• Journal of the Korea Institute of Building Construction
• /
• v.12 no.5
• /
• pp.490-502
• /
• 2012

The use of recycled aggregate, even for low-performance concrete, has been very limited because recycled aggregate, which contains a large amount of old mortar, is very low in quality. To produce a high-quality recycled aggregate, removing the paste that adheres to the recycled aggregate is very important. We have conducted research on a complex abrasion method, which removes the component of cement paste from recycled fine aggregate by using both a low-speed wet abrasion crusher as a mechanical process and neutralization as chemical processes, and well as research on the optimal manufacturing condition of recycled fine aggregates. Subsequently, we evaluated the quality of recycled fine aggregate manufactured using these methods, and tested the specimen made by this aggregate. As a result, it was found that recycled fine aggregates produced by considering the aforementioned optimal abrasion condition with the use of sulfuric acid as reactant showed excellent quality, recording a dry density of 2.4 and an absorption ratio of 2.94. Furthermore, it was discovered that gypsum, which is a reaction product occurring in the process, did not significantly affect the quality of aggregates. Furthermore, the test of mortar using this aggregate, when gypsum was included as a reaction product, showed no obvious retarding effect. However, the test sample containing gypsum recorded a long-term strength of 25.7MPa, whereas the test sample that did not contain gypsum posted a long-term strength of 29.4MPa. Thus, it is thought to be necessary to conduct additional research into the soundness and durability because it showed a clear reduction of strength.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.5
• /
• pp.413-419
• /
• 2008

Deterministic design optimization (DO) does not explicitly deal with a variety of factors from inherent randomness and uncertainties. Reliability based design optimization(RBDO) is necessary to use in engineering systems in order to guarantee quality and performance of product. In this paper, design variables are considered as random variables. Standard deviation according to change of design variables have changed as much as coefficient of variation. And, if the standard deviation is error of manufacturing, standard deviation-mean relation is concave form. We obtain reliability index using advanced first order second moment method(AFOSM). This paper is examined by solving two examples and the results are compares with DO, RBDO and suggested RBDO.

• Elastomers and Composites
• /
• v.34 no.2
• /
• pp.113-120
• /
• 1999

Nobody doubts to say that one of the most important performance polymers is a conductive polymer. The manufacturing process of the commercial conductive polymers has been known by mixing with the conductive materials, but it doesn't noticeably appear of a conductive function. One of the reasons is the lack of comprehension In compounding a carbon black with polymer rosins. This paper involves the understanding of compounding technology of the conductive carbon black filled composite. Our experimental results indicate that the fibrous shaped carbon black was hard to process but appeared of a superior conductivity compared to a stick or a sphelulite shaped carbon black. Therefore, it was processed with a processing oil in compounding, which led to a better processability and a better conductivity. This study was accomplished that the solution process compared to the melting process.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.2
• /
• pp.92-97
• /
• 2013

PURPOSE. All-ceramic crowns are subject to fracture during function. To minimize this common clinical complication, zirconium oxide has been used as the framework for all-ceramic crowns. The aim of this study was to compare the fracture strengths of two computer-aided design/computer-aided manufacturing (CAD/CAM) zirconia crown systems: Lava and Digident. MATERIALS AND METHODS. Twenty Lava CAD/CAM zirconia crowns and twenty Digident CAD/CAM zirconia crowns were fabricated. A metal die was also duplicated from the original prepared tooth for fracture testing. A universal testing machine was used to determine the fracture strength of the crowns. RESULTS. The mean fracture strengths were as follows: $54.9{\pm}15.6$ N for the Lava CAD/CAM zirconia crowns and $87.0{\pm}16.0$ N for the Digident CAD/CAM zirconia crowns. The difference between the mean fracture strengths of the Lava and Digident crowns was statistically significant (P<.001). Lava CAD/CAM zirconia crowns showed a complete fracture of both the veneering porcelain and the core whereas the Digident CAD/CAM zirconia crowns showed fracture only of the veneering porcelain. CONCLUSION. The fracture strengths of CAD/CAM zirconia crowns differ depending on the compatibility of the core material and the veneering porcelain.

• Journal of Fashion Business
• /
• v.16 no.2
• /
• pp.44-61
• /
• 2012

The 21st century directs designomics to achieve wealth by designing old beyond a simple recognition of the importance of culture. One of the representative local cultures of Gyeongnam is Gaya culture. The Gaya period had over 600 years history with rich and excellent iron manufacturing skill and advanced pottery culture. It is the very time to reevaluate the importance of Gaya equivalent to the Three Kingdoms in our ancient history which was has been so far ignored and isolated. In order to develop unique and excellent culture of Gaya as local fashion cutural goods, questionnaire survey on the recognition of Gaya culture and cultural goods purchasing status had been conducted to target visitors of Representative National Museum. Data Analysis Using SPSS 18.0 Win was performed with frequency analysis and t-test. As to the questionnaire survey, important criteria for purchasing in case of buying cultural goods could be found and the residents in Gyeongnam had higher recognition of developing cultural goods by the motif of Gaya relics. 'Mounted vessel in the shape of warrior on horseback(12.4%)' and 'Chariot wheel-shaped Pottery(10.8%)' were selected the most suitable motif, 'Cellphone strap(11.0%)' and 'key holder(10.2%), 'cup (7.2%)'were selected the most suitable item of cutural goods. These will be actively reflected in the development of fashion cultural goods design applying Gaya relics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.10
• /
• pp.901-908
• /
• 2012

In an intelligent automated manufacturing environment, an administrator may use M2M (Machine-to-Machine) communication to recognize machine movement and the environment, as well as to respond to any potential dangers. However, commonly used wireless protocols for this purpose such WLAN (Wireless Local Area Network), ZigBee, and Bluetooth use the same ISM (Industrial Science Medical) band, and this may cause frequency interference among different devices. Moreover, an administrator is frequently exposed to dangerous conditions as a result of being surrounded by densely distributed moving machines. To address this issue, we propose in this paper to employ a location-based frequency interference management using fingerprinting scheme in industrial environments and its advanced localization schemes based on k-NN (Nearest Neighbor) algorithms. Simulation results indicate that the proposed schemes reduce distance error, frequency interference, and any potential danger may be responded immediately by continuous tracing of the locations.

• Journal of Sensor Science and Technology
• /
• v.14 no.5
• /
• pp.322-330
• /
• 2005

A new type of transducer, piezoelectric floating mass transducer (PFMT) which has advantages of piezoelectric and electromagnetic transducer has been proposed and implemented for the implantable middle ear hearing devices. By the uneven bonding of piezoelectric material to the inner bottom of transducer case, the PFMT can vibrate back-and-forth along the longitudinal axis of the transducer even though the piezoelectric material within the cylindrical case produces only the bilateral expansion and contraction according to the applied electrical signal. To improve efficiency of the PFMT, the multi-layered piezoelectric material has been adapted. The small number of components in the PFMT enables the simple manufacturing and the easy implanting into the middle ear. In order to examine the characteristics of vibration, mechanical modeling and finite element analyses of the proposed transducer have been performed. From the result of theoretical analyses and the measured data from the experiment, it is verified that the implemented PFMT can be used in implantable middle ear hearing devices.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.11
• /
• pp.1399-1408
• /
• 2011

This study analyzes the current educational curricula in the field of clothing construction to provide some fundamental information for developing more appropriate educational courses and to activate the fashion business. A total of 82 different departments related to fashion and apparel were selected from four-year domestic universities and the curricula recently posted on their internet websites were analyzed by descriptive statistics. More than half (53.7%) of the 82 departments were offering classes in the clothing construction field for 3 credits and 4 class hours. College affiliation of the departments that offered curricula in the clothing construction field was classified into 5 categories: the arts (34), human ecology (22), natural sciences (14), humanities/culture (9), and others (3). Human ecology category showed the highest results in the average class hours (3.9), the number of classes in the clothing construction field (7.6), and the percentage of the classes in the clothing construction field out of all major classes offered by the clothing department (19.9%). All 82 departments were classified into 3 categories of: fashion design (32), clothing (28), and fashion business (22). The clothing category showed the highest results in the average credits (2.8), class hours (3.8), the number of classes offered by the clothing construction field (7.6), and the percentage of the classes that offer clothing construction education out of all major classes offered by the clothing department (19.9%). The educational contents of clothing construction area were classified into 8 different categories of: basic theory and sewing, clothing construction, flat pattern, draping, tailoring and advanced clothing construction, pattern CAD, sewing science and apparel manufacturing process, and clothing construction for special needs. Among these categories, the draping category constituted 21.7% as the largest part. In addition, the distribution of classes offered by 4 academic years were analyzed into 8 different categories.

• Journal of Biomedical Engineering Research
• /
• v.29 no.1
• /
• pp.59-65
• /
• 2008

Nowadays, implantable hearing aids have been developed to solve the problems of conventional hearing aids. In case of fully implantable hearing aids, an implantable microphone is necessary to receive sound signal beneath the skin. Normally, an implantable microphone has poor frequency response characteristics in high frequency bands of acoustic signal due to the high frequency attenuation effect of skin after implantation to human body. In this paper, the implantable microphone is designed to reduce the high frequency attenuation effect of a skin by putting its resonance frequency at the attenuated range through a finite element analysis (FEA) simulation. The designed implantable microphone through the simulated results has been fabricated by manufacturing process using bio-compatible materials. By the several in-vitro experiments with pig skin, it has been verified that the designed implantable microphone has a resonance frequency around the starting part of the attenuated range and reduces the attenuation effect.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.2
• /
• pp.74-79
• /
• 2002

In the a rapid changes of the semiconductor manufacturing technologies for early 21st century, it may be safely said that a kernel of terms is the size increase of Si wafer and the size decrease of semiconductor devices. As the size of Si wafers increases and semiconductor device is miniaturized, the units of cleaning processes increases. A present cleaning technology is based upon RCA cleaning which consumes vast chemicals and ultra pure water (UPW) and is the high temperature process. Therefore, this technology gives rise to the environmental issue. To resolve this matter, candidates of advanced cleaning processes has been studied. One of them is to apply the electrolyzed water. In this work, Compared with surface on Si wafer with electrolyzed water cleaning and various chemicals cleaning, and analyzed Si wafer surface condition treated with elecoolyzed water by cleaning temperature and cleaning time. Especially. concentrate upon the contact angle. finally, contact angle on surface treated with cathode water cleaning is 17.28, and anode water cleaning is 34.1.