• Journal of Korean Society for Atmospheric Environment
• /
• 제24권E1호
• /
• pp.32-43
• /
• 2008

Source samples were collected to construct source profiles for 9 different source types, including soil, road dust, gasoline/diesel-powered vehicles, a municipal incinerator, industrial sources, agricultural/biomass burning, marine aerosol, and a coal-fired power plant. Seasonal profiles for 'Chinese aerosol', aerosols derived from the urban area of China, were reconstructed from seasonal $PM_{2.5}$ compositions reported in Beijing, China. Ambient $PM_{2.5}$ at a receptor site was also measured during each of the four seasons, from April 2001 to February 2002, in Seoul. The Chemical Mass Balance receptor model was applied to quantify source contributions during the study period using the estimated source profiles. Consequently, motor vehicle exhaust (33.0%), in particular 23.9% for diesel-powered vehicles, was the largest contributor affecting the $PM_{2.5}$ levels in Seoul, followed by agricultural/biomass burning (21.5%) and 'Chinese aerosol' (13.1%), indicating contributions from long-range transport. The largest contributors by season were: for spring, 'Chinese aerosol' (31.7%); for summer, motor vehicle exhaust (66.9%); and for fall and winter, agricultural/biomass burning (31.1% and 40.1%, respectively). These results show different seasonal patterns and sources affecting the $PM_{2.5}$ level in Seoul, than those previously reported for other cities in the world.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.307-312
• /
• 1998

The paper first describes the atmospheric correction algorithm for the Ocean Color and Temperature Scanner (OCTS) visible band data used at Earth Observation Center (EOC) of National Space Development Agency of Japan (NASDA). It uses 10 candidate aerosol models including "Asian dust model" introduced in consideration of the unique feature of aerosols over the east Asian waters. Based on the observations at 670 and 865 nm bands where the reflectance of the water body can be discarded, the algorithm selects a pair of aerosol models that accounts best for the observed spectral reflectances to synthesize the aerosol reflectance in other bands. The paper also evaluates the performance of the algorithm by comparing the satellite estimates of water-leaving radiance and chlorophyll-a concentration with selected buoy-and ship-measured data. In comparison with the old CZCS-type atmospheric correction algorithm where the aerosol reflectance is as-sumed to be spectrally independent, the OCTS algorithm records factor 2-3 less error in estimating the normalized water-leaving radiances. In terms of chlorophyll-a concentration estimation, however, the accuracy stays vey similar compared to that of the CZCS-type algorithm. This is considered to be due to the nature of in-water algorithm which relies on spectral ratio of water-leaving radiances.

• 한국입자에어로졸학회지
• /
• 제8권3호
• /
• pp.99-110
• /
• 2012

In the SCR (selective catalytic reduction) system which is used for controlling the NOx emission from the Diesel engines, the soot deposited on the catalysis causes degradation of the system performance. Numerical study was done to evaluate the performance of soot blower which is proposed as a method for removing the soot on the catalysis. The spray conditions and the effect of the compressed air from the AIG (air inlet gun) were analyzed numerically to evaluate the overall effective method of the soot blowing. The characteristics of the final velocity distribution and velocity waves across the inlet section of the catalysis were evaluated with respect to the geometries of the AIG outlets and pressure conditions. An experimental model was used to validate the results of the numerical calculation that is used for finding the effective removal blowing momentum transfer quantities of soot the inlet section of the catalysis, and it is proposed that the required minimum blowing momentum transfer quantities are over than 0.499 $kg/m{\bullet}t_{eff}$ in the current study.

• 대한원격탐사학회지
• /
• 제14권3호
• /
• pp.262-276
• /
• 1998

The paper first describes the atmospheric correction algorithm for the Ocean Color and Temperature Scanner (OCTS) visible band data used at Earth Observation Center (EOC) of National Space Development Agenrr of japan (NASDA). It uses 10 candidate aerosol models including "Asian dust model" introduced in consideration of the unique feature of aerosols over the east Asian waters. Based on the observations at 670 and 865 nm bands where the reflectance of the water body can be discarded, the algorithm selects a pair of aerosol models that accounts best for the observed spectral reflectances to synthesize the aerosol reflectance in other bands. The paper also evaluates the performance of the algorithm by comparing the satellite estimates of water-leaving radiance and chlorophyll-a concentration with selected buoy- and ship-measured data. In comparison with the old CZCS-type atmospheric correction algorithm where the aerosol reflectance is assumed to be spectrally independent, the OCTS algorithm records factor 2-3 less error in estimating the normalized water-leaving radiances. In terms of chlorophyll-a concentration estimation, however, the accuracy stays very similar compared to that of the CZCS-type algorithm. This is considered to be due to the nature of in-water algorithm which relies on spectral ratio of water-leaving radiances.

• 한국입자에어로졸학회지
• /
• 제14권4호
• /
• pp.107-119
• /
• 2018

In this study, we have developed a real-time monitoring device for measuring PM10 and PM2.5 of ambient aerosol particles. The real-time PM monitor (SENTRY Dust Monitor) uses the optical scattering method and has 16 channels in particle size. The laboratory and field tests were carried out to evaluate the developed SENTRY Dust Monitor. Arizona Test Dust particles were used as test particles in the laboratory test and the field test was carried out at the Jongno-gu Observatory in Seoul. The measurements of PM10 and PM2.5 concentrations obtained by SENTTRY Dust Monitor were compared with Grimm Dust Monitor (Model 1.108) and a beta ray gauge. It was shown that the PM10 and PM2.5 concentrations obtained by SENTRY Dust Monitor agree well with that of the reference devices. Based on the results obtained in this study, it could be concluded that the SENTRY Dust Monitor can be used as a PM monitoring device for real-time monitoring of the ambient aerosols.

• 한국지구과학회지
• /
• 제43권4호
• /
• pp.498-510
• /
• 2022

Cloud-aerosol interactions are one of the paramount but least understood forcing factors in climate systems. Generally, an increase in the concentration of aerosols increases the concentration of cloud droplet numbers, implying that clouds tend to persist for longer than usual, suppressing precipitation in the warm boundary layer. The cloud lifetime effect has been the center of discussion in the scientific community, partly because of the lack of cloud life cycle observations and partly because of cloud problems. In this study, the precipitation susceptibility (S_o) matrix was employed to estimate the aerosols' effect on precipitation, while the non-aerosol effect is minimized. The S_o was calculated for the typical coupled, well-mixed maritime stratocumulus decks and giant cloud condensation nucleus (GCCN) seeded clouds. The GCCN-artificially introduced to the marine stratocumulus cloud decks-is shown to initiate precipitation and reduces S_o to approximately zero, demonstrating the cloud lifetime hypothesis. The results suggest that the response of precipitation to changes in GCCN must be considered for accurate prediction of aerosol-cloud-precipitation interaction by model studies

• 한국지구과학회지
• /
• 제35권1호
• /
• pp.1-18
• /
• 2014

이 연구의 목적은 2008년 5월 29일 우리나라에 영향을 미치는 황사를 예측하기 위해 WRF-Chem 모델 내 에어로졸 스킴과 광물성 먼지 옵션에 따른 미세먼지 농도 변화와 그에 따른 기상장의 민감도를 분석하는 것이다. 미세먼지의 인위적 배출량에 대해서는 $0.5^{\circ}{\pm}0.5^{\circ}$ RETRO 전구 배출량을, 광해리의 경우 Fast-J 광해리 스킴을, 그리고 황사 발생량을 추정하기 위해 RADM2 화학메커니즘 및 MADE/SORGAM 에어로졸 시나리오, MOSAIC 8 섹션 에어로졸 시나리오, 그리고 GOCART 먼지 침식 시나리오를 각각 적용하였다. 그 결과 RADM2 화학메커니즘 및 MADE/SORGAM 에어로졸 시나리오가 다른 시나리오들보다 우리나라 황사 먼지 농도와 배경 PM 농도를 더 높게 모사하였다. 그리고 이 시나리오와 서울의 각 대기질 측정망의 평균 PM10 농도와의 비교 결과, 상관계수는 0.67, 평균제곱근오차는 $44{\mu}gm^{-3}$으로 나타났다. 또한 WRF-Chem 모델에서 상기 3가지 시나리오와 이들 시나리오가 없는 순수 기상에서의 온도, 풍속, 경계층 높이, 장파복사의 기상 민감도를 분석한 결과, 1,800-3,000 m 경계층 높이와 $2-16ms^{-1}$ 풍속 U 성분의 공간적 분포가 황사 먼지 발생의 공간적 분포와 유사하게 나타났다. 그리고 GOCART 먼지 침식 시나리오와 RADM2 화학메커니즘 및 MADE/SORGAM 에어로졸 시나리오는 황사 먼지 또는 에어로졸과 기상이 온라인으로 상호작용함으로써 지구장파복사가 더 낮게 모사되었다.

• 한국입자에어로졸학회지
• /
• 제10권1호
• /
• pp.27-31
• /
• 2014

A simple bimodal model has been developed to analyze charged particle coagulation by modifying previously suggested bimdal model for evolution of particle generation and growth. In the present model, two monodisperse modes are used and 40 charge nodes are assigned to each mode to account both change of the particle size and charge distribution. In addition, we also implemented the effect of electrostatic dispersion loss in the present model. Based on the developed model, we analyzed coagulation of asymmetric bipolar charged particles by computing evolutions of particle number concentration, geometric mean diameter of particles, charge asymmetric ratio and geometric standard deviation of particle size distribution for various initial charge asymmetric ratios. The number concentration of asymmetric bipolar charged particles decreases faster than that of neutral particles but that does not give faster growth of particles since the electrostatic dispersion loss overwhelms particle growth by coagulation.

• 한국입자에어로졸학회지
• /
• 제10권1호
• /
• pp.9-17
• /
• 2014

Several studies have been carried out on the source contribution of the particulate Polycyclic Aromatic Hydrocarbons (PAHs) over Seoul by using the Chemical Mass Balance Model (CMB)(Lee and Kim, 2007; Kim et al., 2013). To confirm the validity of the modeling results, the modified model employing a photochemical loss rate along with varying residence times and the standard model that considers no loss were compared. It was found that by considering the photochemical loss rate, a better performance was obtained as compared to those obtained from the standard model in the CMB calculation. The modified model estimated higher contributions from coke oven, transportation, and biomass burning by 4 to 8%. However, the order of the relative importance of major sources was not changed, coke oven followed by transportation and biomass burning. Thus, it was concluded that the standard CMB model results are reliable for identifying the relative importance of major sources.

• Nuclear Engineering and Technology
• /
• 제19권2호
• /
• pp.85-98
• /
• 1987

중대사고시 LMFBR의 에어로졸(aerosol) 동특성을 살피기 위해 전산코드인 MCAD (Multicomponent Aerosol Dynamics)가 개발되었다. 사고경과에 따른 두 방사능원의 상대적인 충돌확률을 적용하여 에어로졸계를 모사할 수 있다. Brownian 확산과 중력작용에 의한 결합 및 제거과정을 고려했으며, 입자형태를 묘사하기 위해 밀도보정과 형태요소(shape factor)를 동시에 고려하였다. ORNL의 NSPP-300 계열 실험자료와 기존의 코드를MCAD의 입증에 이용하였다. 그 결과 MCAD의 계산치와 실험치 및 기존의 코드 계산값이 일치함을 보여준다. 여러 입력자료의 불화실한 값들을 정의하고, 그들값의 한계로 설정하기 위하여 불확실성 및 민감도해석을 수행하였다. 14개의 입력자료를 선택하여 실험계획법과 Latin hypercube sampling에 의한 입력자료를 조합하여 그 회귀 (regression) 정도를 반응표면 계획법(Response surface method)에 의해 구하였다. 각 변수들의 중요성 및 시간경과에 따른 그들의 상대적인 등위를 결정하기 위하여 단계식 회귀방법 (Stepwise regression method)을 고려했다. LHS에 의한 회귀모형에 Monte Carlo Method를 적용하여 계산값 및 변수들에의 신뢰도를 향상시켰다.