• 콘크리트학회논문집
• /
• 제29권1호
• /
• pp.65-75
• /
• 2017

C-S-H 상은 시멘트 페이스트의 50~60%를 차지하는 중요한 수화생성물로서, 시멘트 페이스트의 공학적 특성을 결정짓는 가장 중요한 역할을 한다. 이것은 C-S-H 상이 본질적으로 안정되거나 강한 재료라서가 아니라 시멘트입자와 같이 결합하여 연속적인 레이어 층을 형성하기 때문이다. 결합상으로서 C-S-H 상은 나노 단위의 구조로부터 기인하는데, 내구성 측면에서는 염소이온의 흡착을 유발하는 것으로 알려져 있지만 그 메커니즘은 여전히 불분명하다. 그래서 본 연구에서는 C-S-H상이 염소이온 흡착에 미치는 거동을 살펴보고자 하였다. 본 연구의 목적은 다양한 Ca/Si 비율을 갖는 C-S-H 상이 염소이온을 흡착하는 시간의 존적 거동을 고찰하여 염소이온 고정화의 메커니즘을 구명하는 것이다. C-S-H 상은 순간적 물리흡착, 물리 화학적 흡착, 그리고 화학적 흡착의 3단계로 구분되어 순차적인 흡착거동을 보였는데, 순간적으로 흡착되는 표면착물량은 C-S-H 표면 대전체와 염소 이온간의 전기 상호작용에 의한 물리적 흡착에 의하여 발생한다. 높은 Ca/Si 비율에서 C-S-H 표면전하는 커지기 때문에 물리적 흡착은 커지지만 화학적 흡착은 오히려 작아지는 것으로 나타났다. 이는 C-S-H 표면에 물리적 흡착된 염소이온에 의하여 염소이온이 침투하지 못하고 화학적 흡착력까지 저하되기 때문으로 생각된다. 따라서 최대 염소이온 흡착력은 Ca/Si 비율 1.5에서 형성되었다.

• 광물과 암석
• /
• 제36권2호
• /
• pp.107-115
• /
• 2023

코발트는 합금산업에서 발생되는 산업 폐기물과 산성광산배수로 자연에 유입될 수 있으며 또한 고준위 방사성 폐기물을 구성하는 방사성 핵종(⁶⁰Co)기도 하다. 스멕타이트는 이들을 흡착 격리하는데 유용하게 사용될 수 있는 광물이다. 본 연구에서는 기존에 특성이 잘 알려진 스멕타이트 중 The Clay Mineral Society (CMS)의 source clay인 Cheto-type montmorillonite (Cheto-MM)를 사용하여 가열에 의한 탈수 전후 광물의 층간수 존재 여부에 따른 흡착 자리가 코발트 흡착에 미치는 영향을 평가하고, 흡착 속도 및 등온흡착식 모델을 적용하여 Cheto-MM의 코발트에 대한 흡착 기작을 연구하였다. 본 연구 결과 탈수 및 이에 따른 층간 수축에 의해 흡착 특성이 달라지는 것을 확인할 수 있었으며, 코발트는 Cheto-MM의 층 모서리 자리에서의 흡착이 약 38%, 층간 내부에서의 흡착이 약 62%를 차지하는 것으로 확인되었고 Cheto-MM의 코발트 흡착은 층간 내부에 의한 영향이 큰 것으로 판단된다. 이러한 흡착에 있어 흡착 속도 모델을 적용한 결과, Cheto-MM의 코발트 흡착 속도는 pseudo-second-order 모델로 설명되며 농도에 따른 흡착은 Langmuir 등온흡착 모델로 가장 잘 설명되었다. 본 연구는 몬모릴로나이트의 흡착 자리에 따른 코발트의 흡착 양상에 대한 기본지식을 제공하고, 추후 고준위 방사성 폐기물 처분장에서의 스멕타이트의 흡착 거동을 예측하는데 유용하게 사용될 수 있을 것으로 생각된다.

• 대한화학회지
• /
• 제55권3호
• /
• pp.364-372
• /
• 2011

다양한 억제제의 농도, 온도, 유속에서 중량 분석과 변전위 분극법을 이용하여 0.25 M 황산 용액상에 있는 연강철에 대한 imatinib mesylate (IMT)의 부식 억제를 연구하였다. 억제제의 농도가 증가함에 따라 억제 효과가 증가한다는 결과를 얻었다. 연강철 표면 위의 흡착 과정은 Langmuir 흡착 등온선을 따른다. 얻어진 흡착 깁스 자유 에너지의 값은 연강철 위의 IMT의 흡착 과정이 화학흡착이라는 것을 보여준다. 열역학 변수들이 계산되고, 논의되었다. IMT의 HOMO와 LUMO의 전자궤도 밀도 분포는 억제 메커니즘을 논의하는데 이용되었다. FT-IR 분광학과 SEM 이미지는 필름에 흡착된 표면을 분석하기 위해 사용되었다.

• 상하수도학회지
• /
• 제21권3호
• /
• pp.349-357
• /
• 2007

Reports of endocrine disrupting compounds (EDCs), pharmaceutically active compounds (PhACs), and personal care products (PCPs) have raised substantial concern in important potable drinking water quality issues. Our study investigates the removal of EDCs, PhACs, and PCPs of 10 compounds having different physico-chemical properties (e.g., molecular weight, and octanol-water partition coefficient ($K_{OW}$)) by nanofiltration (NF) membranes. The rejection of micropollutants by NF membranes ranged from 93.9% to 99.9% depending on solute characteristics. A batch adsorption experiments indicated that adsorption is an important mechanism for transport/removal of relatively hydrophobic compounds, and is related to the octanol-water partition coefficient values. The transport phenomenon associated with adsorption may also depend on solution water chemistry such as pH and ionic strength influencing the pKa value of compounds. In addition, it was visually seen that the retention was somewhat higher for the larger compounds based on their molecular weight. These results suggest that the NF membrane retains many organic compounds due to both hydrophobic adsorption and size exclusion mechanisms.

• Macromolecular Research
• /
• 제15권1호
• /
• pp.51-58
• /
• 2007

The approach studied in the present work produced an exfoliated state of clay layers via confinement of the charged nano-sized polystyrene (PS) beads within the gallery of swollen pristine clay. It was demonstrated that adsorption of the polymer nanobeads dramatically promotes expansion of the clay gallery. A comparative study of incorporation was conducted by employing organo-modified clay along with two different colloid polymer systems: electrostatically stabilized PS nanobeads and cationic monomer-grafted PS nanobeads. The mechanism of adsorption of the monomer-grafted polymer beads onto clay via cationic exchange between the alkyl ammonium group of the polymer nanobeads and the interlayer sodium cation of the layered silicate was verified by using several techniques. As distinct from the polymer nanobeads formed using conventional miniemulsion polymerization method, competitive adsorption of stabilizing surfactant molecules was be prevented by grafting the surface functional groups into the polymer chain, thereby supporting the observed effective adsorption of the polymer beads. The presence of surface functional groups that support the establishment of strong polymer-clay interactions was suggested to improve the compatibility of the clay with the polymer matrix and eventually play a crucial role in the performance of the final nanocomposites.

• 한국환경농학회지
• /
• 제16권2호
• /
• pp.115-118
• /
• 1997

When the light metals such as $Ca^{++}$ and $Mg^{++}$ were added to heavy metal solution, the adsorption of heavy metals was increased by 20 to 30% more, but there were no differences between species. $Pb^{++}$ was the most adsorbed metal(99.5%), and the adsorption ratio of $Cd^{++}$ was significantly improved. In addition, when the light metal concentration was increased to 100ppm, the adsoption ratios of all four heavy metals were reached to 92 to 99%, while coniferous barks showed only 85 to 92%. On the mixture of four heavy metals, the adsorbed amount of each metal was significantly reduced, compared with that of one heavy metal, while $Zn^{++}$ showed the adsorption improvement to 95%. On the column experiment, $Pb^{++}$ was almost completely adsorbed in the upper part of column, and the adsorbed amount of $Cu^{++}$ was gradually decreased depending on column depth. However, $Cd^{++}$ and $Zn^{++}$ were not influenced by column height, and constantly adsorbed on various column height. Based on the above results, each heavy metal had different adsorption mechanism.

• Advances in environmental research
• /
• 제4권2호
• /
• pp.135-142
• /
• 2015

In this study, we evaluated the adsorption/desorption of uranium (U) in pure soil environment using continuous column reactor. We additionally investigated the adsorption/desorption mechanism of U on vivianite surface in molecular scale using quantum calculation. We observed that below $0.1{\mu}M$ of U was detected after 20 d from U injection ($1{\mu}M$) in adsorption test. However, all of absorbed U was detached from vivianite surface in 24 h by injection of CARB solution ($1.44{\times}10^{-2}M\;NaHCO_3$ and $2.8{\times}10^{-3}M\;Na_2CO_3$). Based on exchange energy calculation, we found that $UO_2(CO_3)_2{^{2-}}$ and $UO_2(CO_3)_3{^{4-}}$ species have higher repulsive energy than $UO_2(OH)_2$ species. The results obtained from this study could be applied to predict the behavior of uranium in contaminated and remediation sites.

• 한국환경과학회지
• /
• 제22권10호
• /
• pp.1327-1335
• /
• 2013

Na-A zeolite (Z-Cl) was synthesized from coal fly ash, which is a byproduct of coal combustion for the generation of electricity. The adsorption of $Cu^{2+}$ and $Zn^{2+}ions$ onto Z-C1 was investigated via batch tests over a range of temperatures (303.15 to 323.15 K). The resultant experimental equilibrium data were compared to theoretical values calculated using model equations. With these results, the kinetics and equilibrium parameters of adsorption were calculated using Lagergren and Langmuir-Freundlich models. The adsorption kinetics revealed that the pseudo second-order kinetic mechanism is predominant. The maximum adsorption capacity ($q_{max}$) values were 139.0-197.9 mg $Zn^{2+}$/g and 75.0-105.1 mg $Cu^{2+}/g$. Calculation of the thermodynamic properties revealed that the absorption reactions for both $Cu^{2+}$ and $Zn^{2+}$ were spontaneous and endothermic. Collectively, these results suggest that the synthesized zeolite, Z-C1, can potentially be used as an adsorbent for metal ion recovery during the treatment of industrial wastewater at high temperatures.

• Journal of Electrochemical Science and Technology
• /
• 제11권2호
• /
• pp.117-131
• /
• 2020

The adsorption of N-[(E)-Pyridin-2-ylmethylidene] aniline, a Schiff base, on to mild steel surface in 1M HCl and 0.5 M H₂SO₄ solutions and the consequent corrosion protection were studied employing weight loss method, electrochemical impedance spectroscopy and potentiodynamic polarization measurements. DFT calculations were performed to investigate its interaction with the metal surface at the atomic level to understand its inhibition mechanism. The adsorption process is well described by the Langmuir isotherm. The thermodynamic parameters indicated that the adsorption is spontaneous and the interaction of the inhibitor at the mild steel surface is mainly through physisorption. The R_a values obtained in AFM studies for the uninhibited and inhibited sample in HCl media respectively are 0.756 and 0.559 ㎛, and that in H₂SO₄ media are 0.411 and 0.406 ㎛. The lesser roughness values of the inhibited sample shows the adsorption of the molecules onto the mild surface. The inhibition efficiencies were found to improve with concentration of the inhibitor and the maximum efficiency was observed at 400ppm in all the investigation methods adopted. The inhibitor was found to exhibit a higher efficiency in HCl media (95.7%) than in H₂SO₄ (92.8%). The theoretical and experimental results are found to be in good agreement.

• Journal of Electrochemical Science and Technology
• /
• 제7권2호
• /
• pp.153-160
• /
• 2016

The inhibition ability of N,N-bis(2,4-dihydroxyhydroxybenzaldehyde)-1,3-Propandiimine (DHBP) as a schiff base against the corrosion of API-5L-X65 steel in 1 M HCl solution was evaluated by electrochemical impedance spectroscopy, potentiodynamic polarization and scanning electron microscopy. Electrochemical impedance studies indicated that DHBP inhibited corrosion by blocking the active corrosion sites. The inhibition efficiency increased with increasing inhibitor concentrations. EIS data was analysed to equivalent circuit model and showed that the charge transfer resistance of steel increased with increasing inhibitor concentration whilst the double layer capacitance decreased. The adsorption of this compound obeyed the Langmuir adsorption isotherm. Gibbs free energy of adsorption was calculated and indicated that adsorption occurred through physical and spontaneous process. The corrosion inhibition mechanism was studied by potential of zero charge. Polarization studies indicated that DHBP retards both the cathodic and anodic reactions through adsorption on steel surface. Scanning electron microscopy was used to study the steel surface with and without inhibitor.