• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.733-743
• /
• 2016

The purpose of this study is to present a rational depreciation method for a pyroprocess cost calculation. Toward this end, the so-called advanced decelerated depreciation method (ADDM) was developed that complements the limitations of the existing depreciation methods such as the straight-line method and fixed percentage of declining-balance method. ADDM was used to show the trend of the direct material cost and direct labor cost compared to the straight-line or fixed percentage of the declining-balance methods that are often used today. As a result, it was demonstrated that the depreciation cost of the ADDM, which assumed a pyroprocess facility's life period to be 40 years with a deceleration rate of 5%, takes up 4.14% and 27.74% of the pyroprocess unit cost ($781/kg heavy metal) in the $1^{st}$ and final years, respectively. In other words, it was found that the ADDM can cost the pyroprocess facility's capital investment rationally every year. Finally, ADDM's validity was verified by confirming that the sum of the depreciation cost by year, and the sum of the purchasing cost of the building and equipment, are the same.

• Journal of Advanced Marine Engineering and Technology
• /
• 제5권1호
• /
• pp.34-51
• /
• 1981

Lately, due to increasing engine output by high supercharging, heavy crankshaft and propeller mass, as well as long strokes attended with the reduced crankshaft axial stiffness, the critical crankshaft axial vibration has frequently appeared in maneuvering range of the engine. Some investigators have developed calculating methods of natural frequencies and resonant amplitudes for crankshaft axial vibrations. But their reliabilities are uncertain as the estimated crankshaft axial stiffness are incorrect. The calculating procedure of these natural frequencies is practically analogous to the classical calculation of torsional vibration frequencies, except for an important difference due to the relationship of the axial stiffness of a crank and the angle between the crank and other, especially the adjacent, cranks. In this paper, 6 calculation formulae of crankshaft axial stiffness already published and a theoretically- developed one by authors are checked by comparing their calculating results with those measured values of one model crankshafat and three full-scale actual crankshafts. Also, the calculating methods of the crankshaft axial free vibration are investigated and their computer programs are developed. Finally, those developed computer programs are applied to calculating one model crankshaft and two full-scale actual crankshafts of ship's propulsion engines and their calculated results are compared with those measured values.

• 물과 미래
• /
• 제28권4호
• /
• pp.125-136
• /
• 1995

특정곡선을 고려한 ELM을 이송-확산방정식에 적용하여 그 결과를 Eulerian 기법(Stone-Brian, QUICKEST)과 비교하였다. 이송항의 계산을 위해서는 Lagrangian 보간법과 Cubic spline 보간법을 이용하였고 확산항의 계산에 있어서는 Crank-Nicholson 방법을 이용하였다. 수치모형의 적용결과는 다음과 같다. (1) Gaussian hill에의 적용:Lagrangian 보간법을 사용하여 계산한 경우가 가장 정확한 결과를 보였다. Cubic spline 보간법을 사용한 경우와 QUICKEST 방법의 경우에는 Peclet수가 50인 경우에 감쇠현상을 보였다. Stone-Brian방법은 Peclet수 10,50에서 위상오차가 발생하였다. (2) Advanced front에의 적용: 모든 방법이 Peclet수 1,4에서 정확한 결과를 얻었다. Peclet수가 50인 경우에 Lagrangian 보간법을 사용하여 계산한 경우와 Stone-Brian 방법은 증폭오차가 발생하였고 Cubic spline 보간법을 사용한 경우와 QUICKEST 방법의 경우는 수치진동 현상을 보였다.

• Progress in Superconductivity
• /
• 제5권2호
• /
• pp.144-148
• /
• 2004

Uniform current distribution among conductor layers in HTS cables using IPTs (inter-phase transformers) was investigated. Conventional methods for current distribution, in which resistors are inserted to conductor layers, causes additional loss. In contrast, IPTs, which use magnetic coupling, make it possible that the current in parallel circuits is distributed uniformly with any load, and minimize the loss. In this study, IPTs were designed and fabricated for examination of uniform current distribution in the conductor layers of HTS cables. The ITP was designed through calculation of its impedance that can cancel the inductance of the conduction layers. The experimental setup consisted of four IPTs and four inductors that simulate the conductor layer inductance. Each layer was designed to feed 10 A. We examined the behavior of current distribution with IPTs for various layer inductances.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 춘계학술발표회요약집
• /
• pp.124-124
• /
• 1999

An ultrasonic method is developed for the measurement of the two-phase mixture level in the reactor vessel or steam generator. The ultrasonic method is selected among the several non¬nuelear two-phase mixture level measurement methods through two steps of selection procedure. A commercial ultrasonic level measurement method is modified for application into the high temperature, pressure, and other conditions. The calculation method of the ultrasonic velocity is modified to consider the medium as the homogeneous mixture of air and steam. and to be applied into the high temperature and pressure conditions. The cross-correlation technique is adopted as a detection method to reduce the effects of the attenuation and the dif.JUsed reflection caused by suface fluctuation. The waveguides are developed to reduce the loss of echo and to remove the effects of obstructs. The present experimental study shows that the developed ultrasonic method measures the two-phase mixture level more accurately than the conventional methods do.

• Bulletin of the Korean Chemical Society
• /
• 제5권2호
• /
• pp.61-64
• /
• 1984

The molecular orbital calculations for solid HF are performed by using the pseudolattice method considering the coulomb lattice sum. In order to obtain the reliable net atomic charges and lattice energy of one dimensional chains, the limited counting of interactions terms up to second neighbours for zig-zag chain and third neighbours for linear chain are sufficient in this calculation. In three dimensional solid HF, the contribution of interaction energy between non-hydrogen bonded neighbours to lattice energy is about 3.5% and the lattice energy of nonpolar structure is stablized by 2.05 kcal/mole compared with that of polar structure. And, this method is further tested and compared with the other methods.

• Applied Microscopy
• /
• 제50권
• /
• pp.19.1-19.9
• /
• 2020

Deformation twinning, one of the major deformation modes in a crystalline material, has typically been analyzed using generalized planar fault energy (GPFE) curves. Despite the significance of these curves in understanding the twin nucleation and its effect on the mechanical properties of crystals, their experimental validity is lacking. In this comparative study based on the first-principles calculation, molecular dynamics simulation, and quantitative in-situ tensile testing of Al nanowires inside a transmission electron microscopy system, we present both a theoretical and an experimental approach that enable the measurement of a part of the twin formation energy of the perfect Al crystal. The proposed experimental method is also regarded as an indirect but quantitative means for validating the GPFE theory.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1304-1310
• /
• 2015

In remote islands, due to expense of existing generation systems, installation of photovoltaic cells (PVs) and wind turbines has a chance of reducing generation costs. However, in island power systems, even short-term power fluctuations change the frequency of grids because of their small inertia constant. In order to compensate power fluctuations, the authors proposed the power consumption control of pumps which send water to tanks. The power control doesn’t affect water users’ convenience as long as tanks hold water. Based on experimental characteristics of a pump system, this paper shows methods to determine reference power consumption of the system with compensation for short-term PV fluctuations while satisfying water demand. One method uses a PI controller and the other method calculates reference power consumption from water flow reference. Simulations with a PV and a pump system are carried out to find optimum parameters and to compare the methods. Results show that both PI control method and water flow calculation method are useful for satisfying the water demand constraint. The water demand constraint has a little impact to suppression of the short-term power fluctuation in this condition.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.579-584
• /
• 1999

The purpose of the present paper are not to develope machine tools of new concepts and advanced mechanisms but to introduce and apply new methods and concepts in the design procedure by using and changing the previously existing technologies. In this paper 3D modeller was proposed for designing machine tools and the design and the better manufacturability checking than 2D one so that design error was dramatically reduced. As designer may easily understand the real shape of a part and assembly object, it's easy to draw the drawings not only in a conceptual design but also in a detailed design. Also, design automation software enabled designer to consider the real important design parameters by reducing time to spend in estimating and calculating the strength of the model by the computer aided automatic calculation instead of a tedious and complex calculation by manual method and help him to easily make the decision for selecting the stocks and design the structure of part or unit of machine tools.

• Journal of Advanced Marine Engineering and Technology
• /
• 제9권2호
• /
• pp.159-169
• /
• 1985

The calculation of torsional vibration for marine diesel engine propulsion shafting is normally carried out by equalizing exciting energy to damping energy, or using the dynamic magnifier. But, with these methods, the vibration amplitudes are calculated only for resonance points and vibration amplitudes of other running speeds of engine are determined by the estimation. Recently, many energy-saving ships have been built and on these ships, two-stroke, supercharged, super-long stroke diesel engines which have a small number of cylinders are usually installed. In these cases, the first order critical-torsional vibrations of these engine shaftings appear ordinarily near the MCR speed and the stress amplitudes of their vibration skirts exceed the limit stress defined by the rules of classification society. To predict the above condition in the design stage, the synthesized vibration amplitudes of all orders which are summed up according to their phase angles must be calculated from the drawings of propulsion shaft systems. In this study, a theoretical method to fulfill the above calculation is derived and a computer program is developed according to the derived method. And a shafting system of two-stroke, super-long stroke diesel engine which was installed in a bulk carrier is analyzed with this method. The measured values of this engine shafting are compared with those of calculated results and they show a fairly good agreement.