• Title/Summary/Keyword: Adipate

Search Result 129, Processing Time 0.02 seconds

Migration of Di-(2-ethylhexyl) Adipate into the Fresh Meat Wrapped with Plasticized PVC Film Depending on Fat Content, Thickness, Storage Temperature and Period (연질 PVC 필름에 포장된 생육류의 지방함량, 두께, 저장온도와 기간에 따른 Di-(2-ethylhexyl) Adipate의 이행량)

  • 홍승인;이근택
    • Food Science of Animal Resources
    • /
    • v.23 no.2
    • /
    • pp.103-108
    • /
    • 2003
  • The effect of fat content, thickness, and storage temperature and period of fresh meat samples on the migration of di-(2-ethylhexyl) adipate(DEHA) from plasticized PVC film was investigated. Pork samples were prepared to have different fat contents by mixing with pork loin and pork backfat and stored at 5$^{\circ}C$ for 2 d. The migration values of DEHA into the pork samples were increased with a high fat content. There was a gradual increase in the DEHA concentration as a function of prolonged exposure period and elevated storage temperature when the pork samples were stored at -2, 5 and l0$^{\circ}C$ for up to 7 d, respectively. The migration of DEHA into fresh pork and beef was limited only to a small depth under the meat surface($\leq$2 cm). The migration value was higher when the pork belly was wrapped double with plasticized PVC film compared to once after storage at 5$^{\circ}C$ for 3 d. However, when the samples was minced and repacked with new film after 2 d, and kept for a further 1 d, these showed lower migration value compared to the above two intact samples. Migration values exceeded in most cases the upper limit for DEHA migration proposed by the EU(18 mg/kg or 3 mg/d㎡), even though no limitation is currently set in Korea.

Synthesis of Poly(oxyethylene-co-adipate)-diol from Adipic Acid and Polyethylene Glycols: Effect of Catalyst Concentration (아디프산과 폴리에틸렌글리콜로부터 폴리(옥시에텔렌-아디페이트)-디올 공중합체 합성: 촉매농도의 영향)

  • Jung, Yong-Sung;Lee, Sang-Ho
    • Elastomers and Composites
    • /
    • v.49 no.2
    • /
    • pp.110-116
    • /
    • 2014
  • We investigated the effect of the concentration of stannous 2-ethylhexanoate catalyst on the esterification rate between adipic acid (AA) and each of two PEG oligomers, diethylene glycol (DEG) and polyethylene glycol (PEG600). The concentration of the catalyst was varied from 0.15 to 2.0 wt.%. To attach hydroxy group to each end of the poly(oxyethylene-co-adipate) synthesized from AA and the PEGs, the esterification was performed with excessive PEG oligomers ([PEG]/[AA]=2) at $170^{\circ}C$. The degree of polymerization of the poly(oxyethylene-co-adipate)diol products were three. The apparent rate constant ($k_{app}$) of the esterification between AA and DEG shows the first order dependency on the catalyst concentration ($k_{app}=0.88[C_{cat}]$), whereas the $k_{app}$ of the esterification between AA and PEG600 has a relation of $k_{app}=0.123[C_{cat}]^{0.55}$ with the catalyst concentration. It is expected that the rate of esterification between AA and DEG has a non-linear dependency on the catalyst concentration as the catalyst concentration approaches to 0.22M.

Preparation of Waterborne Polyurethane Dispersion Based on Siloxane Polyal (실록산 폴리올의 도입에 따른 수분산성 폴리우레탄의 제조)

  • Yoo, Su-Yong;Kim, Jung-Du;Kam, Sang-Kyu;Moon, Myung-Jun;Lee, Min-Gyu
    • Journal of Environmental Science International
    • /
    • v.16 no.8
    • /
    • pp.891-896
    • /
    • 2007
  • Waterborne polyurethane dispersions (WPUD) were prepared by poly(ethylene glycol) adipate as the polyester type, ${\alpha},{\omega}-hydroxyalkyl$ terminated polydimethylsiloxane (PDMS-diol) as the polysiloxane type, hexamethylene diisocyanate, and isophorone diisocyanate, dimethylol propionic acid. The effects of PDMS-diol contents on the particle size, thermal and surface properties of WPUD were investigated. The structures of the synthesized WPUD were confirmed using by FT-IR. The surface, thermal and mechanical properties were investigated by measuring the contact angles, DSC, TGA and UTM. As PDMS-diol contents increased, the particle size, the contact angle, and the elongation was increased, while the tensile strength was decreased. Also the thermal stabilities of the synthesised WPUD were increased as PDMS-diol contents increased.

Rheological properties of cellulose derivative including plasticizer (가소제를 포함한 셀룰로오즈 유도체의 유변학적 거동)

  • Choi Hyoung-Jin;You Jae-Lim;Kim Sung-Thae;Hyun Hyoung-Soo
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2005.11a
    • /
    • pp.9-12
    • /
    • 2005
  • Molecular characteristics and rheological properties of cellulose acetate butyrate (CAB), cellulose acetate propionate (CAP) and nitrocellulose (GC-519) which are being widely used as propellants were investigated. Their weight-average molecular weight (Mw) and number-average molecular weight (Mn) were estimated via Gel Permeartion Chromatograpy (GPC). Cellulose derivatices were mixed with di-n-propyl adipate (DNPA) which acted as plasticizer in acetone, and then rheological properties of the mixture of cellulose derivatives and this plasticizer in acetone were investigated at $0^{\circ}C$ by rheometer.

  • PDF

Thermal and Mechanical Properties of Biodegradable PBAT and MWCNT Composites (생분해성 PBAT와 MWCNT 복합재료의 제조 및 열적, 기계적 특성)

  • Cho, Yong-Kwang;Bae, Seong-Guk;Noh, Geon Ho;Park, Chan-Young;Lee, Won-Ki;Jang, Seong-Ho
    • Journal of Environmental Science International
    • /
    • v.26 no.1
    • /
    • pp.79-85
    • /
    • 2017
  • Multi-Walled Carbon Nanotubes (MWCNTs) were modified with epoxy and aminosilane diethanolamine (DEA), and nanocomposites of poly(butylene adipate-co-terephthalate) (PBAT) and the modified MWCNTs were prepared with the aim of improving the physical properties of biodegradable PBAT. The physical and the thermal properties of the PBAT/MWCNT nanocomposites were investigated using various techniques. Fourier transform infrared spectroscopy measurements revealed that the MWCNTs were efficiently modified with DEA. Scanning electron micrographs of the nanocomposites indicated that the modified MWCNTs were dispersed homogeneously in PBAT. The thermal stability of the nanocomposite decreased with increase in the content of epoxy-MWCNT-DEA due to the poor thermal stabilities of epoxy and amino silane DEA. However, the surface hydrophobicity of the nanocomposite increased. The highest stress (170% of PBAT) was observed when the content of epoxy-MWCNT-DEA in the nanocomposite was 2 wt%.

Characteristics of Biodegradable Blends of PBAST and Chemically Modified Thermoplastic Starch (생분해성 PBAST와 변형 열가소성 전분 블렌드의 특성)

  • Shin, Boo-Young
    • Polymer(Korea)
    • /
    • v.35 no.6
    • /
    • pp.580-585
    • /
    • 2011
  • This article aims to enhance the biodegradability and environment-friendliness of petroleum based biodegradable poly(butylene adipate-co-succinate-co-terephthalate)(PBAST) by blending chemically modified thermoplastic starch(CMPS). CMPS is a kind of bio-based biodegradable resin which is manufactured by reacting starch with maleic anhydride(MA) in the presence of a plasticizer and a free radical initiator. The characteristic properties of PBAST/CMPS blends were investigated by observing their morphology, thermal, mechanical properties, and biodegradability. The good interfacial adhesion between the phases examined by SEM revealed that PBAST/CMPS blends were compatible blends. The tensile strength and elongation decreased with increasing CMPS content, while modulus increased. The biodegradability of the blends was much higher than that of pristine PBAST and increased with increasing CMPS contents.

Lipophilic Crown-4 Derivatives as Lithium Ionophores for Lithium Ion Selective Liquid Membrane Electrodes

  • Jae Sang Kim;Sung Ouk Jung;Shim Sung Lee;Si-Joong Kim
    • Bulletin of the Korean Chemical Society
    • /
    • v.14 no.1
    • /
    • pp.123-127
    • /
    • 1993
  • New lipophilic Crown-4 compounds of 16-membered rings containing furan (neutral carrier,I), tetrahydrofuran (neutral carrier,II) and lithium complex of the latter (neutral carrier,III) have been synthesized and tested as the active sensors for lithium ion in poly(vinyl chloride) (PVC) membrane electrode, in the presence and absence of an anion excluder, tetrakis(4-chloro-phenyl)borate (KTClPB), 2-nitrophenyl phenyl ether (NPPE), tris(2-ethylhexyl)phosphate (TEHP), o-nitrophenyl octyl ether (NPOE), dioctyl adipate (DOA), bis(2-ethylhexyl)adipate (BEHA), di-n-octylphenyl phosphonate (DOPP) were used as plasticizing solvent mediators. The electrode response function had a nearly Nernstian slope of 54-61 mV per decade (25$^{\circ}$C) within the concentration range of $10^{-1}-10^{-4}$ M LiCl and the detection limits for all electrodes were ca. $5{\times}10^{-4}$ M. The response time of the electrode was faster at the higher lithium concentration and the response of the electrode was stable for longer than 6 months. The sensor membranes exhibit improved response times and increased lifetimes as compared to the system described earlier.

Preparation and Characterization of PBAT/OTPS Blend Films with Epoxidized Soybean Oil (ESO) for Eco-friendly Packaging Application

  • Jina Song;Sangwoo Kwon;Su-il Park
    • KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
    • /
    • v.29 no.1
    • /
    • pp.9-14
    • /
    • 2023
  • The application of starch-based films is limited by the poor water vapor barrier and mechanical properties. In this study, plasticized octenyl-succinated corn starch (OTPS) was mixed into Poly (butylene adipate-co-terephthalate) (PBAT) with various concentration (0/0.25/0.5/0.75 wt%) of epoxidized soybean oil (ESO) to enhance the mechanical properties and the hydrophobicity of blends. Tensile Strength and elongation at break of PBAT/OTPS film was slightly strengthened as the added ratio of ESO raised to 0.5 wt%, yet lessened again in 0.75 wt% sample. The yield strength and elastic modulus were highest in 0.25wt% of ESO added. In thermal properties, the melting temperature (Tm) and crystallization temperature (Tc) were highest at ESO 0.25 and the maximum degradation temperature (Tmax) of components of the films were developed as ESO added. Also, it has been proved that the addition of hydrophobic substances reduces the hydrophilicity of the film by contact angle. This suggests the use of epoxidized oil for preparing films based on high TPS content allows obtaining enhanced interfacial adhesion. This study confirmed that ESO acts as a compatibilizer between OTPS and PBAT to improve the mechanical properties and hydrophobicity of the sample. The sample containing 0.5wt% of ESO was the most suitable for packaging application.

Effects of Perinatal Exposure to Phthalate/Adipate Esters on Sex Steroid Levels and Hypothalamic Gene Expression during Early Postnatal Periods in Rats

  • Lee, Hwi-Cheul;Im, Gi-Sun;Chung, Hak-Jae;Lee, Poong-Yeon;Park, Jin-Ki;Chang, Won-Kyong;Yang, Boh-Suk;Yamanouchi, Keitaro;Nishihara, Masugi
    • Reproductive and Developmental Biology
    • /
    • v.30 no.4
    • /
    • pp.247-253
    • /
    • 2006
  • Our previous research has identified granulin (grn) and p130 genes as sex steroid-inducible genes in the rat hypothalamus, which might be involved in sexual differentiation of the brain. Phthalate esters that are used as plasticizers and also found at low levels in foods such as dairy products are often mentioned as suspected endocrine disrupters. The purpose of the present study is to elucidate whether perinatal exposure to di-n-butyl phthalate (DBP), diisononyl phthalate (DINP) and di-2-ethylhexyl adipate (DEHA) affects hypothalamic sex steroid-inducible genes. The present study assessed the effects of perinatal exposure to DBP, DINP and DEHA on sex steroid hormones levels and hypothalamic gm and p130 mRNA expressions at postnatal day (PND) 3 and 7. Pregnant rats were fed a soy-free diet containing 20, 200, 2,000 and 10,000 ppm of DBP, 40, 400, 4,000 and 20,000 ppm of DINP, or 480, 2,400 and 12,000 ppm of DEHA from gestational day (GD) 15 to GD 3 or 7. At PND 3 and 7, perinatal exposure to these chemicals did not substantially affect serum concentrations of testosterone and estradiol. At PND 3, the expression of grn mRNA levels in males was decreased by DEHA, and that of p130 was decreased by DBP, DINP and DEHA, though the effects were not dose-dependent. At PND 7, the expression of gm gene in female pups was increased by higher doses of DBP and all the doses, except for 4,000 ppm, of DINP, while that in male pups decreased by 480 and 12,000 ppm of DEHA. Hypothalamic expression of p130 mRNA in males was increased by lower doses of DBP and all the doses of DINP, whereas that of females was decreased by 480 and 2,400 ppm of DEHA. These results suggest that these chemicals may affect the expression of gm and p130 genes by directly acting on the hypothalamus, thus leading to inappropriate expression of these genes.

Effects of Phthalate/Adipate Esters Exposure during Perinatal Period on Reproductive Function after Maturation in Rats (성숙한 랫트의 번식 기능에 있어 프탈레이트/아디페이트 에스테르의 주산기 노출의 영향)

  • ;;;;;;Yamanouchi, K.;Nishihara, M.
    • Journal of Animal Science and Technology
    • /
    • v.48 no.5
    • /
    • pp.651-662
    • /
    • 2006
  • Phthalate esters that are used as plasticizers and also found at low levels in foods such as dairy products are often mentioned as suspected endocrine disrupters. The purpose of the present study is to elucidate whether perinatal exposure to di-n-butyl phthalate(DBP), diisononyl phthalate (DINP) and di-2-ethylhexyl adipate (DEHA) affects several aspects of reproductive function in rats especially sexual differentiation of the brain. To this end, the dams were provided with pulverized soy-free diet containing 20, 200, 2,000 and 10,000 ppm of DBP, 40, 400, 4,000 and 20,000 ppm of DINP, or 480, 2,400 and 12,000 ppm of DEHA from gestational day (GD) 15 to postnatal day (PDN) 21, the day of weaning, and serum sex steroid hormone, gonadotropin levels and sexual behaviors after maturation were assessed. At Postnatal week (PNW) 20-21, serum levels of sex steroids and gonadotropins in both male and female rats, as well as estrous cyclicity in females, were not changed by perinatal exposure to DBP, DINP and DEHA, indicating that these chemicals did not affect sexual differentiation of the brain controlling the endocrine system of hypothalamo-pituitary-gonadal (HPG) axis. On the other hand, inhibitory influences on sexual behaviors, especially on ejaculation in males and lordosis in females, were observed by perinatal exposure to these chemicals. These results suggest that these chemicals may act directly on discrete regions of the hypothalamus regulating sexual behaviors, but not regulating gonadotropin secretion, thereby affect sexual differentiation of the brain with a resultant decrease in sex-specific behaviors in adulthood.