• 제목/요약/키워드: Advanced Systems Design (ADS)

검색결과 15건 처리시간 0.022초

Performance Study of Defected Ground Structure Patch Antenna with Etched psi (ψ) Shaped Stubs

  • Nadeem, Iram;Choi, Dong-You
    • Journal of information and communication convergence engineering
    • /
    • 제16권4호
    • /
    • pp.203-212
    • /
    • 2018
  • In this article, a novel design of patch antenna with wide band characteristics is presented. The proposed antenna is having electrical dimensions of $0.14{\lambda}{\times}0.11{\lambda}$ (at lower initial frequency) and footprints of $150mm^2$. Structural parameters optimization shows 3.1-23.5 GHz frequency range for a (reflection coefficient) $S_{11}{\leq}-10dB$ and simulated gain 6.8 dB is obtained. An equivalent circuit model is proposed to get an insight view of antenna. Advanced Systems Design (ADS) simulation results are obtain which confirm the validity of proposed model. Degenerated foster canonical form has been used to explain the reactance and capacitive behavior idea of simulated proposed antenna's input impedance later on an equivalent circuit model and smith chart is also suggested. HFSS and CST have been used to analyze antenna behavior. The proposed antenna can be further used for microwave image detection applications.

7-11 GHz, 광대역 MPM 설계 및 제작 (Design and fabrication on 7-11 GHz, Broadband MPM)

  • 최길웅;이유리;김기호;최진주;소준호
    • 한국ITS학회 논문지
    • /
    • 제5권1호
    • /
    • pp.13-19
    • /
    • 2006
  • 본 논문에서는 7 - 11 GHz 대역에서 동작하는 광대역 Microwave Power Module (MPM)을 설계하고 제작하였다. MPM 은 TWT (Traveling Wave Tube)와 SSA (Solid State Amplifier)로 구성되며, TWT와 SSA의 이득을 최적으로 배분하여 잡음지수를 줄일 수 있도록 설계하였다. Agilent사의 ADS (Advanced Design System)을 이용하여 SSA의 컴퓨터 모델링과 시뮬레이션을 수행 하였으며, 직렬 분포형 증폭기 구조를 이용하여 설계 및 제작하였다. 제작된 광대역 MPM은 7 - 11 GHz 대역에서 8.3 - 10.02 dB의 잡음 지수, 9 GHz에서 38.12 dBm의 출력 전력이 측정되었다.

  • PDF

노인 암 환자의 사전의사결정에 대한 태도와 관련요인 (Factors Influencing Attitude toward Advance Directives of Older Cancer Patients)

  • 이민혜;박연환
    • 성인간호학회지
    • /
    • 제27권4호
    • /
    • pp.449-458
    • /
    • 2015
  • Purpose: The aims of this study were to identify the reported attitudes of older patients with cancer toward advance directives (ADs) and the factors associated with their attitudes toward ADs. Methods: The design was a cross-sectional survey. The age mean of the 130 participants were 70.8, and 66.2% of the participants were male. The data were collected at one university hospital in Seoul, South Korea during the period from October $1^{st}$ to December $5^{th}$ in 2013. The data collecting instruments were the Advance Directives Attitude Survey (ADAS) and questionnaires including socio-demographic and disease-related characteristics, family function. Results: 30.0% of the participants were aware of ADs, only 9% of them had been informed by healthcare providers. Most participants (93.1%) intended to complete ADs. The mean score of ADAS was 48.29. The stepwise linear regression analysis indicated that family function, perceived health status, period of education, and age accounted for a significant percentage (52.0%, p<.001) of the variance in participants' ADAS. The variable with the greatest effect was family function. Conclusion: The findings suggest that family function and attitude of older cancer patients need to be considered for adapting ADs to Korean health care systems. Healthcare providers should include family members in advanced care planning discussions.

항공교통정보 제공을 위한 FIS-B 설계 및 구현에 관한 연구 (A Study on FIS-B Design and Implementation for Providing Air Traffic Informations)

  • 조태환;송인성;장은미;윤완오;최상방
    • 한국항행학회논문지
    • /
    • 제15권6호
    • /
    • pp.970-976
    • /
    • 2011
  • 새로운 개념의 항행 시스템인 CNS/ATM(Communication Navigation Surveillance/Air Traffic Management)의 등장에 따라 항공 감시분야에서는 ADS-B(Automatic Dependent Surveillance-Broadcast) 시스템이 구축되고 있다. FIS-B(Flight Information Services-Broadcast)는 ADS-B의 핵심 요소 중의 하나로 기상정보를 비롯하여 각종 운항정보를 항공기에 제공하는 매우 중요한 역할을 한다. 본 논문에서는 FIS-B 표준을 검토하여 성능 요구조건을 분석하였고, 이를 바탕으로 FIS-B를 설계 및 구현하였다. 모의실험을 통해 FIS-B에 대한 성능을 확인하였으며, 본 연구는 향후 FIS-B의 연구 자료로써 유용하게 활용될 수 있을 것이다.

채널 추정 알고리즘을 이용한 비동기식 IMT-2000 (W-CDMA) 시스템의 성능 분석 (Analysis of Asynchronous IMT-2000 (W-CDMA) Systems Using Channel Estimation Algorithm)

  • 김병기;나인학;전준수;김철성
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
    • /
    • pp.77-80
    • /
    • 2002
  • In this paper, we analyze a physical layer of W-CDMA .system and design a transmitter and receiver by using ADS (Advanced Design System). Also, we simulated a link level performance with different channel estimation algorithm in Jakes fading channel environment. For the channel estimator, we used the WMSA(Weighted Multi-Slot Averaging) algorithm, EGE(Equal Gain Estimation) algorithm and SSE(Symbol-to-Symbol Estimation) algorithm. This study will be useful in the analysis and design of W-CDMA system.

  • PDF

분산증폭기 기반 5GHz FIR 필터 LNA 설계 (Design of 5GHz FIR filter LNA based on a Distribute Amplifier)

  • 여협구;정승민
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2012년도 추계학술대회
    • /
    • pp.842-844
    • /
    • 2012
  • 본 논문에서는 분산증폭기 구조를 기반으로 한 5GHz FIR 필터 low noise amplifier (LNA)를 설계하고 그 특성을 분석한다. 설계된 FIR 필터 LNA는 MA(Moving Average) 필터 특성을 가져 주파수의 선택도를 높였으며, GaAs 기반 개별 소자를 이용한 proto-type 회로를 FR4 PCB와 유전율 ${\varepsilon}_r=10.2$를 가지는 고주파수용 PCB위에 구성하여 ADS(Advanced Design System)로 시뮬레이션 하였다. 시뮬레이션 결과 5GHz 주파수 대역에서 약 10dB 정도의 전력이득을 가지는 LNA 출력 특성과 MA FIR 필터 형태 주파수 선택적인 응답을 보여주었다. FIR 필터 형태의 LNA 설계를 통하여 RF 시스템에서 다양한 형태의 증폭기 및 필터 응용의 가능성을 기대해 볼 수 있다.

  • PDF

방사형 공진기를 이용한 고격리도 SPDT 스위치 연구 (A Study on a SPDT Switch with High Isolation Using Radial Resonators)

  • 소유리;곽운건;이재국;이민재;이종철
    • 한국ITS학회 논문지
    • /
    • 제22권6호
    • /
    • pp.223-229
    • /
    • 2023
  • 본 논문에서는 3.6 ~ 4.0 GHz 대역의 6단의 방사형 스터브 공진기를 갖는 SPDT(Single Pole Double Throw) 스위치를 제안한다. SPDT 스위치는 무선통신회로 설계 툴인ADS(Advanced Design Software) 시뮬레이션을 통해 pcb 기판 위에 제작되었다. SPDT 스위치 측정결과, 격리도는 평균 90 dB, 삽입 손실은 1.5 dB 정도인 것으로 나타났다. 본 논문에서 제안한 스위치는 현재 연구되어 있거나 상용화 되어 있는 비슷한 구조의 스위치들보다 해당 주파수 대역에서 평균 20dB 이상의 고격리도를 나타내고 있다. 제안된 SPDT 스위치는 WiMAX, LTE/5G, WiFi 및 HyperLAN과 같은 다중 대역 RF front-end 시스템에 적용 가능하다.

Twin-well Non-epitaxial CMOS Substrate에서의 노이즈 분석을 위한 Substrate Resistance 및 Guard-ring 모델링 (A Substrate Resistance and Guard-ring Modeling for Noise Analysis of Twin-well Non-epitaxial CMOS Substrate)

  • 김봉진;정해강;이경호;박홍준
    • 대한전자공학회논문지SD
    • /
    • 제44권4호
    • /
    • pp.32-42
    • /
    • 2007
  • [ $0.35{\mu}m$ ]twin-well non-epitaxial CMOS 공정에서의 substrate noise에 의한 아날로그 회로의 성능 저하를 예측하기 위하여 substrate 저항을 모델링하였다. Substrate 저항 모델 방정식은 P+ guard-ring isolation에 적용되어 측정값과 일치함을 확인하였다. Substrate 저항을 네 가지 형태로 구분하고 각각에 대하여 semi-empirical 모델 방정식을 확립하여, 측정값과 비교하여 rms 오차가 10% 미만이 되었다. 이 substrate 저항 모델을 guard-ring에 의한 isolation 구조에 적용하기 위하여 모델 방정식과 ADS(Advanced Design System) 회로 시뮬레이션에 의한 결과와 Network Analyzer의 측정 결과를 비교하였고, 비교적 잘 일치함을 확인하였다.

효율적인 다중 버전 ADS-B 타깃 리포트 메시지 처리를 위한 모듈 설계 및 구현 (Design and Implementation for Efficient Multi Version ADS-B Target Report Message Processing)

  • 김강희;장은미;송인성;조태환;최상방
    • 한국항행학회논문지
    • /
    • 제19권4호
    • /
    • pp.265-277
    • /
    • 2015
  • ADS-B (automatic dependent surveillance-broadcast)는 차세대 항행시스템 CNS/ATM (communication, navigation and surveillance/air traffic management)의 핵심기술로 위성항법시스템 정보를 이용하여 자신의 위치 정보를 자동으로 방송하며, 기존 레이더 시스템에 비해 지형에 의한 제약이 적고 갱신 속도가 빠르다는 장점을 가지고 있다. EUROCONTROL에서는 항공관제시스템에서 ADS-B 메시지를 교환하기 위하여 표준 감시자료 포맷 ASTERIX (all purpose structured eurocontrol surveillance information exchange) CAT.021을 정의하였다. 그러나 ASTERIX CAT.021은 업데이트 주기가 빠르고 이전 버전과 호환이 되지 않는 문제가 있다. 본 논문에서는 ASTERIX CAT.021의 버전과 관계없이 효율적으로 메시지를 처리하는 모듈을 설계 및 구현하였다. 구현 모듈은 네트워크로부터 수신한 메시지를 수집하여 패턴을 생성하고, 이후 수신 메시지는 패턴에 따라 정의된 루틴으로 처리한다.

UWB 시스템을 위한 TDMG 펄스 발생기의 설계 (Design of the TDMG pulse generator for ultra-wideband systems)

  • 박진환;배백근;고영은;방성일
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
    • /
    • pp.27-30
    • /
    • 2004
  • This paper has been designed the TDMG(Time Delay Multiple Gaussian) pulse generator for UWB systems and analyzed the characteristics of UWB impulse. Composite two equal Gaussian pulses in a difference time lag, and then investigated TDMG pulse and modeled mathematically. Designed the TDMG pulse generator by ADS(Advanced Design System) to embody by using actual element with such mathematical model. As well as, this paper finally proved an excellence of the TDMG pulse generator by performing analysis through simulation.

  • PDF