fibrous metal filter was improved by adhering nanoparticle-agglomerates onto the filter surface. The Sintered-Nanoparticle-Agglomerates-adhered Filter (SNAF) adhered with nanostructured material was made by heat treatment after deposition of nanoparticle-agglomerates sintered in aerosol phase onto the micron-fibrous metal filter. As the sintering temperature increases, the pressure drop of the filter increases a little but the filtration efficiency increases remarkably. This is due to increase of surface area of nanoparticle-agglomerates adhered onto the micron-fibrous metal filter.

• Korean Journal of Materials Research
• /
• v.31 no.10
• /
• pp.546-551
• /
• 2021

To improve ferroelectric properties of PZT, many studies have attempted to fabricate dense PZT films. The AD process has an advantage for forming dense ceramic films at room temperature without any additional heat treatment in low vacuum. Thick films coated by AD have a higher dielectric breakdown strength due to their higher density than those coated using conventional methods. To improve the breakdown strength, glass (SiO₂-Al₂O₃-Y₂O₃, SAY) is mixed with PZT powder at various volume ratios (PZT-xSAY, x = 0, 5, 10 vol%) and coating films are produced on silicon wafers by AD method. Depending on the ratio of PZT to glass, dielectric breakdown strength and energy storage efficiency characteristics change. Mechanical impact in the AD process makes the SAY glass more viscous and fills the film densely. Compared to pure PZT film, PZT-SAY film shows an 87.5 % increase in breakdown strength and a 35.3 % increase in energy storage efficiency.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.400-401
• /
• 2003

Atmospheric fine aerosol particles play an important role in controlling a number of atmospheric processes, such as the deposition of different compounds, the optical properties etc. (Molnar et al., 1999). In this report, water-soluble species of PM$_{2.5}$ obtained from simultaneous measurements at four Asia sites (Beijng (39.56$^{\circ}$N, 116.17$^{\circ}$E), China; Gwangju (35.10$^{\circ}$N, 126.53$^{\circ}$E), South Korea; Kyoto (35.01$^{\circ}$N, 135.44$^{\circ}$E), Japan; and Ulan-Bator (47.55$^{\circ}$N, 106.52$^{\circ}$E), Mongolia) during the periods of 14-22 August, 30 October-06 November 2000, 14-21 January 2001, 23 July-02 August and 05-16 November 2002, within the framework of an APN (The Asia-Pacific Network for Global Change Research) project are reported. Ion components in 23 July-02 August 2002 were not obtained because of the technical problem of equipments.s.

• Economic and Environmental Geology
• /
• v.38 no.4 s.173
• /
• pp.463-479
• /
• 2005

The Sr and Pb isotopic ratios and chemical composition were measured for atmospheric bulk deposition samples collected in the Jeonju, Gunsan and Namweon areas over a period of one year. Acidity of deposition ranged pH $4\~7$ with little higher in dry season, and around pH 5.0 in rainy season. The EC and TDS of rainy season was low showing dilution effect, and increased during dry season. Sulfate $(SO_4)\;and\;NO_3$ are atmospheric aerosols largely of anthropogenic origin in winter. Sodium was concentrated in winter deposition, Ca was concentrated in spring to summer deposition. Namweon has lower EC and TDS than those of other, and Jeonju has higher. Namweon was concentrated in $HCO_3$ and Cunsan was concentrated in Cl. Aluminium, Cu, and Zn show good correlation index with TDS, indicating of their origin atmospheric. $^{87}Sr/^{86}Sr$ ratios of bulk deposition ranged from 0.7109 to 0.7128. The isotopic variations are correlated with mixing of isotopic compositions of local soils, road deposit and biogenic aerosol. In order to constrain further the origin of aerosols in rainwater, it will be necessary to collect additional Sr isotopic data for aerosols. Lead isotope ratios for all areas were similar and belonged to Pb isotope ratios of Seoul's aerosols, but little different with Beijing's aerosols. It showing that Pb in the Korea mainly derived from the gasoline combustion, not exclusively from the Beijing.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.2
• /
• pp.197-205
• /
• 2003

A cascade impactor is a multistage impaction device used to separate airborne particles into aerodynamic size classes. A micro-orifice impactor uses micro-orifice nozzles to extend the cut sizes of the lower stages to as small as 0.05 ${\mu}{\textrm}{m}$ in diameter without resorting to low pressures or creating excessive pressure drops across the impactor stages. In this work, the phenomenon of particle clogging in micro-orifice nozzles was experimentally investigated for a commercial micro-orifice uniform deposit impactor (MOUDI). It was observed, using an optical microscope, that the micro-orifice nozzles of the final stages were partially clogged due to particle deposition during the aerosol sampling. Therefore the pressure drops across the nozzles were higher than the nominal values given by the manufacturer. To examine the effect of particle clogging in micro-orifice nozzles, the particle collection efficiency of the MOUDI was evaluated using an electrical method for fine particles with diameters in the range of 0.1-0.6 ${\mu}{\textrm}{m}$. The monodisperse liquid dioctyl sebacate (DOS) particles were used as test aerosols. A faraday cage was employed to measure the low-level current of the charged particles upstream and downstream of each stage. It was found that the collection efficiency curves shifted to correspond to smaller orifice sizes, and the 50-% cutoff sizes were much smaller than those given by the manufacturer for the three stages with nozzles less than 400 ${\mu}{\textrm}{m}$ in diameter.