• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.2
• /
• pp.154-159
• /
• 2013

In this paper, the effect of bolt clamping force and form accuray of contact surface between mirror and mount on mirror surface was studied. Normally, mirror used in reflecting optical system was assembled with mount by bolts or adhesive. In this case, the tension caused by bolt clamping force or adhesive force may distort the mirror surface. Also, form accuracy error of the contact surface have a negative impact on wrenched mirror surface which assembled by bolts or adhesive. In this study, stress and distorted displacements on mirror surface were analyzed according to the different contact surface form accuracies and bolt clamping forces by using the finite element analysis method.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.4
• /
• pp.223-228
• /
• 2008

The purpose of this study was to investigate the feasibility of developing transdermal drug delivery system (TDDS) for fentanyl used for the management of chronic cancer pain. The effect of type of pressure sensitive adhesive on the permeation of fentanyl from polyisobutylene (PIB), silicone and acrylic adhesive was evaluated. Due to the good adhesive force and relatively steady flux for 3 days, both acrylic and PIB adhesives were chosen for further study. The permeation rate of fentanyl was the highest from acrylic adhesive with hydroxyl functional group. Permeation rate increased linearly as the concentration of fentanyl in acrylic adhesive was increased from 2.5% to 10%. In case of PIB adhesive, crystals of fentanyl were developed above 5% drug load. $Crovol^{(R)}$ A40, $Crovol^{(R)}$ PK40 and Plurol $oleique^{(R)}$ provided higher flux of fentanyl.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.877-878
• /
• 2006

In electric motor coaches, the rolling stocks move by the adhesive effort between rail and driving wheel. Generally, the adhesive effort is defined by the function of both the weight of electric motor coach and the adhesive effort between rails and driving wheel. The characteristics of adhesive effort is strongly affected by the conditions between rails and driving wheel. When the adhesive effort decreases suddenly, inertia conversion the electric motor coach has slip phenomena. This paper proposes a anti-slip control algorithm which uses the maximum adhesive effort by instantaneous estimation of adhesion force using load torque disturbance observer. Based on this estimated adhesive effort, the anti-slip control is performed to obtain the maximum transfer of the tractive effort.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.11
• /
• pp.115-120
• /
• 2021

In this study, cigarettes, which are an essential element in the production of tobacco, are generally not cylindrical. The main materials used for cigarettes are generally hemp and pulp. For the production of cylindrical cigarettes, the cigarettes or cylinders are mounted via gluing. This adhesive is a vinyl acetate emulsion, a high-temperature melt adhesive, and is adhered in a cylindrical shape immediately after being linearly applied to the inner surface of the paper roll or a local part. These adhesives are greatly affected by the atmospheric temperature of the manufacturing space in summer and winter. In the summer, even if the adhesive is temporarily adhered, the coagulation time of the adhesive is long, and problems such as deterioration of the adhesive state occur. in the winter, there is a problem that the temperature of the manufacturing space is low and the adhesive force of the adhesive is poor, resulting in defective adhesive products. In order to solve these problems, another heat transfer device is utilized to cure the remaining adhesive to ensure higher adhesiveness.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.449-449
• /
• 2011

We reported the direct effect of intrinsic surface energy of dry adhesive material to the Van der Waals and capillary forces contributions of the total adhesion force in an artificial gecko-inspired adhesion system. To mimic the gecko foot we fabricated tilted nanohairy structures using both lithography and ion beam treatment. The nanohairy structures were replicated from Si wafer mold using UV curable polymeric materials. The control of nanohairs slanting angles was based on the uniform linear argon ion irradiation to the nanohairy polymeric surface. The surface energy was studied utilizing subsequent conventional oxygen ion treatment on the nanohairy structures which resulted in gradient surface energy. Our shear adhesion test results were found in good agreement with the accepted Van der Waals and capillary forces theory in the gecko adhesion system. Surface energy would give a direct impact to the effective Hamaker constant in Van der Waals force and the filling angle (${\varphi}$) of water meniscus in capillary force contributions of gecko inspired adhesion system. With the increasing surface energy, the effective Hamaker constant also increased but the filling angle decreased, resulting in a competition between the two forces. Using a simple mathematical model, we compared our experimental results to show the quantitative contributions of Van der Waals and capillary forces in a single adhesion system on both hydrophobic and hydrophilic surfaces. We found that the Van der Waals force contributes about 82.75% and 89.97% to the total adhesion force on hydrophilic and hydrophobic test surfaces, respectively, while the remaining contribution was occupied by capillary force. We also showed that it is possible to design ultrahigh dry adhesive with adhesion strength of more than 10 times higher than apparent gecko adhesion force by controlling the surface energy and the slanting angle induced-contact line of dry adhesive the materials.

• Tribology and Lubricants
• /
• v.21 no.5
• /
• pp.236-240
• /
• 2005

In order to prepare for the suitable surfaces of implants or medical devices, quantitative evaluation of adhesion between cells and biomaterials is essential. To better understand adhesion formation between cells and biomaterials, we used the cytodetachment technique which measures the adhesive force of a single cell through changing the, culture time and detachment speed. The results showed that the adhesive force could be affected by the culture time of cells on the surface of materials and the detachment speed. Moreover, there was a large discrepancy among the adhesion strength measured by similar techniques conducted on the different cells and substrates. It can be 'concluded that the variation of the force measurement technique can seriously alter the level of the force required to detach a cell on the surface of materials.

• Journal of Adhesion and Interface
• /
• v.3 no.1
• /
• pp.43-51
• /
• 2002

Advanced adhesive technologies and demanding applications of adhesive joints can no longer be developed successfully by the traditional "trial and error" approach. Appropriate technical solutions require reference to a reliable basis of well-established scientific knowledge about the elementary mechanisms of adhesion (i.e. the 'fundamental adhesion') as they are responsible for the capability of the compound w transmit mechanical force between the adhesive and the substrate surface (i.e. the 'practical adhesion'). Adhesion mechanisms also influence the formation of polymer structure in the adhesive and the resulting macromolecular dynamics in the interphase that is formed in the adhesive near to the substrate. These manifold molecular factors rule the macroscopic behaviour of an adhesive bond line in terms of mechanical and other physical properties as well as in terms of durability. This paper reviews the level of refinement that understanding of fundamental adhesion has achieved up to now.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.2
• /
• pp.71-74
• /
• 2012

Uniformity of the wafer temperature is one of the important factors in etching process. Plasma, chucking force, backside helium pressure and the surface temperature of ESC(electrostatic chuck) affect the wafer temperature. ESC consists of several layers of structure. Each layer has own thermal resistance and the Si-adhesive layer has highest thermal resistance among them. In this work, the temperature distribution of ESC was analyzed by 3-D FEM with various defects and the thickness deviation of the Si-adhesive layer. The result with Si-adhesive layer with the low center thickness deviation shows modified temperature distribution of ESC surface.

• Applied Science and Convergence Technology
• /
• v.26 no.1
• /
• pp.6-10
• /
• 2017

We investigated the stability of ionic configurations of the tip of the cantilever in non-contact AFM.; For this, we used a computational model that couples the ionic motion of the MgO surface and the oscillating cantilever. The motion of ions was connected to the oscillating cantilever using a coupling method that had been recently developed. The adhesive process on the ionic MgO surface leads to energy dissipation of the cantilever. It is shown that limited types of ionic configurations of the tip are stable during the adhesive process. Based on the present computational model, we discuss the adhesive mechanism leading to energy dissipation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.2
• /
• pp.142-148
• /
• 2012

This study presents the assessment results of adhesive properties on the interface between a silicon wafer and nano-scale polymer thin film pattern through UAFM images by using the contact resonance frequency of the cantilever. For the experiment, we varied surface treatment processes for the silicon wafer and fabricated a 300nm polymer thin film pattern through lithography. Images from the optical microscope were used to compare the produced test specimens for adhesive condition and the critical load value from the nano scratch test was used to verify the adhesive condition of the nano pattern. Each test specimen resulted in a $1{\mu}m{\times}1{\mu}m$ surface image and subsurface adhesive image. Adhesive condition was evaluated by image contrast differences on the interface according to the changing amplitudes and phases of contact resonance frequency.