• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.236-239
• /
• 2004

'Structural surface becomes an antenna.' This term, CAS, indicates antenna embedding in structural surfaces. The CAS is composed of several composite laminates and Nomex honeycombs, and microstrip antenna elements are inserted between layers with designed configurations. Constituent materials are selected considering electrical contributions as well as mechanical performances. Antenna design with adhesive films are impossible because cf their thin and rough distributions between honeycomb and substrate. Therefore, adhesive effects on antenna performances in CAS are experimentally investigated, CAS with targeted impedance and radiation characteristics are designed considering adhesive effects.

• 대한소아치과학회지
• /
• 제33권3호
• /
• pp.377-387
• /
• 2006

본 연구는 자가산부식 접착시스템과 자가산부식 프라이머 접착시스템의 다층적용이 혼성층 및 adhesive layer의 형성 양상, 그리고 전단결합강도에 미치는 영향 등을 비교 평가하기 위하여 시행되었다. 영구 구치 140개의 치아를 근원심으로 분할하여 협면 혹은 설면의 상아질을 이용하였다. 각 접착시스템을 1회, 2회, 3회 도포, 그리고 1회 도포 후 광중합한 후 1회의 추가 도포한 군으로 분류하였다. 전단결합강도와 혼성층 및 adhesive layer 두께를 측정하여 분석한 결과 다음과 같은 결론을 얻었다. 1. 모든 접착제에서 도포횟수가 증가함에 따라 adhesive layer의 두께가 증가하였으며 (p<0.05), Adpor Prompt L-Pop과 Xeno III에서는 자가산부식 프라이머 시스템에서보다 작게 나타났다(p<0.05). 2. Adpor Prompt L-Pop에서 혼성층은 도포횟수에 따라 혼성층의 두께도 증가하였다(p<0.05). 3. Unifill Bond와 Clearfill SE Bond의 전단결합강도는 Scotchbond Multi-Purpose Plus와 Adpor Prompt L-Pop에서보다 높게 나타났으며 (p<0.05), Xeno III와는 유사하였다. 4. Adpor Prompt L-Pop은 접착제의 도포횟수가 증가함에 따라 전단결합강도는 유의하게 증가되었으며(p<0.05), AdheSE에서는 3회 도포한 경우 전단결합강도가 감소하는 경향을 보였다(p>0.05). 5. Adpor Prompt L-Pop과 Xeno III에서 첫 층을 중합한 후 두 번째 층을 추가 도포한 경우 전단결합강도는 감소하였다(p<0.05).

• Applied Microscopy
• /
• 제26권3호
• /
• pp.277-291
• /
• 1996

The structures of the egg envelope in fertilized eggs of three species of characidae, head and tail light fish (Hemigrammus ocellifer), black tetra (Gymnocorymbus ternetzi), and buenos aires tetra (Hemigrammus caudovittatus) were studied using light and electron microscopes. The fertilized eggs in all species were colorless, transparent, spherical and non-floted type. The egg envelopes have a single micropyle resembling the pathway of sperm in the area of the animal pole. The micropyle was surrounded by protruded lines of the egg envelope in a radiated form. Egg envelopes of fertilized eggs in both head and tail light fish and buenos aires tetra consisted of three distinct layers; an outer layer, a middle layer and an inner layer. And that of blacktetra consisted of two layers; an outer layer and an inner layer. Also, an outer layers of both head and tail light fish and black tetra were adhesive types but, in that of buenous aires tetra was non-adhesive type. An outer surface of egg envelope in black tetra was arranged by pores regularly. In that of head and tail light fish and buenos aires tetra have a rough side. An inner layer of egg envelope in fertilized eggs consisted of lamellae alternating with interlamellae of lower electron density; an inner layer of fertilized eggs in head and tail light fish consisted of three layers, that of black tetra was four layers, and that of buenos aires tetra was five layers.

• Restorative Dentistry and Endodontics
• /
• 제37권3호
• /
• pp.155-159
• /
• 2012

Objectives: To investigate the effect of dentin moisture degree and air-drying time on dentin-bond strength of two different one-step self-etching adhesive systems. Materials and Methods: Twenty-four human third molars were used for microtensile bond strength testing of G-Bond and Clearfil $S^3$ Bond. The dentin surface was either blot-dried or air-dried before applying these adhesive agents. After application of the adhesive agent, three different air drying times were evaluated: 1, 5, and 10 sec. Composite resin was build up to 4 mm thickness and light cured for 40 sec with 2 separate layers. Then the tooth was sectioned and trimmed to measure the microtensile bond strength using a universal testing machine. The measured bond strengths were analyzed with three-way ANOVA and regression analysis was done (p = 0.05). Results: All three factors, materials, dentin wetness and air drying time, showed significant effect on the microtensile bond strength. Clearfil $S^3$ Bond, dry dentin surface and 10 sec air drying time showed higher bond strength. Conclusions: Within the limitation of this experiment, air drying time after the application of the one-step self-etching adhesive agent was the most significant factor affecting the bond strength, followed by the material difference and dentin moisture before applying the adhesive agent.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2520-2528
• /
• 2000

Mechanical and physical properties of composite materials make a great difference due to their cure process condition. In order to clarify the effect of cure process condition on the microscopic damage behavior and failure mechanism of Carbon/Epoxy composites, three point bend test has been performed. For this purpose, two kinds of specimens with single adhesive and multiple adhesive layers were prepared. For single adhesive layer, four different types of specimen were used, that is, non-sanding, sanding, cocured, laminated specimens. Three different types of specimen were also used for the multiple adhesive layer, non-sanding, sanding, cocured specimens. Acoustic emission technique has also been employed to monitor the damage progresses associated with each micro-failure mechanism. The characteristics of AE parameters associated with micro-failure mechanism of each specimen were discussed.

• Journal of the Korean Wood Science and Technology
• /
• 제52권4호
• /
• pp.301-318
• /
• 2024

Contrary to other materials like metals, glass, etc., wood continuously interacts with the environment, increasing and decreasing its moisture content according to the humidity of the air and changing its dimensions by swelling or shrinking. Water diffusion through laminated solid wood is crucial in wood bonding processes. The adhesive layer might block the diffusion if the water vapor diffusion is perpendicular to the bond line. As a result of this blockage, different proportions of deformation appear on the two sides of the bond line, which causes stresses in the bonded assembly. The question arises of how long the bonded structure will keep its integrity due to moisture diffusion blockage, inevitable tensions appearing in the glue line, and how these stresses could be avoided. With cross laminated timber (CLT) solid wood panel production, this question gains new importance. Despite the relevance, only a limited number of publications are available. Comprehensive research would also be necessary considering both the molecular structure and diffusion properties of the adhesive adjusted to the wood species (covering possible substituting wood species, too). Overall, this review serves as a resource for enhancing our understanding of water vapor diffusion through wood adhesive layers and provides insights that have implications for reducing stresses in bonded wood assemblies and the performance of the bonded group over time. Furthermore, identifying knowledge gaps is necessary to establish the basis for investigating the diffusion property of CLT panels.

• 한국가구학회지
• /
• 제12권2호
• /
• pp.1-10
• /
• 2001

As finger joint method has a high rate of yield and high strength and ease in working, it has been widely used as an end joint method for solid wood and wood based-material. Therefore, we end-joined the material of Pinus densiflora, Quercus variabilis and populus euramericana with polyvinyl acetate adhesive and resorcinol phenol resin adhesive. The effect of difference (0, 0.15, 0.3, 0.45mm) between the dimensions of tip width and root width of the finger (DTRW) on bending strength properties was as follows: 1. In the case of polyvinyl acetate adhesive, DTRW had no effect on bending modulus of elasticity(MOE) and modulus of rupture(MOR) of the three kinds of species, because their bonding layers were destroyed by slippage, not their woody parts. 2. In the case of resorcinol phenol resin adhesive, the material of Quercus variabilis showed an optimal result at 0.15 or 0.3 of DTRW, while the poplar did at 0 of DTRW 3. The differences in efficiency ratio of bending MOR of populus euramericana, Pinus densiflora and Quercus variabilis species according to the kind of adhesive were 13-29%, 23-30% and 45-53%, respectively.

• Applied Microscopy
• /
• 제45권3호
• /
• pp.144-149
• /
• 2015

Nothobranchius guentheri and Nothobranchius patrizii have special life cycle to sustain the dry season. So, we investigated the fertilized eggs morphology, and compared ultrastructures of surface structures and the cross section of fertilized egg envelopes using light and electron microscopes to determine whether these fertilized eggs and egg envelopes show the species specificity or have special structure to sustain the dry season. These fertilized eggs were spherical, yellowish, demersal and adhesive, and had a one-sided large oil droplet. The whip-like structures, adhesive filament were distributed throughout egg envelope in both species. But, that of N. guentheri was covered with fibrous structures, and that of N. patrizii was smooth. The egg envelope consisted of two distinct layers: an outer, electron-dense layer containing adhesive filaments and an inner layer of 16 to 17 horizontal electron-dense lamellae alternating with 15 to 16 interlamellae of lower electron density in both species. The external shapes of fertilized egg and section of fertilized egg envelope were same, but ultrastructure of adhesive filaments on the outer surface was concluded to show species specificity. Our data indicate that the ultrastructural differences of adhesive filament and outer surface of fertilized egg envelope show species specificity although these species belong to same genus.

• Composites Research
• /
• 제20권2호
• /
• pp.27-31
• /
• 2007

미래의 환경에서는 위성을 이용한 통신서비스의 운송체 내에서의 사용이 기하급수적으로 확대될 전망이다. 이를 위해서는 안테나의 성능 향상 및 역학적 에너지의 고효율성에 기하고, 구조적인 안정을 보장하기 위한 복합 안테나 구조의 설계, 제조 및 해석 기술이 필요하다. 복합 안테나 구조가 안테나의 역할 및 구조체로의 역할을 하기 위해서는 접착필름의 사용이 필수적이다. 하지만 접착필름은 얇은 두께로 인하여 설계시 고려되지 못하고 유전체로 작용하여 전자기적 영향을 끼치게 되어 설계자가 기대하는 성능을 얻지 못한다. 따라서, 이러한 접착필름의 전자기적 특성을 실험적으로 알아본다.

• Journal of the Korean Wood Science and Technology
• /
• 제37권4호
• /
• pp.357-363
• /
• 2009

본 연구에서는 작업성과 경제성을 고려하여 집성재 제작용 접착제를 목재와 유리섬유강화플라스틱(GFRP: Glass fiber reinforced plastic) 접착에 적용할 수 있는지를 검토하였다. 복합집성재는 접착제 종류와 혼합비에 따라 6가지 타입으로 제작하여 블록전단강도시험과 침지박리, 삶음박리 시험을 실시하였다. 레조시놀수지 접착제와 초산비닐 수지접착제, 에폭시수지 접착제를 사용한 복합집성재 3가지 타입과 레조시놀수지 접착제와 초산비닐수지 접착제를 혼합한 3가지 타입으로 총 6가지 타입으로 제작하였다. 블록전단시험 결과 모든 타입의 복합집성재가 KS F 3021 기준 $7.1N/mm^2$ 보다 높아 전단강도는 양호하였지만, 목파율에서는 초산비닐수지접착제가 65.9%로 가장 우수한 접착 성능을 나타내었다. 박리시험에서는 초산비닐수지 접착제를 사용한 경우 GFRP 접착층까지 포함된 경우 침지 박리는 1.08%, 삶음박리는 4.16%로 KS F 3021 합격기준인 5% 이하를 만족하였다. 레조시놀수지 접착제만을 사용 한 경우 목재 접착층은 침지박리 1.26%, 삶음박리 0%로 합격기준을 만족하였으나 GFRP 접착층을 포함시킬 경우 침지박리는 21.85%로 합격기준을 만족하지 못하였고 삶음박리의 경우만 1.45%로 만족하였다.