• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.561-568
• /
• 2011

The purpose of this study is to measure displacements that occurs on a surface and interior of slope model and the shape when the slope is destroyed at vibration experiment of the slope model using close range photogrammetry. The circle targets and sphere targets are installed on a chamber and a slope model, while the earthquake wave are applied in regular time interval. The close range photogrammetric images are acquired in each displacements step until the slope model is destroyed. Those photos are processed by image processing method and the center points of targets are automatically extracted. Furthermore, the three-dimensional coordinates of targets are calculated by image orientation and bundle adjustment processing. As a result, amount of displacement at each level is precisely measured and provided the basic information for assessing the slope stability using three-dimensional measurement of the target movement and slope destruction.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.46-53
• /
• 2001

Differing Site Conditions('DSC') Claims among construction claims are on the increase as a direct result of the steady construction of Social Overhead Capital Facilities initiated by Government. As DSC claims generally became apparent during the intial stage of the construction project, it is necessary to timely review and study the proposal on the prevention of DSC claims because delayed settlement will incur more substantial damages to all parties concerned. This research is focused on the identification and analysis of the causes for DSC claims as applicable to design-build project in public sector and it presents the possible short term, medium and long term proposals on the improvement of causes related with DSC claims. The major results of this research are summarized as follows: 1. Improvement of contractor's tender practice 2. Contractor's division of responsibility on the site survey 3. Improvement of owner's exculpatory clause 4. Flexibility on the adjustment of contract amount The proposals stated above could be useful in resolving the DSC claims between owner and contractors.

• Journal of Korean Academy of Nursing
• /
• v.33 no.1
• /
• pp.122-129
• /
• 2003

Purpose: The purpose of this study is to examine the difference of direct nursing activity and patient outcomes as mortality rate, complication rate, readmission rate and length of stay related to graded fee of nursing management for inpatient. Method: The subjects of this study were 44 general hospitals with more than 500 beds. Data totaled to 86,044 claims provided to inpatients in Jan. 2001 requested by an electronic data interchange from a Health Insurance Review Agency. The data was analyzed by SPSS win(ver.10.0) and statistical methods used were frequency, one-way ANOVA, $X^2$-Test and regression. Result: Synthetic judgment through performance index and 95% confidence interval, direct nursing activity showed to provided adequate quality of nursing care on 2nd, 3rd, 4th and 6th nursing degree. Also, patient outcomes showed difference by graded fee of nursing management for inpatient. Mortality rate of 2nd was the lowest with P.I. 67.9, 3rd, 5th, 6th, 4th in order. In case of complication rate, 2nd, 3rd and 4th were lower than other nursing degree. Readmission rate of 4th and 5th was the lowest. Length of stay of 2nd was the shortest with P.I. 88.3, 3rd, 4th, 5th, 4th, 6th in order. Conclusion: The findings from this study showed that, the higher nurse-to-patient ratio, the greater amount of direct nursing care activity for the patient. Also, the more direct nursing activities influenced a lower mortality rate, complication rate and readmission rate, shorter length of stay.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.18 no.3 s.39
• /
• pp.23-37
• /
• 1990

The purpose of this study was to suggest, an ameliorated, 'standard of estimated unit manpower & material' in the Landscape Planting Work. To achieve this goal of this study, following process was performed to reach more advanced results. First, relevant domestic & foreign references were gathered & analyzed with a viewpoint of the system & contents within, Second, most similar foreign country‘s relevant 10 forms & actual site were surveyed, Third, actual site data were collected from the 17 selected landscape Planting sites Fourth, the collected data from reference study & actual site survey were analyzed and calculated. And Finally, analyzed data were reorganized & rearranged in good order with 3 principles to produce more ameliorated 'Standard of estimated unit manpower & material' in the landscape Planting Work. The suggested main results of this study include, 1. Reorganization of current system to transplanting(includes excavation & root ball wrapping), planting(includes tree & shrub), turfing & maintenance 2. Deletion of the Range of 'account of labor' & simultaneous distribution of 'account of labor' with a proposed regular ratio 3. Adjustment of the range of the plant's size 4. Amelioration of the level of 'Account of labor' 5. New establishment in maintenance items as Watering, Fertilizing & spraying chemicals on turf area. 6. Readjustment & new establishment of the backfill volume. 7. Actualization, readjustment & new establishment of the transportation amount.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.771-780
• /
• 2013

Inspection system which was performed in the past selected the final winning bidder by separating Pre-Qualification, the basic design evaluation and price evaluation. However, turnkey and alternative bidding construction has selected way to determine the successful bidder as the best design and the most low cost method, comprehensive evaluation method (bid price adjustment, design score adjustments, weights standard), the best design and the fixed amount method from january 1, 2010 to the present. Due to these institutional problems, orders institutions were often a way to determine the successful bidder to apply differently for identical or similar construction. Therefore this study winning bidder selection criteria through analysis of construction the number and construction order performance, order performance by work division and institutional orders, the weights bidder order performance and orders status of turnkey alternative tendering construction to civil part performed in domestic.

• Journal of the HCI Society of Korea
• /
• v.13 no.3
• /
• pp.65-73
• /
• 2018

Game balance settings are crucial to game design. Game balancing must take into account a large amount of numerical values, configuration data, and the relationship between elements. Once released and served, a game - even for a balanced game - often requires calibration according to the game player's preference. To achieve sustainability, game balance needs adjustment while allowing for small changes. In fact, from the producers' standpoint, game balance issue is a critical success factor in game production. Therefore, they often invest much time and capital in game design. However, if such a costly game cannot provide players with an appropriate level of difficulty, the game is more likely to fail. On the contrary, if the game successfully identifies the game players' propensity and performs self-balancing to provide appropriate difficulty levels, this will significantly reduce the likelihood of game failure, while at the same time increasing the lifecycle of the game. Accordingly, if a novel technology for game balancing is developed using artificial intelligence (AI) that offers personalized, intelligent, and customized service to individual game players, it would bring significant changes to the game production system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.626-632
• /
• 2003

In this paper, forward-wave -3㏈ directional coupler with finite-thickness conductor and asymmetrical coupled lines are designed and experimentally verified using mode-matching based design methodology. Most of studies published in the literatures about the coupled lines are mainly concentrated on the adjustment of coupling amount by changing various geometric configurations. The analysis results in this paper show that thicker metalization requires reduced coupler length in the forward-wave directional coupler composed of asymmetrical coupled lines. Several forward-wave directional -3 ㏈ couplers with finite metalization thickness composed of asymmetrical coupled microstrip lines have been designed in the 5 ㎓ based on proposed design method. The measured data show -4.05㏈∼-4.09㏈ coupling at center frequency which is very closed to design value. The tight coupling has been implemented with accurate design methodology which take mentalization thickness into account.

• The KIPS Transactions:PartA
• /
• v.16A no.2
• /
• pp.89-100
• /
• 2009

With the advance in digital technologies and the increasing prevalence of high quality multimedia contents, there is a growing user demand for multimedia devices, such as mobile phones, digital TV, PMP, digital camcoders, digital cameras. Such devices provide various services associated with multimedia file manipulation, including multimedia contents playback, multimedia file editing, etc. Conventional file systems exhibit a performance-related drawback that requires considerable amount of time and disk I/Os in order to store large-sized edited multimedia files. This paper proposes a fast, efficient writing technique for large-sized edited multimedia files by using data block sharing with adjustment of inode block pointers. Our experiments show that the proposed scheme not only improves write performance of the Ext3 file system on average by 16 times with various types of edited multimedia files, but also reduces consumed disk space dramatically through the data block sharing.

• Resources Recycling
• /
• v.1 no.1
• /
• pp.23-28
• /
• 1992

The process for recovery of acids and valuable metals such as nickel and chromium from the stainless-steel pickling acids has been developed vased on the use of solvent extraction technique. Until now, several processes for the treatment of waste acids were already developed in such countries as Japan, Swden and Canada. Those methods are, however, forcussed on the recovery of acids from them discarding the metals included in them as the hydroxides sludge. In the present work, the recovery of nickel and chromium in addition to nitric acid and hydrofluoric acid has been aimed so as to recycle them to the stainless-steel pickling lines and also to minimize the amount of sludge generated during the treatment of waste acids. The establishment of the process to recover the acids has been carried out based on the solvent extraction with TBP. The iron was eliminated from the waste solutions by precipitating in the form of hydroxide through the adjustment of pH with calcined limestone and the selective extration of chromium and nickel from the resultant solutions has been conducted by using D2EHPA as extractant.

• Korean Journal of Food Science and Technology
• /
• v.23 no.3
• /
• pp.286-290
• /
• 1991

Phytic acid known as an antinutritional facfor was studied for its effect on the solubility and digestibility of high-phytate and low-phytate soy protein isolates (SPI) obtained by two different methods of pH adjustment. Phytic acid content was 2.48% in high-phytate SPI and 0.72% in low-phytate SPI. Solubility of soy proteins was higher in low-phytate SPI than in high-phytate SPI at all pH values tested and it was lowered by adding more phytic acid to result in precipitation of the proteins. The inhibitory effect of phytic acid toward pepsin digestion of SPI increased by the increasing amount of phytic acid added and its effect was slightly higher in high-phytate SPI than in low-phytate SPI.