• 공업화학
• /
• 제26권5호
• /
• pp.581-586
• /
• 2015

입상 활성탄을 사용하여 수용액으로부터 Safranin의 흡착에 대해 조사하였다. 회분식 실험은 흡착제의 양, 초기농도와 접촉시간과 온도를 흡착변수로 사용하여 수행하였다. 흡착평형자료는 Langmuir, Freundlich 및 Dubinin-Radushkevich식을 사용하여 해석한 결과 Freundlich식이 가장 좋은 일치도를 나타냈다. 평가된 Langmuir 분리계수, $R_L=0.183{\sim}0.254$와 Freundlich 분리계수, 1/n = 0.518~0.547로부터 이 흡착공정이 적절한 처리방법이 될 수 있음을 알았다. 흡착속도실험자료를 유사1차 및 유사2차 반응속도식에 적용해 본 결과는 유사2차반응속도식에 잘 맞는 것으로 나타났다. 음수값의 Gibbs 자유에너지(${\Delta}G=-3.688{\sim}-7.220kJ/mol$)와 양수값의 엔탈피(${\Delta}H=33.126kJ/mol$)는 흡착이 자발적이고 흡열공정으로 진행된다는 것을 나타냈다.

• Korean Chemical Engineering Research
• /
• 제58권2호
• /
• pp.301-306
• /
• 2020

We investigated the individual biosorption removal of lead, copper, and nickel ions from aqueous solutions using Chara sp. algae powder in a batch mode. The impact of several parameters, such as initial concentration of the metal ions, contacting time, sorbent dose, and pH on the removal efficiency, was investigated. The maximum removal efficiency at optimum conditions was found to be 98% for Pb(II) at pH = 4, 90% for Cu(II) at pH = 5, and 80% for Ni(II) at pH = 5. The isotherm study was done under the optimum conditions for each metal by applying the experimental results onto the well-known Freundlich and Langmuir models. The results show that the Langmuir is better in describing the isotherm adsorption of Pb(II) and Ni(II), while the Freundlich is a better fit in the case of Cu(II). Similarly, a kinetic study was performed by using the pseudo-first and second-order equations. Our results show that the pseudo-second-order is better in representing the kinetic adsorption of the three metal ions.

• 한국환경과학회지
• /
• 제29권8호
• /
• pp.827-835
• /
• 2020

Zeolite material having XRD peaks of Na-A zeolite in the 2θ range of 7.18 to 34.18 can be synthesized from the waste catalyst using a fusion/hydrothermal method. The adsorption rate of Mn ions by a commercial Na-A zeolite and the synthesized zeolitic material increased as the adsorption temperature increased in the range of 10 ~ 40℃. The adsorption of Mn ion were very rapid in the first 30 min and then reached to the equilibrium state after approximately 60 min. The adsorption kinetics of Mn ions by the commercial Na-A zeolite and the zeolitic material were found to be well fitted to the pseudo-2^nd order kinetic model. Equilibrium data by the commercial Na-A zeolite and the zeolitic material fit the Langmuir, Koble-Corrigan, and Redlich-Peterson isotherm models well rather than Freundlich isotherm model. The removal capacity of the Mn ions by the commercial Na-A zeolite and the zeolitic material obtained from the Langmuir model was 135.2 mg/g and 128.9 mg/g at 30℃, respectively. The adsorption capacity of Mn ions by the synthesized zeolitic material was almost similar to that of commercial Na-A zeolite. The synthesized zeolitic material could be applied as an economically feasible commercial adsorbent.

• 공업화학
• /
• 제26권2호
• /
• pp.210-216
• /
• 2015

석탄계 입상 활성탄을 사용하여 수용액으로부터 brilliant blue FCF 염료의 흡착에 대해 조사하였다. 회분식 실험은 흡착제의 양, 초기농도와 접촉시간과 온도를 흡착변수로 사용하여 수행하였다. 흡착평형자료는 Langmuir, Freundlich 및 Temkin 식을 사용하여 해석한 결과 Freundlich 식이 가장 좋은 일치도를 나타냈다. 평가된 Freundlich 상수(1/n = 0.129~0.212)로부터 이 흡착공정이 적절한 처리방법이 될 수 있음을 알았다. 흡착속도실험자료를 유사일차 및 유사이차 반응속도식에 적용해 본 결과는 유사이차반응속도식에 잘 맞는 것으로 나타났다. 음수값의 Gibbs 자유에너지(-4.81~-10.33 kJ/mol)와 양수값의 엔탈피(+78.59 kJ/mol)는 흡착이 자발적이고 흡열공정으로 진행된다는 것을 나타냈다.

• Korean Chemical Engineering Research
• /
• 제58권1호
• /
• pp.127-134
• /
• 2020

상용흡착제 실로퓨트에 의한 Taxus chinensis 유래 주요 타르 성분인 아세나프텐의 흡착 특성을 조사하였다. 초기 아세나프텐 농도, 흡착 온도 및 시간에 따른 흡착 데이터를 Langmuir, Freundlich, Temkin 및 Dubinin-Radushkevich 등온흡착식에 적용한 결과, Langmuir 등온흡착식이 가장 적합하였다. 동역학적 흡착 데이터는 유사 이차 속도식에 가장 잘 따름을 알 수 있었다. 열역학적 파라미터로부터 흡착 공정이 적합하며 비자발적 발열이었다. 등량흡착열은 흡착량에 의존하지 않아 실로퓨트의 표면에너지가 균일함을 알 수 있었다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
• /
• pp.219-222
• /
• 2004

Removal characteristics of Mn and Co was studied from the contaminated solutions via surface reaction with various calcium carbonate (calcite). Synthetic calcium carbonates which has different surface morphology as well as surface areas were prepared by a spontaneous precipitation method and used. Mn and Co removal behavior by the different solid surface demonstrate characteristic sorption behaviors depend on the type of calcite used, such as surface area or surface morphology. Calcium carbonate crystals (mostly calcite) which exhibit complicated surface morphology (c-type) shows strong sorption affinity for Mn and Co removal via sorption than on the a-type or b-type calcite crystals of less complicated surfaces. The applicability of two kinetic models, the pseudo-first-order kinetic equation and the Elovich kinetic model was examined on these sorption behavior. Elovich kinetic model was found more suitable to explain the very early stage adsorption kinetics, while the pseudo-first-order kinetic equation was successfully fitted for the adsorption kinetics after 50 hours.

• 청정기술
• /
• 제17권4호
• /
• pp.346-352
• /
• 2011

활성탄에 의한 프로피네브 농약의 흡착특성을 초기농도, 접촉시간과 온도를 고려한 회분식 실험을 통해 조사하였다. Langmuir 식과 Freundlich 식을 사용하여 흡착등온선과 상수값을 구하였다. 흡착평형관계는 Freundlich 등온식이 잘 맞았으며, 흡착등온선의 기울기 값으로부터 활성탄에 의한 프로피네브의 효과적인 처리가 가능하다는 것을 알 수 있었다. 유사일차반응속도식과 유사이차반응속도식을 사용하여 동력학적 실험값을 평가한 결과, 유사이차반응속도식이 더 잘 맞았으며, 속도상수 ($k_2$) 값은 프로피네브의 초기농도가 증가할수록 감소하였다. 활성화에너지, 표준엔탈피, 표준엔트로피 및 표준자유에너지를 평가하였는데, 조사된 표준자유에너지값은 298, 308 및 318 K에서 각각 -7.28, -8.27 및 -11.66 kJ/mol로 나타나 흡착공정이 자발적임을 알 수 있었다. 엔탈피변화량은 54.46 kJ/mol 로 양의 값을 나타내어 활성탄에 대한 프로피네브의 흡착이 흡열반응으로 일어난다는 것을 알 수 있었다.

• Membrane and Water Treatment
• /
• 제7권5호
• /
• pp.403-416
• /
• 2016

The possibility of using carica papaya leaf powder for removal of copper from wastewater as a low cost adsorbent was explored. Different parameters that affect the adsorption process like initial concentration of metal ion, time of contact, adsorbent quantity and pH were evaluated and the outcome of the study was tested using adsorption isotherm models. A maximum of 90%-94.1% copper removal was possible from wastewater having low concentration of the metal using papaya leaf powder under optimum conditions by conducting experimental studies. The biosorption of copper ion was influenced by pH and outcome of experimental results indicate the optimum pH as 7.0 for maximum copper removal. Copper distribution between the solid and liquid phases in batch studies was described by isotherms like Langmuir adsorption and Freundlich models. The adsorption process was better represented by the Freundlich isotherm model. The maximum adsorption capacity of copper was measured to be 24.51 mg/g through the Langmuir model. Pseudo-second order rate equation was better suited for the adsorption process. A dynamic mode study was also conducted to analyse the ability of papaya leaf powder to remove copper (II) ions from aqueous solution and the breakthrough curve was described by an S profile. Present study revealed that papaya leaf powder can be used for the removal of copper from the wastewater and low cost water treatment techniques can be developed using this adsorbent.

• Advances in environmental research
• /
• 제7권1호
• /
• pp.53-71
• /
• 2018

Waste glass disposal causes environmental problems in the cities. To find a suitable green environmental solution for this problem low cost adsorbent in this study was prepared from waste glass. An effective new green adsorbent was synthesized by hydrothermal treatment of waste glass (WG), followed by acidic activation of its surface by HCl (WGP). The prepared adsorbent was characterized by scanning electron microscopy (SEM), X-ray fluorescence (XRF), X-ray diffraction (XRD), and BET surface measurement. The developed adsorbent was used for the removal of heavy metals (Cd, Cu, Fe, Pb and Zn) from well water. Batch experiments were conducted to test the ability of the prepared adsorbent for the removal of Cd, Cu, Fe, Pb and Zn from well water. The experiments of the heavy metals adsorption by adsorbent (WGP) were performed at different metal ion concentrations, solution pH, adsorbent dosage and contact time. The Langmuir and Freundlich adsorption isotherms and kinetic models were used to verify the adsorption performance. The results indicated high removal efficiencies (99-100%) for all the studied heavy metals at pH 7 at constant contact time of 2 h. The data obtained from adsorption isotherms of metal ions at different time fitted well to linear form of the Langmuir sorption equation, and pseudo-second-order kinetic model. Application of the resulted conditions on well water demonstrated that the modified waste glass adsorbent successfully adsorbed heavy metals (Cd, Cu, Fe, Pb and Zn) from well water.

• Advances in environmental research
• /
• 제5권1호
• /
• pp.37-50
• /
• 2016

The main objective of this study is to evaluate adsorptive removal of Methylene Blue (MB) dye from aqueous solution using pumice powder. The effects of pH, adsorption time, agitation speed, adsorbent dose, and dye concentrations on dye adsorption were investigated. Process kinetics and isotherm model constants were determined accordingly. The results showed that adsorbent dose, dye concentration and agitation speed are the important parameters on dye adsorption and the removal of MB did not significantly change by varying pH. A total adsorption process time of 60 min was observed to be sufficient to effectively remove 50 mg/L MB concentration. The MB adsorption data obeyed both pseudo first order and second order kinetic models. Adsorption of MB by pumice fitted well both Langmiur and Freundlich isotherms ($R^2{\geq}0.9700$), except for 150 rpm agitation speed that system fitted only Langmiur isotherm. The results of this study emphasize that pumice powder can be used as a low cost and effective adsorbent for dye removal.