• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.3
• /
• pp.1-8
• /
• 2013

An application of adaptive flight controller is required for the non-linear and high uncertain system that configuration of tiltrotor aircraft is dramatically changed from rotary wing mode to fixed wing mode. In this paper, the applicable adaptive controller for the tiltrotor aircraft was designed using Neural Networks and DMI (Dynamic Model Inversion). The performance of the SCAS (Stability and Control Augmentation System) was simulated against manned military specification, using the fullscale model of 'Smart UAV(Unmanned Aerial Vehicle)' developed by Korea Aerospace Research Institute. And Neural Networks based adaptive controller was verified through its whole operating envelope using the established HQ (Handling Quality) criteria.

• Journal of information and communication convergence engineering
• /
• v.16 no.2
• /
• pp.78-83
• /
• 2018

Rapidity and accuracy are important considerations when a drone is employed in a wide surveillance area to detect a target. They are more important when the scope of application is a search and rescue operation or the monitoring of natural disasters, which may require prompt warnings and response. During the actual operation of a drone, rapidity and accuracy are associated with the change in the altitude of the drone. The aim of this study is to analyze the characteristics of drones at varying altitudes and prove that altitude is a relevant factor in the performance of drones. Herein, the characteristics of the drone at varying altitudes were analyzed through several search simulations. The results suggest that a high-altitude drone is relatively advantageous compared to a low-altitude drone in a probability-based target search, and that the search altitude is also a very important and fundamental factor in target search by drones.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.85-92
• /
• 2003

Application of traditional aerial survey technologies for topographic mapping purposes has a number of principal problems. The growing worldwide acceptance of digital orthophotos has understood this need. Many trekking and expedition teams are expecting digital orthophoto and consequently 3D animation of the highest peaks and possible trekking routes, camping sites and information on how difficult the routes may be. In recent years, inexpensive computers and advance of computer technologies contributed to the rapid development of digital photogrammetry (Dowman et al., 1992; Heipke, 1995). Successful implementation of digital photogrammetric workstations in mapping have been found in various disciplines (Chen et al., 1998; Skalet et al., 1992). This paper highlights the results of the conventional photogrammetry and the possible advantages of digital photogrammetry over these and also the problems, issues and implications during digital Photogrammetric processing of high mountainous region in Asia.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.5
• /
• pp.315-322
• /
• 2019

DSM (Digital Surface Model) is a digital representation of ground surface topography or terrain that is widely used for hydrology, slope analysis, and urban planning. Aerial photogrammetry and LiDAR (Light Detection And Ranging) are main technology for urban DSM generation but high-resolution satellite imagery is the only ingredient for remote inaccessible areas. Traditional automated DSM generation method is based on correlation-based methods but recent study shows that a modern pixelwise image matching method, SGM (Semi-Global Matching) can be an alternative. Therefore this study investigated the application of SGM for Kompsat satellite data of KARI (Korea Aerospace Research Institute). Firstly, the sensor modeling was carried out for precise ground-to-image computation, followed by the epipolar image resampling for efficient stereo processing. Secondly, SGM was applied using different parameterizations. The generated DSM was evaluated with a reference DSM generated by the first pulse returns of the LIDAR reference dataset.

• Electronics and Telecommunications Trends
• /
• v.33 no.6
• /
• pp.118-128
• /
• 2018

With the massive increase in bandwidth for wireless communications, free space optical (FSO) communication has attracted significant interest owing to its outstanding strengths over conventional radio frequency wireless communication such as a wide bandwidth, unlicensed spectrum, low power consumption, small size, electromagnetic interference immunity, long-range propagation, and improved security. In recent years, FSO technology has been studied intensively for use in terrestrial and underwater autonomous and unmanned mobile systems, a rapidly growing application area, including robots, drones, unmanned aerial vehicles, autonomous vehicles, unmanned trains, and unmanned submarines. In this report, we review the recent trends and key technologies for the mobile FSO system, and introduce our drone-based mobile FSO system, which is currently under development.

• Current Optics and Photonics
• /
• v.3 no.3
• /
• pp.227-235
• /
• 2019

With slimmer, lighter and all-reflective imaging systems in high demand for consumer and military applications, coaxially folded optical image systems are widely considered because they can extend focal length and reduce track length. Most of these systems consist of multiple surfaces, and these surfaces are machined on one element or grouping processing on two elements. In this paper, we report and first experimentally demonstrate an all-aluminum all-reflective optical system which consists of two optical elements, with two high order aspherical surfaces in each element. The coaxially folded system is designed with Seidel aberration theory and advanced optimization with Zemax. The system is made of all-aluminum material processing by single point diamond turning (SPDT). On this basis, we completed the system integration and performed an imaging experiment. The final system has the advantages of short track length and long focal length and broad application prospects in the micro-unmanned aerial vehicle field.

• Journal of Korean Society of Forest Science
• /
• v.30 no.1
• /
• pp.1-7
• /
• 1976

This study was performed in Bo-Eun Gun, Chung-Cheong Buk Do. The forest types having been classified, the each area was measured by dot-grid method. The 820 sample points having been obtained by systematic sampling method, the tree heights, crown densities, crown diameters in the points were measured on the aerial photography, and the volumes per hectare were estimated by the comparison with stereogram. Thirty eight plots, which amounted to about 4.5% of all the sample points, were sampled with double sampling method and volume were measured by the ground survey method. the results were summarized as follows; 1. There is no significant differentia between the values measure by dot-grid method and the statistical values obtained by the authority for the area. 2. There is no significant differentia between the estimated values and the measured values for the volume. And the coefficient (b) was 1.18. 3. The heights of conifer trees were easily measured more or less, but it was some difficult for the deciduous trees, because the tops of trees were not observed easily. 4. All the values had a tendencies to be overestimated in the low stocked stand and to be underestimated in the high stocked stand. 5. When the aerial volume table method by ground checking needs to be used together, the work should be performed by the experienced technician and the photgraphic volume table should be made in advanced of the work.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.1-6
• /
• 2020

UAV (Unmanned Aerial Vehicles) are used widely for military purposes because they are more economical than general manned aircraft and satellites, and have easy access to the object. Recently, owing to the development of IT technology, UAV equipped with various sensors have been released, and their use is increasing in a wide range of fields, such as surveying, agriculture, meteorological observation, communication, broadcasting, and sports. An increasing number of studies and attempts have made use of it. On the other hand, existing research was related mostly to photogrammetry, but there has been a lack of analytical research on LiDAR (Light Detection And Ranging). Therefore, this study examined the characteristics of a UAV LiDAR sensor for the application of a geospatial information field. In this study, the performance of commercialized LiDAR sensors, such as the acquisition speed and the number of echoes, was investigated, and data acquisition and analysis were conducted by selecting Surveyor Ultra and VX15 models with similar accuracy and data acquisition distances. As a result, a DSM of each study site was generated for each sensor, and the characteristics of data density, precision, and acquisition of ground data from vegetation areas were presented through comparison. In addition, the UAV LiDAR sensor showed an accuracy of 0.03m ~ 0.05m. Hence, it is necessary to select equipment considering the characteristics of data for effective use. In the future, the use of UAV LiDAR may be suggested if additional data can be obtained and analyzed for various areas, such as urban areas and forest areas.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.427-436
• /
• 2016

Due to disasters such as earthquakes and landslides in urban areas, persons have been buried inside collapsed buildings and structures. Rescuers have mainly utilized detection equipment by applying sound, video and electric waves, but these are expensive and due to the directional approaches onto the collapsed site, secondary collapse risk can arise. In addition, due to poor utilization of such equipment, new human detection technology with quick and high reliability has not been utilized. To address these issues, this study develops a wireless signal-based human detection module that can be loaded into an Unmanned Aerial Vehicle (UAV). The human detection module searches for the 3D location for buried persons by collecting Wi-Fi signal and barometer sensors data transmitted from the mobile phones. This module can gain diverse information from mobile phones for buried persons in real time. We present a development framework of the module that provides 3D location data with more reliable information by delivering the collected data into a local computer in the ground. This study verified the application feasibility of the developed module in a real collapsed area. Therefore, it is expected that these results can be used as a core technology for the quick detection of buried persons' location and for relieving them after disasters that induce building collapses.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.111-126
• /
• 2017

Small-scale UAS(Fusion technique of Unmanned Aerial Vehicles platform and Sensors, 'sUAS') opens various new applications in construction fields and so becoming progressively common due to the considerable potentials in terms of accuracy, costs and abilities. The purpose of this study is that the investigation of the validation on the utilization of sUAS for earth stockpile volume calculations on sites. For this, generate 3D models(DSM) with sUAS aerial images on an cone shaped soil stockpile approximately $270m{\times}300m{\times}20m$, which located at Baegot Life Park in Siheung-si, compared stockpile volume estimates produced by sUAS image analysis, against volume estimates obtained by GNSS Network-RTK ground surveying method which selected as the criteria of earth stockpile volume. The result through comparison and examination show(demonstrate) that there was under 2% difference between the volume calculated with the GNSS Network RTK data and the sUAV data, especially sUAS imaged-based volume estimate of a stockpile can be greatly simplified, done quickly, and very cost effective over conventional terrestrial survey methods. Therefore, with consideration of various plan to assess the height of vegetation, sUAS image-based application expected very useful both volume estimate and 3D geospatial information extraction in small and medium-sized sites.