• Journal of the Korean Society of Visualization
• /
• v.9 no.2
• /
• pp.27-33
• /
• 2011

Supersonic liquid jet discharged from a nozzle has been investigated by using a ballistic range which is composed of high-pressure tube, pump tube, launch tube and liquid storage nozzle. High-speed Schlieren optical method was used to visualize the supersonic liquid jet flow field containing shock wave system, and spray droplet diameter was measured by the laser diffraction method. Experiment was performed with various types of nozzle to investigate the major characteristics of the supersonic liquid jet operating at the range of total pressure of 0.8 from 2.14 GPa. The results obtained shows that shock wave considerably affects the detailed atomization process of the liquid jet and as the nozzle diameter decreases, the shock wave angle and the averaged SMD of spray droplet tends to decrease.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.71-74
• /
• 2012

Generally, tone noise is generated at the rotary wing and helicopter. BVI(Blade-Vortex Interaction) noise is one of the helicopter's tone noise. The BVI noise is governed by tip-vortex characteristics such as vortex size, strength and trajectory. To avoid BVI, many methods have been developed and proposed. In this paper, rotating blade with active tab was numerically investigated to reduce BVI noise. For flow and noise simulation, the lifting surface approach and the acoustic analogy were used. Using numerical methods, the noise directivity and maximum noise position were predicted.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.12 no.2
• /
• pp.59-70
• /
• 2004

Most of studies on aircraft accidents have been conducted mainly for fixed-wing aircraft, while the studies on helicopter accidents have been done less even though the helicopter accidents occurred quite more than those of the fixed-wing. There are lots of differences between helicopter and fixed-wing accidents, in aspect of causes and occurrence of accidents as well as aerodynamics and operation. In Korea, helicopter accidents have occurred 2 or 3 times annually since 2000, while the number of fixed-wing aircraft accidents has been reduced considerably. The goal of this study is to solve the present safety problems in helicopter accidents by reviewing the characteristics of past accidents and comparing differences between two types of aircraft.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.637-642
• /
• 2014

선행 연구에서 블레이드 뒷전에 탄성 플랩이 장착되면 받음각에 따라 양력의 증가가 항력의 증가보다 상대적으로 더 커지게 되어 전체적인 양항비(앙력과 항력의 비)가 증가하는 것을 확인하였다. 본 논문에서는 선행의 연구를 참조하여 플랩의 길이가 변함에 따라서 양력과 항력의 변화를 비교하였다. 블레이드의 종류와 플랩의 제원은 현재 이용되는 수직축 풍력 발전기의 제품과 동일하게 사용하였다. EDISON_CFD와 MIDAS_IT를 이용하여 플랩이 장착된 블레이드 주변의 유체 유동을 해석하고, 플랩의 상하변위를 계산하였다. 이 과정을 반복 수행하여 플랩의 거동을 분석하고 플랩의 길이와 받음각에 따른 양항비를 비교하여 이전보다 효율적인 플랩을 설계하였다.

• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.3
• /
• pp.215-221
• /
• 2013

The basic quantitative tool for the study of hypersonic rarefied flows is the direct simulation Monte Carlo method (DSMC). The DSMC method requires a large amount of computer memory and performance and is unreasonably expensive at the first stage of spacecraft design and trajectory analysis. A possible solution to this problem is approximate engineering methods. However, the Monte Carlo method remains the most reliable approach to compare to the engineering methods that provide good results for the global aerodynamic coefficients of various geometry designs. This paper presents the calculation results of aerodynamic characteristics for spacecraft vehicles in the free molecular, the transitional and the continuum regimes using the local engineering method. Results and methods would be useful to calculate aerodynamics for new-generation hypersonic vehicle designs.

• Smart Structures and Systems
• /
• v.6 no.7
• /
• pp.867-887
• /
• 2010

An energy-based variational approach is used for structural dynamic modeling of the IPMC (Ionic Polymer Metal Composites) flapping wing. Dynamic characteristics of the wing are analyzed using numerical simulations. Starting with the initial design, critical parameters which have influence on the performance of the wing are identified through parametric studies. An optimization study is performed to obtain improved flapping actuation of the IPMC wing. It is shown that the optimization algorithm leads to a flapping wing with dimensions similar to the dragonfly Aeshna Multicolor wing. An unsteady aerodynamic model based on modified strip theory is used to obtain the aerodynamic forces. It is found that the IPMC wing generates sufficient lift to support its own weight and carry a small payload. It is therefore a potential candidate for flapping wing of micro air vehicles.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.813-824
• /
• 2004

The paper studies the effect of neighboring blade rows on flutter characteristics of cascading blades. For this purpose the computation program to calculate the unsteady blade loading based on the un-steady lifting surface theory for contra-rotating annular cascades was formulated and coded. Then a computation program to solve the coupled bending-torsion flutter equation for the contra-rotating annular cascades was also developed. Some results of the flutter analysis are presented. The presence of the neighboring blade row gives rise to significant change in the critical flutter condition when the main acoustic duct mode is of cut-on state.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.365-370
• /
• 2013

현대에 이르러 초음속 운영 영역에서의 항공기에 대한 많은 연구가 진행되고 있으나, 음속 폭음 현상과 충격파 현상에서 야기된 높은 항력 및 연료 효율성 저하로 인하여 그 한계에 부딪치고 있다. Busemann 복엽 익형은 이와 같은 문제를 해결하기 위한 형상이며, 상하 형상에 의한 파동 상쇄효과 및 파동 감소효과를 통해 충격파의 강도와 음속 폭음 효과를 감소시키는 형상이다. 하지만 본 익형은 탈설계 조건에서 항력 계수가 급격하게 증가하는 등의 문제점을 가지고 있다. 본 연구에서는 EDISON_CFD를 이용하여 Busemann 복엽 익형의 주변 유동 특성에 대하여 면밀한 고찰을 수행하였다. 우선 Busemann 복엽 익형의 초기 형상에 대한 유동 조건별 해석을 통하여 탈설계 조건에서의 항력 성능 저하 문제에 대한 고찰을 하였다. 이후 3개의 형상 변수에 대한 매개 변수 연구를 통하여 익형의 각 형상 변수가 탈설계 영역 및 해당 영역에서의 최대 항력 계수에 미치는 영향에 대한 고찰을 수행하였으며, 이를 통하여 기존 형상보다 좁은 탈설계 구간을 가지고, 최대 항력 계수가 약 34.8% 감소한 부스만 복엽 익형을 설계하였다.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2234-2236
• /
• 2001

This paper describes an implementation of a radiocontrolled airplane attitude control. To obtain the model of motion, stabilizing and control coefficients, we derive the related paramaters from aerodynamics, propulsion, gravity, wind correction and atmosphere. In this model, after separating longitudinal axis and lateral axis, we can get longitudinal axis model and lateral axis model by using actuator and dynamic characteristics of engine. From these two models, we experiment two divided parts-linear part, and nonlinear part.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1207-1214
• /
• 2001

The paper deals with the computational approach in analysis and design of pantograph panhead strips of high-speed railway in aerodynamic and aeroacoustic concerns. Pantograph is an equipment such that the electric power is supplied from catenary system to train. Due to the nature of complexity in high-speed fluid flow, turbulence and downstream vortices result in the instability in the aerodynamic contact between panhead strips and catenary system, and consequently generate the considerable levels of flow-induced sound. In this paper, based on the preceding low speed wind-tunnel test and simulations, the aerodynamic and aeroacoustic characteristics in low speed are analyzed.