• 동의생리병리학회지
• /
• 제19권5호
• /
• pp.1204-1212
• /
• 2005

Lung cancer is one of the common malignant tumors in the world. It occurs more increasingly due to the serious air pollution, heavy smoking, expoure to ionized radiation, pollution with heavy metal, and owing to well advanced diagnostic skill, etc. Also lung cancer has the limitation of medical care because metastasis is already shown up in more than half cases when it is first detected through medical examination. Although it is treated with chemoradiation, the rate of deaths from lung cancer is high as well, because blood has a lot of toxicity which give side effects. So it has a low rate of cure. So, the ways of various treatment is being researched to raise the rate of care and decrease the side effects recently, and one of the results is inducing apoptosis which makes use of molecularbiologic diagnosis of lung cancer's cell and using oriental medicine drugs. The purpose of this study is whether apoptosis would happen on the human lung carcinoma cell by treated with Junglyeokdaejosape-tang, Junglyeok-tang Junglyeokdaejosape-tang and Junglyeok-tang has been prescribed for cough, chest pain, and many other similar cases. Cough and chest pain is shown in early lung cancer. That is why we used these prescriptions. Apoptosis happend on the human lung carcinoma A549 cells treated with Jeongiyeokdaejosapye-tang, Jeonglyeok-tang. The concentration-dependent inhibition of cell viability was observed and apoptosis was confirmed by DNA fragmentation. Bcl-2 and COX-2 mRNA expression decreased, but Bax mRNA expression increased, so it was identified with the case of indomethacin known to enhance apoptotic DNA fragmentation. Also expression of the p21, p53, cyclin E, cyclin D1, cytochrome c, caspase-3, and caspase-9 protein increased and the activity of caspase-3 increased, as well. Last, fragmentation of the PARP was shown. The previous and present results indicated that apoptosis of A549 cells by above-mentioned drugs is associated with the blockage of G1/S progression.

• 상하수도학회지
• /
• 제23권4호
• /
• pp.439-446
• /
• 2009

This study was performed to evaluate SND(simultaneous nitrification and denitrification)efficiency, nitrogen removal efficiency and filtration function of non-woven fabric by using submerging MBR packed with granular sulfur covered with non-woven fabric filter. Synthetic wastewater was used as influent wastewater. Concentration of $NH_4{^+}-N$ in influent was maintained about 40 mg/L and the experiment was performed in four phases according to the flow rate. Nitrogen loading rate divided four phases ranging from $0.04 kg\;NH_4{^+}-N/m^3-day$ to $0.16 kg\;NH_4{^+}-N/m^3-day$. As a result, the maximum $NH_4{^+}-N$ removal rate was accomplished at $0.142 kg\;NH_4{^+}-N/m^3-day$ in nitrogen loading of $0.147 kg\;NH_4{^+}-N/m^3-day$. Nitrification efficiency was higher than 95% in all phases. $NO_3{^-}-N$ loading rate was adjusted ranging from $0.22 kg\;NO_3{^-}-N/m^3-day$ to $0.89 kg\;NO_3{^-}-N/m^3-day$. The maximum $NO_3{^-}-N$ removal rate was accomplished up to $0.71 kg\;NO_3{^-}-N/m^3-day$ in $NO_3{^-}-N$ loading of $0.89 kg\;NO_3{^-}-N/m^3-day$. The maximum $NO_3{^-}-N$ removal efficiency was 95% in $NO_3{^-}-N$ loading of $0.22 kg\;NO_3{^-}-N/m^3-day$. T-N removal rate was 90% and concentration of T-N in effluent was 3.7 mg/L in T-N loading rate of $0.039 kg\;NO_3{^-}-N/m^3-day$. In this study, TMP in reactor with and without non-woven fabric filter were observed to define fouling of hollow-fiber membrane module. Reaching time to standard washing pressure(22 cm Hg) of two reactors were 29 days with non-woven fabric But the reactor without non-woven fabric reached standard washing pressure only after 4 days. Accordingly, non-woven fabric was demonstrated the superiority as a filtration ability. With high nitrogen removal rate and decreasing of fouling of membrane, MBR packed with granular sulfur covered with non-woven fabric filter submerging in activated sludge aeration tank can be used as an advanced treatment process.

• 한국분말재료학회지
• /
• 제24권2호
• /
• pp.133-140
• /
• 2017

This study investigates the oxidation properties of Fe-14Cr ferritic oxide-dispersion-strengthened (ODS) steel at various high temperatures (900, 1000, and $1100^{\circ}C$ for 24 h). The initial microstructure shows that no clear structural change occurs even under high-temperature heat treatment, and the average measured grain size is 0.4 and $1.1{\mu}m$ for the as-fabricated and heat-treated specimens, respectively. Y-Ti-O nanoclusters 10-50 nm in size are observed. High-temperature oxidation results show that the weight increases by 0.27 and $0.29mg/cm^2$ for the as-fabricated and heat-treated ($900^{\circ}C$) specimens, and by 0.47 and $0.50mg/cm^2$ for the as-fabricated and heat-treated ($1000^{\circ}C$) specimens, respectively. Further, after 24 h oxidation tests, the weight increases by 56.50 and $100.60mg/cm^2$ for the as-fabricated and heat-treated ($1100^{\circ}C$) specimens, respectively; the latter increase is approximately 100 times higher than that at $1000^{\circ}C$. Observation of the surface after the oxidation test shows that $Cr_2O_3$ is the main oxide on a specimen tested at $1000^{\circ}C$, whereas $Fe_2O_3$ and $Fe_3O_4$ phases also form on a specimen tested at $1100^{\circ}C$, where the weight increases rapidly. The high-temperature oxidation behavior of Fe-14Cr ODS steel is confirmed to be dominated by changes in the $Cr_2O_3$ layer and generation of Fe-based oxides through evaporation.

• 자원환경지질
• /
• 제51권4호
• /
• pp.371-379
• /
• 2018

많은 나라에서는 화력발전소 석탄연소 잔재물로 생산되는 석탄재를 소량의 시멘트와 혼합, 저강도 콘크리트를 만들어 지반함몰지, 폐갱도, 도로관거 뒷채움재 등으로 재활용하는 방안이 석탄재의 대규모 처리방안으로 자주 검토된다. 본 연구에서는 석탄재로 저강도콘크리트를 만들어 콘크리트 내 중금속함량 변화를 고찰하였다. 이를 위하여 시멘트만을 사용하는 경우와 시멘트의 반을 비산재로 대체하는 경우, 모래를 골재로 사용하는 경우, 그리고 회처리장의 매립재로 모래골재를 대체하는 경우에 대한 콘크리트 공시체를 제작하여 중금속농도 변화를 고찰하였다. 중금속 함량은 토양오염공정시험기준에 따라 이루어졌으며, 중금속함량에 가장 큰 영향을 주는 재료들도 평가하였다. 연구결과, 시멘트는 다른 어떤 재료들 보다 Cu, Pb, Zn에서 현격히 높은 중금속농도를 보였다. 이로 인하여 시멘트를 비산재로 대체할 경우 중금속 농도는 뚜렷이 낮아지는 경향을 보였다. 매립재는 전체적으로 비산재에 비하여 낮은 중금속농도를 보였지만, 모래보다는 높은 Cu 및 Ni농도와 낮은 Pb농도를 보였다. 전체적으로는 콘크리트 내 중금속농도는 각 재료의 혼합에 의하여 결정되는 양상을 보였다. 본 연구에서 제작된 공시체는 모든 조사된 항목에 있어 토양환경보전법이 정한 토양오염우려기준(1지역)보다 현격히 낮은 농도를 보였다.

• 공업화학
• /
• 제17권5호
• /
• pp.552-556
• /
• 2006

본 연구에서는 70000 mg/L 가량의 고농도 철(III)-에틸렌디아민테트라아세트산(Fe(III)-EDTA)을 함유하고 있는 원전 증기발생기 화학 세정 폐액의 처리를 위해 펜톤 반응을 사용하였다. Fe(III)-EDTA 분해실험은 모사 폐액 뿐 아니라 실제 폐액을 가지고도 수행되었다. 폐액에 주입된 과산화수소의 양과 폐액의 pH가 Fe(III)-EDTA 분해에 미치는 영향이 정량적으로 평가되었고, 다양한 측면에서 고찰되었다. 분해효율이 최대가 되는 최적의 pH는 폐액에 주입된 과산화수소의 양에 의존하였다. 즉, 폐액에 주입된 과산화수소의 양이 다를 때 최대 분해효율이 얻어지는 pH가 달랐다. Fe(III)-EDTA의 분해를 위한 적정 조건은 폐액의 초기 pH가 9이고 과산화수소 주입량이 24.7 mol ($H_{2}O_{2}$)/mol (Fe(III)-EDTA)일 때였다.

• Journal of Periodontal and Implant Science
• /
• 제28권1호
• /
• pp.37-56
• /
• 1998

The purpose of this study was to evaluate the clinical and microbiological outcomes following the use of 30% minocycline-loaded polycaprolacton film and 2% minocycline-loaded gel that was applied locally into pockets combined with scaling and root planing. 25 human subjects who were non-pregnant, non-lactating, aged 20-50 and diagnosed as moderate to advanced adult periodontitis were enrolled. Subjects were excluded if they had a history of severe acute or chronic systemic disease, if they required antibiotic prophylaxis for dental treatment for any reason, or if they reported a history suggestive of hypersensitivity reactions to minocycline or tetracycline. 4quadrants that had several teeth with a 5-8mm probing pocket depth and radiographic evidence of alveolar bone loss for each patient were selected and divided into test sites and control sites according to the split-mouth design. Scaling and root planing was done for each site at baseline(0week). Test sites received the minocycline gel and strip and control sites had saline irrigation. The patients received both treatments simyltaneously. Subgingival irrigation of sterile saline was applied to the control sites for approximately 30 seconds. Minocycline strip and gel was applied into the periodontal pocket at 1, 2, 3, 4 weeks each after scaling and root planing in the test sites. The clinical and microbiological measurements were made at baseline and at the follow-up visits 6, 10, 14, 20 weeks. The results of this study were as follows; 1. The sulcular bleeding index, probing pocket depth and Periocheck test was significantly reduced and the relative proportions of spirochetes and motile rods were significantly reduced and the proportion of cocci was correspondingly increased, in locally delivered minocycline strip group compared to saline irrigation group. 2. In locally delivered minocycline gel group, The effect was the same with minocycline strip group as compared with saline irrigation therapy. 3. There was no significant differences between minocycline strip group and minocycline gelgroup. In conclusion, minocycline HCl local drug delivery combined with scaling and root planing may provide added improvement of clinical and microbiological responses by inhibiting bacterial recolonization of treated sites. It is suggested that the local administration of minocycline-HCl in the periodontal pocket is effective when combined with subgingival mechanical debridement.

• Journal of Periodontal and Implant Science
• /
• 제36권3호
• /
• pp.683-691
• /
• 2006

This study is an analysis of distribution of patients who installed Implantium implant in Yonsei University Dental Hospital and types of implant site for about 1 years recall check and success rate. 164 implants were installed to 52 patients in this study. It shows the conclusion below. 1. Patients at the age of 40s and 50s were 65% of all implant cases and average number of implant was 4 (man), and 2.7 (woman). 75 implants were operated on maxilla and 89 were mandible. 19 implants on anterior region and 145 implants on posterior region. 2. Most distribution of bone qaulity for implant site was type III(37.2%) and bone quantity was type C(61. 7%) 3. The majority of implants were those of 10, 12mm in length (85%) and regular diameter in width (48.8%). 4. 30 implants were installed with the advanced technique-GER, window opemng, osteotome technique. 5. Two implants were removed before prosthodontic treatment due to the osseointegraton failure. The success rate was 98.8% in 15.2 months follow up period and the marginal bone loss was 0.28mm. The results provided us with basic data on patient type, implant distribution, bone condition, and survival rate. Within the limit of present study, It was concluded that Implantium implant could be used satisfactorily in various clinical situations.

• The Journal of Advanced Prosthodontics
• /
• 제6권3호
• /
• pp.200-206
• /
• 2014

PURPOSE. This in vitro study investigated the fracture resistance of endodontically treated premolars restored using silorane-or methacrylate-based composite along with or without fiber or nano-ionomer base. MATERIALS AND METHODS. Ninety-six intact maxillary premolars were randomly divided into eight groups (n = 12). G1 (negative control) was the intact teeth. In Groups 2-8, root canal treatment with mesio-occlusodistal preparation was performed. G2 (positive control) was kept unrestored. The other groups were restored using composite resin as follows: G3, methacrylate-based composite (Z250); G4, methacrylate composite (Z250) with polyethylene fiber; G5 and G6, silorane-based composite (Filtek P90) without and with the fiber, respectively; G7 and G8, methacrylate-and silorane-based composite with nano-ionomer base, respectively. After aging period and thermocycling for 1000 cycles, fracture strength was tested and fracture patterns were inspected. The results were analyzed using ANOVA and Tukey HSD tests (${\alpha}$=0.05). RESULTS. Mean fracture resistance for the eight groups (in Newton) were G1: $1200{\pm}169^a$, G2: $360{\pm}93^b$, G3: $632{\pm}196^c$, G4: $692{\pm}195^c$, G5: $917{\pm}159^d$, G6: $1013{\pm}125^{ad}$, G7: $959{\pm}148^d$, G8: $947{\pm}105^d$ (different superscript letters revealed significant difference among groups). Most of the fractures in all the groups were restorable, except Group 3. CONCLUSION. Silorane-based composite revealed significantly higher strength of the restored premolars compared to that of methacrylate one. Fiber insertion demonstrated no additional effect on the strength of both composite restorations; however, it increased the prevalence of restorable fracture of methacrylate-based composite restored teeth. Using nano-ionomer base under methacrylate-based composite had a positive effect on fracture resistance and pattern. Only fiber-reinforced silorane composite restoration resulted in a strength similar to that of the intact teeth.

• Tuberculosis and Respiratory Diseases
• /
• 제53권3호
• /
• pp.285-293
• /
• 2002

배 경 : 폐는 악성 종양이 흔히 전이되는 장소로 흔히 폐실질, 흉막, 혹은 임파선으로 주로 전이되며, 기관지내 전이는 흔하지 않아 악성 종양의 기관지내 발생율은 2%정도로 알려져 있다. 저자들은 굴곡성 기관지경 검사로 확인된 증례들을 대상으로 기관지내 전이암에 대한 임상적 특징을 알아보고자 하였다. 연구방법 : 1991년 6월부터 2001년 5월까지 10년 동안 연세대학교 의과대학 세브란스병원에서 굴곡성 기관지경 검사로 폐외 악성 종양의 기관지내 전이가 확인된 27예를 대상으로 임상 양상, 치료, 경과 등을 조사하였다. 연구결과 : 평균연령은 53세이고, 남자가 17예, 여자가 10예이었다. 원발 종양은 대장암이 가장 많았으며, 자궁경부암, 위암, 유방암의 순서이었다. 원발 종양의 진단에서부터 기관지내 전이를 발견할 때까지의 기간은 평균 45.5개월이었으며, 유방암이 85.3개월로 다른 종양들에 비해 길었다. 임상 증상은 기침이 가장 많았고, 흉부 X-선 소견은 폐문부 종괴음영, 단일결절, 무기폐가 많았다. 치료는 수술, 항암 화학요법, 방사선치료 등을 시행하였고, 생존기은 평균 12.3개월이었다. 결 론 : 기관지내 전이암은 임상에서 흔한 질환이 아니며, 증상, 방사선 소견, 기관지경 소견 등이 원발성 폐암과 유사하다. 따라서 악성 종양의 병력이 있으면서 지속적인 증상이 있거나 비전형적인 병리소견을 보일 때에는 기관지내 전이암의 가능성을 염두에 두고 접근하여야 한다.

• Korean Chemical Engineering Research
• /
• 제40권6호
• /
• pp.763-768
• /
• 2002

본 실험은 polyvinyl alcohol을 이용하여 고정화한 질화세균을 공기부상식 생물반응기에 충진시켜 저농도의 암모니아성 질소(total ammonia nitrogen, TAN)를 제거시켰다. 공탑 공기 유속 0.83 cm/sec에서 제거속도는 $316.6{\pm}7.2g/m^3{\cdot}day$, 제거효율은 $92.8{\pm}2.2%$였다. 수력학적 체류시간이 0.5시간에서 0.05시간으로 감소함에 따라 제거속도는 점점 증가하였으며, 제거효율은 체류시간이 증가함에 따라 증가하였고 체류시간 0.35시간 이상에서 최대 제거효율을 나타냈다. 질산화의 최적 온도는 $30^{\circ}C$였으며 제거효율은 $95.5{\pm}1.5%$였고 $10^{\circ}C$의 저온에서도 79%의 제거효율을 보여줌으로써 저온에서의 질산화가 가능하며, 반응기 내 pH7-9에서 제거속도와 제거효율이 각각 $310{\pm}10g/m^3{\cdot}day$와 $94{\pm}3%$를 유지했다.