Browse > Article
http://dx.doi.org/10.14775/ksmpe.2021.20.11.115

A Study on Thermal Simulation for Adhesive Curing of Cylindrical Cigarettes  

Park, Yong-Woo (Department of Convergence Mechanical Engineering, Gyeongsang National University)
Moon, Seong-Min (School of Mechanical & Aerospace Engineering, Gyeongsang National University)
Zhang, Qi (R&D Department, Zhejiang Shuanghuan Driveline Co., LTD.)
Lyu, Sung-Ki (School of Mechanical & Aerospace Engineering, Gyeongsang National University)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.20, no.11, 2021 , pp. 115-120 More about this Journal
Abstract
In this study, cigarettes, which are an essential element in the production of tobacco, are generally not cylindrical. The main materials used for cigarettes are generally hemp and pulp. For the production of cylindrical cigarettes, the cigarettes or cylinders are mounted via gluing. This adhesive is a vinyl acetate emulsion, a high-temperature melt adhesive, and is adhered in a cylindrical shape immediately after being linearly applied to the inner surface of the paper roll or a local part. These adhesives are greatly affected by the atmospheric temperature of the manufacturing space in summer and winter. In the summer, even if the adhesive is temporarily adhered, the coagulation time of the adhesive is long, and problems such as deterioration of the adhesive state occur. in the winter, there is a problem that the temperature of the manufacturing space is low and the adhesive force of the adhesive is poor, resulting in defective adhesive products. In order to solve these problems, another heat transfer device is utilized to cure the remaining adhesive to ensure higher adhesiveness.
Keywords
Cigarette; Adhesive; Heat Transfer; Surface Temperature; Internal Temperature;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Lee, E. J., Kim, N. H., Song, G. S., and Lee, J. P., "Heat and Moisture Transfer Characteristics of a Plate-type Enthalpy Exchanger made of Paper", International Journal of Air-Conditioning and Refrigeration, Vol. 19, No. 01, pp. 85-92, 2011.   DOI
2 Kwon, H. K., Yoo, S. Y., "A Study on the Local Heat Transfer Characteristics for Circular Tubes Using Heat Transfer Promoter", Transactions of the Korean Society of Mechanical Engineers B, Vol. 30, No. 5, pp. 389-396, 2006.   DOI
3 Kim, N. H, Sim, Y. S., "Reduction of the Wet Surface Heat Transfer Coefficients from Experimental Data", International Journal of Air-Conditioning and Refrigeration, Vol. 12, No. 1, pp. 37-49, 2004.
4 Lee, E. J., Lee, J. P., Sim, H. M., and Kim, N. H., "Modeling and Verification of Heat and Moisture Transfer in an Enthalpy Exchanger mad of Paper Membrane", International Journal of Air-Conditioning and Refrigeration, Vol. 20, No. 03, pp. 1250015-13, 2012.   DOI
5 Yang, H. D. Yoo, J. Y., and Park, S. H., "A Study on Cooling Characteristics of the LED Lamp Heat Sink for Automobile by Forced Convection", The Korean Society of Manufacturing Process Engineers Vol. 17 No. 6 pp. 117-123. 2018.   DOI
6 Lee, Y. M., Hwang, T. S., Kim, H., Nam, H. T., Lee, K. H., and Kang, M. C., "Modeling Technology on Free-form Surface of a New Military Personal Head using Quick Surface Method", The Korean Society of Manufacturing Process Engineers, Vol. 17 No. 6, pp. 170-176, 2018.   DOI
7 Zhang, L. Z. and Niu, J. L., "Effectiveness correlations for heat and moisture transfer processes in an enthalpy exchanger with membrane cores", J. Heat Transfer, Vol. 124, pp. 922-929, 2002.   DOI
8 Zhang, L. Z., 2008, Heat and mass transfer in plate-fin sinusoidal passages with vapor permeable wall materials, Int. J. Heat Mass Transfer, Vol. 51, pp. 618-629, 2008.   DOI
9 Yoon, C. H., Kwon, S. K., Kim, J., and Choi, H. J., "An experimental study regarding the determination of seasonal heat transfer coefficient in KURT by convection conditions", Safety Science, Vol. 51, No, 1, pp. 241-249, 2013.   DOI
10 Kim, D. W., "Heat Transfer Correlations for Air-Water Two-Phase Flow of Different Flow Patterns In a Horizontal Pipe", Journal of Mechanical Science and Technology, Vol. 15, No. 12, pp. 1711-1727, 2001.