• 제목/요약/키워드: Adipate

검색결과 129건 처리시간 0.026초

연질 PVC 필름에 포장된 생육류의 지방함량, 두께, 저장온도와 기간에 따른 Di-(2-ethylhexyl) Adipate의 이행량 (Migration of Di-(2-ethylhexyl) Adipate into the Fresh Meat Wrapped with Plasticized PVC Film Depending on Fat Content, Thickness, Storage Temperature and Period)

  • 홍승인;이근택
    • 한국축산식품학회지
    • /
    • 제23권2호
    • /
    • pp.103-108
    • /
    • 2003
  • 돼지고기와 쇠고기를 다양한 조건으로 PVC 랩 필름으로 포장하고 저장하였을 때 시료로 이행된 DEHA 가소제의 양을 조사하였다. 돼지고기 등심과 등지방을 조합하여 지방 함량을 5.9, 13.9와 29.6%로 각각 만들어 랩 포장하고 5$^{\circ}C$에서 2일간 저장한 결과 지방함량이 높을수록 이행량은 증가되는 경향을 보였다. 돼지고기를 -2, 5와 1$0^{\circ}C$에서 각각 저장하였을 때 저장 기간이 연장되고 저장 온도가 상승할수록 이행량이 증가하는 경향을 보였다. 그리고 랩 포장된 돼지고기와 쇠고기 시료육에서 필름과 접촉된 표면으로부터 멀어질수록 이행량은 낮게 나타났으며 2 cm 이상의 깊이에서는 DEHA가 검출되지 않았다. 돼지고기 삼겹살을 랩 포장 후 5$^{\circ}C$에서 3일간 저장하였을 때 한 겹보다는 두 겹으로 포장 시 이행량이 높게 나타났다. 한편 2일 후 분쇄한 다음 새로 랩 포장하여 하루 더 저장하였던 시료에서는 앞의 두 시료들에서보다 이행량이 더 낮게 나타났다. 국내에는 DEHA 이행량에 대한 기준이 없지만 유럽연합의 기준치인 3 mg/d$m^2$ 또는 18 mg/kg에 근거하면 조사된 대부분의 시료들에서 이 기준치를 초과한 것으로 나타났다.

아디프산과 폴리에틸렌글리콜로부터 폴리(옥시에텔렌-아디페이트)-디올 공중합체 합성: 촉매농도의 영향 (Synthesis of Poly(oxyethylene-co-adipate)-diol from Adipic Acid and Polyethylene Glycols: Effect of Catalyst Concentration)

  • 정용송;이상호
    • Elastomers and Composites
    • /
    • 제49권2호
    • /
    • pp.110-116
    • /
    • 2014
  • 디에틸렌글리콜(DEG, 분자량 106.1)과 폴리에틸렌글리콜600(PEG600, 분자량 603.3)을 아디프산(AA)과 반응시켜 폴리(옥시에텔렌-아디페이트)-디올 공중합체를 합성하는 에스테르 반응에서, stannous 2-ethylhexanoate 촉매의 농도가 반응속도에 주는 영향을 연구하였다. 반응에 사용되는 AA의 카르복실기 당량 대비 폴리올의 히드록실기의 당량비를 2로 맞추어서 합성된 폴리(에테르-에스테르)의 양말단이 OH기로 결합되도록 유도하였다. 반응은 $170^{\circ}C$에서 촉매농도 0.15 ~ 2.0 wt.%로 수행하였다. 합성된 폴리(옥시에텔렌-아디페이트)-디올의 수평균 중합도는 약 3 이었다. DEG와 AA로부터 폴리(옥시에텔렌-아디페이트)-디올이 합성되는 반응의 겉보기속도상수($k_{app}$) 값은 촉매의 농도가 커짐에 따라 $k_{app}=0.88[C_{cat}]$의 관계를 가지며 선형적으로 증가한 반면에, PEG600과 AA의 에스테르 반응의 $k_{app}$ 값은 촉매농도와 $k_{app}=0.123[C_{cat}]^{0.55}$의 관계로 증가하며 포화되는 경향을 나타내었다. DEG와 AA사이의 합성반응에서도 반응속도의 촉매농도에 대한 의존성이 비선형 관계로 바뀌는 것이 예상되며, 이때의 촉매농도는 [$Sn(C_8H_{15}O_2)_2$ mole/mole of AA mole] 값이 0.066([$C_{cat}$]=0.22M)에 가까운 영역에 있을 것으로 추정된다.

실록산 폴리올의 도입에 따른 수분산성 폴리우레탄의 제조 (Preparation of Waterborne Polyurethane Dispersion Based on Siloxane Polyal)

  • 유수용;김정두;김상규;문명준;이민규
    • 한국환경과학회지
    • /
    • 제16권8호
    • /
    • pp.891-896
    • /
    • 2007
  • Waterborne polyurethane dispersions (WPUD) were prepared by poly(ethylene glycol) adipate as the polyester type, ${\alpha},{\omega}-hydroxyalkyl$ terminated polydimethylsiloxane (PDMS-diol) as the polysiloxane type, hexamethylene diisocyanate, and isophorone diisocyanate, dimethylol propionic acid. The effects of PDMS-diol contents on the particle size, thermal and surface properties of WPUD were investigated. The structures of the synthesized WPUD were confirmed using by FT-IR. The surface, thermal and mechanical properties were investigated by measuring the contact angles, DSC, TGA and UTM. As PDMS-diol contents increased, the particle size, the contact angle, and the elongation was increased, while the tensile strength was decreased. Also the thermal stabilities of the synthesised WPUD were increased as PDMS-diol contents increased.

가소제를 포함한 셀룰로오즈 유도체의 유변학적 거동 (Rheological properties of cellulose derivative including plasticizer)

  • 최형진;유재림;김성태;현형수
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2005년도 제25회 추계학술대회논문집
    • /
    • pp.9-12
    • /
    • 2005
  • 본 연구에서는 셀룰로오즈 유도체로 사용되어지는 cellulose acetate butyate (CAB), cellulose acetate propionate (CAP), nitrocellilose (GC-519)의 분자량에 의한 유변학적 특성의 영향을 분석하기 위하여 각각의 셀룰로오즈 유도체를 Gel Permeartion Chromatography (GPC)를 이용하여 각각의 분자량을 측정하였다. GPC를 이용하여 셀룰로오즈 유도체의 중량평균분자량 (Mw)과 수평균분자량 (Mn)을 측정하였다. 각각의 셀룰로오즈 유도체에 가소제인 di-n-propyl adipate (DNPA)를 첨가한 뒤 아세톤에 녹여 레오미터를 이용하여 $0^{\circ}C$에서 가소제가 포함된 셀룰로오즈 유도체의 유변학적 특성을 측정하였다.

  • PDF

생분해성 PBAT와 MWCNT 복합재료의 제조 및 열적, 기계적 특성 (Thermal and Mechanical Properties of Biodegradable PBAT and MWCNT Composites)

  • 조용광;배성국;노건호;박찬영;이원기;장성호
    • 한국환경과학회지
    • /
    • 제26권1호
    • /
    • pp.79-85
    • /
    • 2017
  • Multi-Walled Carbon Nanotubes (MWCNTs) were modified with epoxy and aminosilane diethanolamine (DEA), and nanocomposites of poly(butylene adipate-co-terephthalate) (PBAT) and the modified MWCNTs were prepared with the aim of improving the physical properties of biodegradable PBAT. The physical and the thermal properties of the PBAT/MWCNT nanocomposites were investigated using various techniques. Fourier transform infrared spectroscopy measurements revealed that the MWCNTs were efficiently modified with DEA. Scanning electron micrographs of the nanocomposites indicated that the modified MWCNTs were dispersed homogeneously in PBAT. The thermal stability of the nanocomposite decreased with increase in the content of epoxy-MWCNT-DEA due to the poor thermal stabilities of epoxy and amino silane DEA. However, the surface hydrophobicity of the nanocomposite increased. The highest stress (170% of PBAT) was observed when the content of epoxy-MWCNT-DEA in the nanocomposite was 2 wt%.

생분해성 PBAST와 변형 열가소성 전분 블렌드의 특성 (Characteristics of Biodegradable Blends of PBAST and Chemically Modified Thermoplastic Starch)

  • 신부영
    • 폴리머
    • /
    • 제35권6호
    • /
    • pp.580-585
    • /
    • 2011
  • 본 연구는 석유유래 생분해성 고분자인 poly(butylene adipate-co-succinate-co-terephthalate)(PBAST)의 생분해도와 친환경성을 높이기 위하여 변형 열가소성 전분(CMPS, chemically modified thermoplastic starch)을 첨가하였다. CMPS는 천연고분자인 전분을 가소제, maleic anhydride(MA) 및 반응개시제로 반응시켜 제조한 일종의 식물유래 생분해성 수지이다. PBAST/CMPS 블렌드의 파단면 사진으로부터 PBAST와 CMPS 상이 분리된 비혼화성 (immiscible blend) 블렌드이지만 상 사이의 계면 형상이 좋은 상용성 블렌드임을 알 수 있었다. 인장강도와 연신율은 CMPS 함량이 증가함에 따라 감소하였지만 탄성률은 증가하였다. 블렌드의 생분해도는 순수 PBAST에 비해 매우 높았고 CMPS의 함량이 증가함에 따라 증가하였다.

Lipophilic Crown-4 Derivatives as Lithium Ionophores for Lithium Ion Selective Liquid Membrane Electrodes

  • Jae Sang Kim;Sung Ouk Jung;Shim Sung Lee;Si-Joong Kim
    • Bulletin of the Korean Chemical Society
    • /
    • 제14권1호
    • /
    • pp.123-127
    • /
    • 1993
  • New lipophilic Crown-4 compounds of 16-membered rings containing furan (neutral carrier,I), tetrahydrofuran (neutral carrier,II) and lithium complex of the latter (neutral carrier,III) have been synthesized and tested as the active sensors for lithium ion in poly(vinyl chloride) (PVC) membrane electrode, in the presence and absence of an anion excluder, tetrakis(4-chloro-phenyl)borate (KTClPB), 2-nitrophenyl phenyl ether (NPPE), tris(2-ethylhexyl)phosphate (TEHP), o-nitrophenyl octyl ether (NPOE), dioctyl adipate (DOA), bis(2-ethylhexyl)adipate (BEHA), di-n-octylphenyl phosphonate (DOPP) were used as plasticizing solvent mediators. The electrode response function had a nearly Nernstian slope of 54-61 mV per decade (25$^{\circ}$C) within the concentration range of $10^{-1}-10^{-4}$ M LiCl and the detection limits for all electrodes were ca. $5{\times}10^{-4}$ M. The response time of the electrode was faster at the higher lithium concentration and the response of the electrode was stable for longer than 6 months. The sensor membranes exhibit improved response times and increased lifetimes as compared to the system described earlier.

Preparation and Characterization of PBAT/OTPS Blend Films with Epoxidized Soybean Oil (ESO) for Eco-friendly Packaging Application

  • Jina Song;Sangwoo Kwon;Su-il Park
    • 한국포장학회지
    • /
    • 제29권1호
    • /
    • pp.9-14
    • /
    • 2023
  • The application of starch-based films is limited by the poor water vapor barrier and mechanical properties. In this study, plasticized octenyl-succinated corn starch (OTPS) was mixed into Poly (butylene adipate-co-terephthalate) (PBAT) with various concentration (0/0.25/0.5/0.75 wt%) of epoxidized soybean oil (ESO) to enhance the mechanical properties and the hydrophobicity of blends. Tensile Strength and elongation at break of PBAT/OTPS film was slightly strengthened as the added ratio of ESO raised to 0.5 wt%, yet lessened again in 0.75 wt% sample. The yield strength and elastic modulus were highest in 0.25wt% of ESO added. In thermal properties, the melting temperature (Tm) and crystallization temperature (Tc) were highest at ESO 0.25 and the maximum degradation temperature (Tmax) of components of the films were developed as ESO added. Also, it has been proved that the addition of hydrophobic substances reduces the hydrophilicity of the film by contact angle. This suggests the use of epoxidized oil for preparing films based on high TPS content allows obtaining enhanced interfacial adhesion. This study confirmed that ESO acts as a compatibilizer between OTPS and PBAT to improve the mechanical properties and hydrophobicity of the sample. The sample containing 0.5wt% of ESO was the most suitable for packaging application.

Effects of Perinatal Exposure to Phthalate/Adipate Esters on Sex Steroid Levels and Hypothalamic Gene Expression during Early Postnatal Periods in Rats

  • Lee, Hwi-Cheul;Im, Gi-Sun;Chung, Hak-Jae;Lee, Poong-Yeon;Park, Jin-Ki;Chang, Won-Kyong;Yang, Boh-Suk;Yamanouchi, Keitaro;Nishihara, Masugi
    • Reproductive and Developmental Biology
    • /
    • 제30권4호
    • /
    • pp.247-253
    • /
    • 2006
  • Our previous research has identified granulin (grn) and p130 genes as sex steroid-inducible genes in the rat hypothalamus, which might be involved in sexual differentiation of the brain. Phthalate esters that are used as plasticizers and also found at low levels in foods such as dairy products are often mentioned as suspected endocrine disrupters. The purpose of the present study is to elucidate whether perinatal exposure to di-n-butyl phthalate (DBP), diisononyl phthalate (DINP) and di-2-ethylhexyl adipate (DEHA) affects hypothalamic sex steroid-inducible genes. The present study assessed the effects of perinatal exposure to DBP, DINP and DEHA on sex steroid hormones levels and hypothalamic gm and p130 mRNA expressions at postnatal day (PND) 3 and 7. Pregnant rats were fed a soy-free diet containing 20, 200, 2,000 and 10,000 ppm of DBP, 40, 400, 4,000 and 20,000 ppm of DINP, or 480, 2,400 and 12,000 ppm of DEHA from gestational day (GD) 15 to GD 3 or 7. At PND 3 and 7, perinatal exposure to these chemicals did not substantially affect serum concentrations of testosterone and estradiol. At PND 3, the expression of grn mRNA levels in males was decreased by DEHA, and that of p130 was decreased by DBP, DINP and DEHA, though the effects were not dose-dependent. At PND 7, the expression of gm gene in female pups was increased by higher doses of DBP and all the doses, except for 4,000 ppm, of DINP, while that in male pups decreased by 480 and 12,000 ppm of DEHA. Hypothalamic expression of p130 mRNA in males was increased by lower doses of DBP and all the doses of DINP, whereas that of females was decreased by 480 and 2,400 ppm of DEHA. These results suggest that these chemicals may affect the expression of gm and p130 genes by directly acting on the hypothalamus, thus leading to inappropriate expression of these genes.

성숙한 랫트의 번식 기능에 있어 프탈레이트/아디페이트 에스테르의 주산기 노출의 영향 (Effects of Phthalate/Adipate Esters Exposure during Perinatal Period on Reproductive Function after Maturation in Rats)

  • 이휘철;고응규;임기순;정학재;성환후;장원경
    • Journal of Animal Science and Technology
    • /
    • 제48권5호
    • /
    • pp.651-662
    • /
    • 2006
  • 프탈레이트 에스테르는 플라스틱 가소제로서 이용되며 또한 유제품과 같은 음식에서 미량으로 발견되고, 종종 내분비 교란물질로 의심되고 있다. 본 연구의 목적은 DBP, DINP 또는 DEHA의 주산기 노출이 랫트에 있어 성 성숙 후, 번식기능 특히 뇌의 성분화에 어떤 영향을 끼치는 지에 대해 조사하였다. 이를 수행하기 위해서, 어미에게 식물성 에스트로겐의 함유가 낮은 분말 사료에 다음과 같은 단계적 농도의 DBP (20, 200, 2000, 10000 ppm), DINP (40, 400, 4000, 20000 ppm), DEHA (480, 2400, 12000 ppm)를 혼합한 후, 임신 15일째부터 출생 후, 21일째 (이유기)까지 섭취 시켰고, 성 성숙 후, 혈청 성호르몬 및 성선자극호르몬의 레벨과 교배행동 및 성주기 회귀를 분석하였다. 그 결과, DBP, DINP 또는 DEHA의 주산기 노출에 의한 생후 20~21주째의 암수 랫트에 있어, 성호르몬 및 성선자극호르몬의 레벨뿐만 아니라 암컷의 성주기의 회귀에 대해 어떠한 영향을 주지 않았다. 이것은 시상하부-하수체-성선축의 내분비계를 제어하는 뇌의 성분화에는 이들 화학물질이 영향을 주지 않았다는 사실을 시사한다. 하지만, 수컷의 성행동 특히, 사정 (ejaculation)과 암컷의 로도시스 반응이 억제되는 것이 관찰되었다. 이러한 결과로부터 DBP, DINP 또는 DEHA의 주산기 노출은 성선자극 호르몬의 분비에는 영향을 주지 않지만, 성행동을 제어하는 시상하부의 어떤 영역에 직접적으로 작용할 가능성 즉, 뇌의 성분화에 영향을 끼쳐 성 성숙 후, 성 특이적 행동을 억제시킬 가능성을 시사한다.